Dataset Information

Crystal Engineering of l-Alanine with l-Leucine Additive using Metal-Assisted and Microwave-Accelerated Evaporative Crystallization.

ABSTRACT: In this work, we demonstrated that the change in the morphology of l-alanine crystals can be controlled with the addition of l-leucine using the metal-assisted and microwave accelerated evaporative crystallization (MA-MAEC) technique. Crystallization experiments, where an increasing stoichiometric amount of l-leucine is added to initial l-alanine solutions, were carried out on circular poly(methyl methacrylate) (PMMA) disks modified with a 21-well capacity silicon isolator and silver nanoparticle films using microwave heating (MA-MAEC) and at room temperature (control experiments). The use of the MA-MAEC technique afforded for the growth of l-alanine crystals with different morphologies up to ?10-fold faster than those grown at room temperature. In addition, the length of l-alanine crystals was systematically increased from ?380 to ?2000 ?m using the MA-MAEC technique. Optical microscope images revealed that the shape of l-alanine crystals was changed from tetragonal shape (without l-leucine additive) to more elongated and wire-like structures with the addition of the l-leucine additive. Further characterization of l-alanine crystals was undertaken by Fourier transform infrared (FT-IR) spectroscopy, Raman spectroscopy and powder X-ray diffraction (PXRD) measurements. In order to elucidate the growth mechanism of l-alanine crystals, theoretical simulations of l-alanine's morphology with and without l-leucine additive were carried out using Materials Studio software in conjunction with our experimental data. Theoretical simulations revealed that the growth of l-alanine's {011} and {120} crystal faces were inhibited due to the incorporation of l-leucine into these crystal faces in selected positions.

SUBMITTER: Mojibola A

PROVIDER: S-EPMC4018178 | biostudies-literature | 2014 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Crystal Engineering of l-Alanine with l-Leucine Additive using Metal-Assisted and Microwave-Accelerated Evaporative Crystallization.

Mojibola Adeolu A Dongmo-Momo Gilles G Mohammed Muzaffer M Aslan Kadir K

Crystal growth & design 20140321 5

In this work, we demonstrated that the change in the morphology of l-alanine crystals can be controlled with the addition of l-leucine using the metal-assisted and microwave accelerated evaporative crystallization (MA-MAEC) technique. Crystallization experiments, where an increasing stoichiometric amount of l-leucine is added to initial l-alanine solutions, were carried out on circular poly(methyl methacrylate) (PMMA) disks modified with a 21-well capacity silicon isolator and silver nanoparticl ...[more]

PMID: 24839404

Similar Datasets

Project description:In this paper, we tested a hypothesis that the metal-assisted and microwave-accelerated decrystallization (MAMAD) technique, based on the combined use of low-power medical microwave heating (MWH) and gold nanoparticles (Au NPs), can be used to decrystallize laboratory-prepared monosodium urate monohydrate crystal aggregate (pseudo-tophus) placed in three-dimensional (3D) synthetic human joint models. To simulate a potential treatment of chronic tophaceous gout using the MAMAD technique, we used three different 3D synthetic human joint models and assessed the percent mass reduction (PMR, i.e., decrystallization) of pseudo-tophus and microwave-induced synthetic skin patch damage after MAMAD sessions (a MAMAD session = 120 s of MWH in the presence of Au NPs). Our three synthetic joint models are: Model 1: Application of seven MAMAD sessions in a closed synthetic joint with a pseudo-bursa containing a pseudo-tophus submerged in a solution of 20 nm Au NPs followed by dehydration of pseudo-tophus after each MAMAD session to assess PMR. Model 2: Application of seven MAMAD sessions in a closed or open synthetic joint with a pseudo-bursa containing a pseudo-tophus submerged in a solution of Au NPs followed by intermittent dehydration of pseudo-tophus after seven MAMAD sessions to assess PMR. Model 3: Application of 18 MAMAD sessions in a rotated closed synthetic joint (three sides are heated separately) with a pseudo-bursa containing a pseudo-tophus submerged in a solution of Au NPs followed by dehydration after every three MAMAD sessions to assess PMR. After a single MAMAD session, pseudo-tophus exposed to MWH and Au NPs had an average PMR of 8.30% (up to an overall PMR of 15%), and microwave-induced damage to the synthetic skin can be controlled by the use of a sacrificial skin sample and by adjusting the duration and the number of the MAMAD sessions. Computational electromagnetic simulations predict a 10% absorption of electric field by the pseudo-tophus placed in the synthetic joint models, which led us to conclude that a medical microwave source with higher power than 20 W can potentially be used with the MAMAD technique.

Dataset Information

Crystal Engineering of l-Alanine with l-Leucine Additive using Metal-Assisted and Microwave-Accelerated Evaporative Crystallization.

Publications

Crystal Engineering of l-Alanine with l-Leucine Additive using Metal-Assisted and Microwave-Accelerated Evaporative Crystallization.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets