Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Surface structure and wetting characteristics of Collembola cuticles.

ABSTRACT: The cuticles of the arthropods Collembola (springtails) are known to be superhydrophobic, displaying such properties as water-repellence and plastron formation; overhanging surface structures have been suggested as the source of these properties. Superhydrophobicity is closely related to surface structuring and other surfaces with overhanging structures have been shown to possess robust superhydrophobic properties. In effort to correlate the wetting performance and surface structuring of the cuticles, from both a technical and evolutionary point of view, we investigated a selection of Collembola species including species from several families and covering habitats ranging from aquatic to very dry. The observed contact angles of wetting was in general larger than those predicted by the conventional models. Not all the studied Collembola were found to have superhydrophobic properties, indicating that superhydrophobicity is common, but not a universal trait in Collembola. Overhanging structures were found in some, but not all Collembola species with superhydrophobic cuticles; which leads to the conclusion that there is no direct link between overhanging surface structures and superhydrophobicity in Collembola.

SUBMITTER: Gundersen H

PROVIDER: S-EPMC3911920 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Surface structure determines dynamic wetting.

Project description:Liquid wetting of a surface is omnipresent in nature and the advance of micro-fabrication and assembly techniques in recent years offers increasing ability to control this phenomenon. Here, we identify how surface roughness influences the initial dynamic spreading of a partially wetting droplet by studying the spreading on a solid substrate patterned with microstructures just a few micrometers in size. We reveal that the roughness influence can be quantified in terms of a line friction coefficient for the energy dissipation rate at the contact line, and that this can be described in a simple formula in terms of the geometrical parameters of the roughness and the line-friction coefficient of the planar surface. We further identify a criterion to predict if the spreading will be controlled by this surface roughness or by liquid inertia. Our results point to the possibility of selectively controlling the wetting behavior by engineering the surface structure.

| S-EPMC4329571 | biostudies-literature

Electrostatic cloaking of surface structure for dynamic wetting.

Project description:Dynamic wetting problems are fundamental to understanding the interaction between liquids and solids. Even in a superficially simple experimental situation, such as a droplet spreading over a dry surface, the result may depend not only on the liquid properties but also strongly on the substrate-surface properties; even for macroscopically smooth surfaces, the microscopic geometrical roughness can be important. In addition, because surfaces may often be naturally charged or electric fields are used to manipulate fluids, electric effects are crucial components that influence wetting phenomena. We investigate the interplay between electric forces and surface structures in dynamic wetting. Although surface microstructures can significantly hinder spreading, we find that electrostatics can "cloak" the microstructures, that is, deactivate the hindering. We identify the physics in terms of reduction in contact-line friction, which makes the dynamic wetting inertial force dominant and insensitive to the substrate properties.

| S-EPMC5325542 | biostudies-literature

Wetting characteristics of Colocasia esculenta (Taro) leaf and a bioinspired surface thereof.

Project description:We investigate wetting and water repellency characteristics of Colocasia esculenta (taro) leaf and an engineered surface, bioinspired by the morphology of the surface of the leaf. Scanning electron microscopic images of the leaf surface reveal a two-tier honeycomb-like microstructures, as compared to previously-reported two-tier micropillars on a Nelumbo nucifera (lotus) leaf. We measured static, advancing, and receding angle on the taro leaf and these values are around 10% lesser than those for the lotus leaf. Using standard photolithography techniques, we manufactured bioinspired surfaces with hexagonal cavities of different sizes. The ratio of inner to the outer radius of the circumscribed circle to the hexagon (b/a) was varied. We found that the measured static contact angle on the bioinspired surface varies with b/a and this variation is consistent with a free-energy based model for a droplet in Cassie-Baxter state. The static contact angle on the bioinspired surface is closer to that for the leaf for b/a ? 1. However, the contact angle hysteresis is much larger on these surfaces as compared to that on the leaf and the droplet sticks to the surfaces. We explain this behavior using a first-order model based on force balance on the contact line. Finally, the droplet impact dynamics was recorded on the leaf and different bioinspired surfaces. The droplets bounce on the leaf beyond a critical Weber number (We?~ 1.1), exhibiting remarkable water-repellency characteristics. However, the droplet sticks to the bioinspired surfaces in all cases of We. At larger We, we recorded droplet breakup on the surface with larger b/a and droplet assumes full or partial Wenzel state. The breakup is found to be a function of We and b/a and the measured angles in full Wenzel state are closer to the predictions of the free-energy based model. The sticky bioinspired surfaces are potentially useful in applications such as water-harvesting.

| S-EPMC6976613 | biostudies-literature

Anion Intercalation into Graphite Drives Surface Wetting.

Project description:The unique layered structure of graphite with its tunable interlayer distance establishes almost ideal conditions for the accommodation of ions into its structure. The smooth and chemically inert nature of the graphite surface also means that it is an ideal substrate for electrowetting. Here, we combine these two unique properties of this material by demonstrating the significant effect of anion intercalation on the electrowetting response of graphitic surfaces in contact with concentrated aqueous and organic electrolytes as well as ionic liquids. The structural changes during intercalation/deintercalation were probed using in situ Raman spectroscopy, and the results were used to provide insights into the influence of intercalation staging on the rate and reversibility of electrowetting. We show, by tuning the size of the intercalant and the stage of intercalation, that a fully reversible electrowetting response can be attained. The approach is extended to the development of biphasic (oil/water) systems that exhibit a fully reproducible electrowetting response with a near-zero voltage threshold and unprecedented contact angle variations of more than 120° within a potential window of less than 2 V.

| S-EPMC10103168 | biostudies-literature

Dependence of macroscopic wetting on nanoscopic surface textures.

Project description:The hydrophobicity of a surface can be enhanced by physical textures. However, no existing theories of surface wetting can provide guidance to pinpoint the texture size requirement to achieve super/ultrahydrophobicity. Here, we show that the three-phase contact line tension, tau, is an important link to understand the dependence of macroscopic wetting on physical texture size in an ideal Cassie regime. Specifically, we show that texture size is the dominant parameter in determining surface hydrophobicity when the size approaches a limiting physical length scale, as defined by tau and the surface tension of the liquid.

| S-EPMC2783847 | biostudies-literature

Wetting failure of hydrophilic surfaces promoted by surface roughness.

Project description:Wetting failure is of vital importance to many physical phenomena, such as industrial coating and drop emission. Here we show when and how the surface roughness promotes the destabilization of a moving contact line on a hydrophilic surface. Beyond the balance of the driving force and viscous resistance where a stable wetting interface is sustained, wetting failure occurs and is modified by the roughness of the surface. The promoting effect arises only when the wetting velocity is high enough to create a gas-liquid-solid composite interface in the vicinity of the moving contact line, and it is a function of the intrinsic contact angle and proportion of solid tops. We propose a model to explain splashes of rough solid spheres impacting into liquids. It reveals a novel concept that dynamic wetting on hydrophilic rough surfaces can be similar to that on hydrophobic surfaces, and brings a new way to design surfaces with specific wetting properties.

| S-EPMC4064338 | biostudies-literature

The Influence of Structure Heights and Opening Angles of Micro- and Nanocones on the Macroscopic Surface Wetting Properties.

Project description:We discuss the influence of surface structure, namely the height and opening angles of nano- and microcones on the surface wettability. We show experimental evidence that the opening angle of the cones is the critical parameter on sample superhydrophobicity, namely static contact angles and roll-off angles. The textured surfaces are fabricated on silicon wafers by using a simple one-step method of reactive ion etching at different processing time and gas flow rates. By using hydrophobic coating or hydrophilic surface treatment, we are able to switch the surface wettability from superhydrophilic to superhydrophobic without altering surface structures. In addition, we show examples of polymer replicas (polypropylene and poly(methyl methacrylate) with different wettability, fabricated by injection moulding using templates of the silicon cone-structures.

| S-EPMC4759530 | biostudies-literature

Surface Tension Triggered Wetting and Point of Care Sensor Design.

Project description:Rapid, simple, and inexpensive point-of-care (POC) medical tests are of significant need around the world. The transition between nonwetting and wetted states is used to create instrument-free surface tension sensors for POC diagnosis, using a layered electrospun mesh with incorporated dye to change color upon wetting.

| S-EPMC4790105 | biostudies-literature

Amino acids as wetting agents: surface translocation by Porphyromonas gingivalis.

Project description:Our understanding of how oral microbiota adapt in response to changes in their surroundings remains limited. This is particularly true of the slow-growing anaerobes that persist below the gum line. Here, we report that the oral anaerobe Porphyromonas gingivalis strain 381 can surface translocate when sandwiched between two surfaces. We show that during movement, this bacterium alters its metabolism, specifically side products of arginine utilization including citrulline and ornithine accumulated in the translocating cells; while arginine, N-acetyl-arginine, and the polyamine putrescine, which is produced from arginine were consumed. In addition, our results indicate that movement requires modification of the surrounding environment via proteolysis, cell dispersion, cell-on-cell rolling, and sub-diffusive cell-driven motility. We also show that production of fimbriae and fimbriae-associated proteins; as well as the regulation of contact-dependent growth inhibition genes, which are known to be involved in self-nonself discrimination, and the type IX secretion system are central to surface translocation. These studies provide a first glimpse into P. gingivalis motility and its relationship to ecological variables.

| S-EPMC6775972 | biostudies-literature

Influence of Surface Roughness, Nanostructure, and Wetting on Bacterial Adhesion.

Project description:Bacterial fouling is a persistent problem causing the deterioration and failure of functional surfaces for industrial equipment/components; numerous human, animal, and plant infections/diseases; and energy waste due to the inefficiencies at internal and external geometries of transport systems. This work gains new insights into the effect of surface roughness on bacterial fouling by systematically studying bacterial adhesion on model hydrophobic (methyl-terminated) surfaces with roughness scales spanning from ∼2 nm to ∼390 nm. Additionally, a surface energy integration framework is developed to elucidate the role of surface roughness on the energetics of bacteria and substrate interactions. For a given bacteria type and surface chemistry; the extent of bacterial fouling was found to demonstrate up to a 75-fold variation with surface roughness. For the cases showing hydrophobic wetting behavior, both increased effective surface area with increasing roughness and decreased activation energy with increased surface roughness was concluded to enhance the extent of bacterial adhesion. For the cases of superhydrophobic surfaces, the combination of factors including (i) the surpassing of Laplace pressure force of interstitial air over bacterial adhesive force, (ii) the reduced effective substrate area for bacteria wall due to air gaps to have direct/solid contact, and (iii) the reduction of attractive van der Waals force that holds adhering bacteria on the substrate were summarized to weaken the bacterial adhesion. Overall, this study is significant in the context of designing antifouling coatings and systems as well as explaining variations in bacterial contamination and biofilm formation processes on functional surfaces.

| S-EPMC10848269 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data