Dataset Information

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability.

ABSTRACT: BACKGROUND:A two-stage chemical pretreatment of corn stover is investigated comprising an NaOH pre-extraction followed by an alkaline hydrogen peroxide (AHP) post-treatment. We propose that conventional one-stage AHP pretreatment can be improved using alkaline pre-extraction, which requires significantly less H2O2 and NaOH. To better understand the potential of this approach, this study investigates several components of this process including alkaline pre-extraction, alkaline and alkaline-oxidative post-treatment, fermentation, and the composition of alkali extracts. RESULTS:Mild NaOH pre-extraction of corn stover uses less than 0.1 g NaOH per g corn stover at 80°C. The resulting substrates were highly digestible by cellulolytic enzymes at relatively low enzyme loadings and had a strong susceptibility to drying-induced hydrolysis yield losses. Alkaline pre-extraction was highly selective for lignin removal over xylan removal; xylan removal was relatively minimal (~20%). During alkaline pre-extraction, up to 0.10 g of alkali was consumed per g of corn stover. AHP post-treatment at low oxidant loading (25 mg H2O2 per g pre-extracted biomass) increased glucose hydrolysis yields by 5%, which approached near-theoretical yields. ELISA screening of alkali pre-extraction liquors and the AHP post-treatment liquors demonstrated that xyloglucan and ?-glucans likely remained tightly bound in the biomass whereas the majority of the soluble polymeric xylans were glucurono (arabino) xylans and potentially homoxylans. Pectic polysaccharides were depleted in the AHP post-treatment liquor relative to the alkaline pre-extraction liquor. Because the already-low inhibitor content was further decreased in the alkaline pre-extraction, the hydrolysates generated by this two-stage pretreatment were highly fermentable by Saccharomyces cerevisiae strains that were metabolically engineered and evolved for xylose fermentation. CONCLUSIONS:This work demonstrates that this two-stage pretreatment process is well suited for converting lignocellulose to fermentable sugars and biofuels, such as ethanol. This approach achieved high enzymatic sugars yields from pretreated corn stover using substantially lower oxidant loadings than have been reported previously in the literature. This pretreatment approach allows for many possible process configurations involving novel alkali recovery approaches and novel uses of alkaline pre-extraction liquors. Further work is required to identify the most economical configuration, including process designs using techno-economic analysis and investigating processing strategies that economize water use.

SUBMITTER: Liu T

PROVIDER: S-EPMC3997815 | biostudies-literature | 2014 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability.

Liu Tongjun T Williams Daniel L DL Pattathil Sivakumar S Li Muyang M Hahn Michael G MG Hodge David B DB

Biotechnology for biofuels 20140403 1

<h4>Background</h4>A two-stage chemical pretreatment of corn stover is investigated comprising an NaOH pre-extraction followed by an alkaline hydrogen peroxide (AHP) post-treatment. We propose that conventional one-stage AHP pretreatment can be improved using alkaline pre-extraction, which requires significantly less H2O2 and NaOH. To better understand the potential of this approach, this study investigates several components of this process including alkaline pre-extraction, alkaline and alkali ...[more]

PMID: 24693882

Similar Datasets

Project description:BackgroundLignocellulosic biomass has been commonly regarded as a potential feedstock for the production of biofuels and biochemicals. High sugar yields and the complete bioconversion of all the lignocellulosic sugars into valuable products are attractive for the utilization of lignocelluloses. It is essential to pretreat and hydrolyze lignocelluloses at high solids loadings during industrial processes, which is more economical and environmentally friendly as capital cost, energy consumption, and water usage can be reduced. However, oligosaccharides are inevitably released during the high solids loading enzymatic hydrolysis and they are more recalcitrant than monosaccharides for microorganisms.ResultsA fed-batch enzymatic hydrolysis of corn stover pretreated by the sodium hydroxide-methanol solution (SMs) at high solids loading was demonstrated to reach the high concentrations and yields of fermentable sugars. Glucose, xylose, cello-oligosaccharides, and xylo-oligosaccharides achieved 146.7 g/L, 58.7 g/L, 15.6 g/L, and 24.7 g/L, respectively, when the fed-batch hydrolysis was started at 12% (w/v) solids loading, and 7% fresh substrate and a standardized blend of cellulase, β-glucosidase, and hemicellulase were fed consecutively at 3, 6, 24, and 48 h to achieve a final solids loading of 40% (w/v). The total conversion of glucan and xylan reached 89.5% and 88.5%, respectively, when the oligosaccharides were taken into account. Then, a fed-batch culture on the hydrolysates was investigated for lipid production by Cutaneotrichosporon oleaginosum. Biomass, lipid content, and lipid yield were 50.7 g/L, 61.7%, and 0.18 g/g, respectively. The overall consumptions of cello-oligosaccharides and xylo-oligosaccharides reached 74.1% and 68.2%, respectively.ConclusionsHigh sugars concentrations and yields were achieved when the enzyme blend was supplemented simultaneously with the substrate at each time point of feeding during the fed-batch enzymatic hydrolysis. Oligosaccharides were co-utilized with monosaccharides during the fed-batch culture of C. oleaginosum. These results provide a promising strategy to hydrolyze alkaline organosolv-pretreated corn stover into fermentable sugars with high concentrations and yields for microbial lipid production.

Project description:BackgroundLignocellulosic biomass is recognized as an effective potential substrate for biobutanol production. Though many pretreatment and detoxification methods have been set up, the fermentability of detoxicated lignocellulosic substrate is still far lower than that of starchy feedstocks. On the other hand, the number of recent efforts on rational metabolic engineering approaches to increase butanol production in Clostridium strains is also quite limited, demonstrating the physiological complexity of solventogenic clostridia. In fact, the strain performance is greatly impacted by process control. developing efficient process control strategies could be a feasible solution to this problem.ResultsIn this study, oxidoreduction potential (ORP) controlling was applied to increase the fermentability of enzymatically hydrolyzed steam-exploded corn stover (SECS) for butanol production. When ORP of detoxicated SECS was controlled at - 350 mV, the period of fermentation was shortened by 6 h with an increase of 27.5% in the total solvent (to 18.1 g/L) and 34.2% in butanol (to 10.2 g/L) respectively. Silico modeling revealed that the fluxes of NADPH, NADH and ATP strongly differed between the different scenarios. Quantitative analysis showed that intracellular concentrations of ATP, NADPH/NADP+, and NADH/NAD+ were increased by 25.1%, 81.8%, and 62.5%. ORP controlling also resulted in a 2.1-fold increase in butyraldehyde dehydrogenase, a 1.2-fold increase in butanol dehydrogenase and 29% increase in the cell integrity.ConclusionORP control strategy effectively changed the intracellular metabolic spectrum and significantly improved Clostridium cell growth and butanol production. The working mechanism can be summarized into three aspects: First, Glycolysis and TCA circulation pathways were strengthened through key nodes such as pyruvate carboxylase [EC: 6.4.1.1], which provided sufficient NADH and NADPH for the cell. Second, sufficient ATP was provided to avoid "acid crash". Third, the key enzymes activities regulating butanol biosynthesis and cell membrane integrity were improved.

Dataset Information

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability.

Publications

Coupling alkaline pre-extraction with alkaline-oxidative post-treatment of corn stover to enhance enzymatic hydrolysis and fermentability.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets