Dataset Information

Diagnostic accuracy of two-dimensional and three-dimensional imaging and modeling of radial head fractures.

ABSTRACT:

Unlabelled

To tests the hypothesis that classification and characterization of fractures of the radial head is more accurate with 3D than 2D computed tomography images and radiographs, using a prospective study design with intraoperative inspection as the reference standard. Treating surgeons and first assistants completed a questionnaire assigning a fracture type according to the Broberg and Morrey modification of Mason's classification, evaluating selected fracture characteristics, and electing preferred management based upon radiographs and 2D images alone; then adding 3D-CT; then 3D printed physical models; and finally intra-operative visualization. The addition of the 3D CT and physical models improved the sensitivity for fracture line separating the entire head from the neck, comminution of the radial neck, fracture involving the articular surface, articular fracture gap greater than 2 mm, impacted fracture fragments, greater than 3 articular fragments, and articular fragments judged too small to repair. There were no significant differences in diagnostic performance with the addition of 3D models. The addition of 3D CT and models improved the reliability of Broberg and Morrey classification. We conclude that 3DCT and 3D physical modeling provide more accurate fracture classification and characterization of fracture of the radial head with less proposed variability in treatment. We did not demonstrate a clear advantage for modeling over 3DCT reconstructions.

Level of evidence

Diagnostic, Level I.

SUBMITTER: Guitton TG

PROVIDER: S-EPMC4037434 | biostudies-literature | 2014 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Diagnostic accuracy of two-dimensional and three-dimensional imaging and modeling of radial head fractures.

Guitton Thierry G TG Brouwer Kim K Lindenhovius Anneluuk L C AL Dyer George G Zurakowski David D Mudgal Chaitanya S CS Ring David C DC

Journal of hand and microsurgery 20131112 1

<h4>Unlabelled</h4>To tests the hypothesis that classification and characterization of fractures of the radial head is more accurate with 3D than 2D computed tomography images and radiographs, using a prospective study design with intraoperative inspection as the reference standard. Treating surgeons and first assistants completed a questionnaire assigning a fracture type according to the Broberg and Morrey modification of Mason's classification, evaluating selected fracture characteristics, and ...[more]

PMID: 24876684

Similar Datasets

Project description:BackgroundPeripheral pulmonary lesion (PPL) incidence is rising because of increased chest imaging sensitivity and frequency. For PPLs suspicious for lung cancer, current clinical guidelines recommend tissue diagnosis. Radial endobronchial ultrasound (R-EBUS) is a bronchoscopic technique used for this purpose. It has been observed that diagnostic yield is impacted by the ability to accurately manipulate the radial probe. However, such skills can be acquired, in part, from simulation training. Three-dimensional (3D) printing has been used to produce training simulators for standard bronchoscopy but has not been specifically used to develop similar tools for R-EBUS.ObjectiveWe report the development of a novel ultrasound-compatible, anatomically accurate 3D-printed R-EBUS simulator and evaluation of its utility as a training tool.MethodsComputed tomography images were used to develop 3D-printed airway models with ultrasound-compatible PPLs of "low" and "high" technical difficulty. Twenty-one participants were allocated to two groups matched for prior R-EBUS experience. The intervention group received 15 minutes to pretrain R-EBUS using a 3D-printed model, whereas the nonintervention group did not. Both groups then performed R-EBUS on 3D-printed models and were evaluated using a specifically developed assessment tool.ResultsFor the "low-difficulty" model, the intervention group achieved a higher score (21.5 ± 2.02) than the nonintervention group (17.1 ± 5.7), reflecting 26% improvement in performance (P = 0.03). For the "high-difficulty" model, the intervention group scored 20.2 ± 4.21 versus 13.3 ± 7.36, corresponding to 52% improvement in performance (P = 0.02). Participants derived benefit from pretraining with the 3D-printed model, regardless of prior experience level.Conclusion3D-printing can be used to develop simulators for R-EBUS education. Training using these models significantly improves procedural performance and is effective in both novice and experienced trainees.

Project description:BackgroundOperative indications for supination-external rotation (SER) ankle fractures depend on the integrity of the medial structures. Despite the importance of assessing deep deltoid ligament injuries, the accuracy of common diagnostic tests has not been established.Questions/purposesThe objective of this study was to compare the ability of injury (non-stress) and stress radiographs and magnetic resonance imaging (MRI) to diagnose deep deltoid ligament ruptures in operative SER ankle fractures.MethodsPatients were included who underwent surgical fixation of SER ankle fractures and had appropriate injury and manual stress test radiographs, pre-operative ankle MRI, and intra-operative assessment of deep deltoid integrity by direct visualization. The medial clear space (MCS) was considered positive for all values over 5 mm on the injury or stress mortise radiographs. MRI analysis of the deep deltoid ligament injury was performed by blinded fellowship-trained musculoskeletal radiologists. Intra-operative direct visualization and assessment of the deltoid was performed using a direct medial ankle approach at the time of operative fracture fixation.ResultsUsing intra-operative visualization as the gold standard, MCS measurements and MRI had differing abilities to diagnose a deep deltoid rupture. In cases where the MCS was less than 5 mm on injury radiographs and stress tests were performed, MCS measurements were much less accurate than MRI in predicting deltoid ruptures (46% versus 79%, respectively) with a high false positive rate (80%). In contrast, an MCS measurement of greater than 5 mm on injury radiographs was a strong predictor of deep deltoid rupture (accuracy of 95%).ConclusionCompared with direct visualization of the deltoid ligament intra-operatively, these data support proceeding with surgery when the MCS on injury radiographs is greater than 5 mm without any additional stress tests or advanced imaging. When the MCS is less than 5 mm, we recommend MRI analysis because of its increased accuracy and decreased false positive rate. Improving our ability to diagnose deltoid ruptures will contribute to more effective management of patients with SER ankle fractures.

Project description:Background and objectivesAcoustic wave therapy is a novel facial tightening technique that involves nonthermal penetration of the skin and subcutaneous tissue, affecting cells and their metabolism, and resulting in an increased release of unwanted fat and activation of blood and lymphatic flow in tissues. The objective of this study was to investigate the effectiveness of acoustic wave therapy.Study design/materials and methodsA total of 333 patients underwent multiple facial tightening treatment sessions using focused and radial acoustic waves. Each patient received 2,000-3,000 pulses of focused acoustic waves at a power of 0.45-0.88 mJ/mm2 with a pulse frequency of 3-5 Hz and 4,000 pulses of radial acoustic waves at 4-bar power at a frequency of 21 Hz. These sessions were performed more than three times, and treatments were repeated at 1-month intervals. Digital photographs superimposed three-dimensional volumetric assessments, and three-dimensional skin surface displacement calculations using vectors were used to evaluate the results 12 months after the last treatment. Patients also evaluated the results using a 5-point Likert scale.ResultsImprovements in skin texture, clarity, and laxity were observed in digital photographs. Superimposed three-dimensional color images showed marked volumetric reduction and/or formative modification for even contour toward the lower mid-face. Most vectors showed three-dimensional skin surface displacement at the lateral sides of the temples, cheeks, and chin, in an upward direction. These results were obtained and sustained for up to 12 months without edematous reactions. Almost all patients reported improvement, with 79% reporting "good" or "excellent" improvement. Complications were minor and transitory. Persistent side effects were not observed.ConclusionAcoustic wave therapy could be used as a standard facial tightening treatment, with skin rejuvenation effects shown on digital photographs and three-dimensional quantification assessments. This noninvasive acoustic wave approach was found to be a safe, long-lasting, and effective method for facial tightening. Lasers Surg. Med. 00:00-00, 2020. © 2020 Wiley Periodicals LLC.

Dataset Information

Diagnostic accuracy of two-dimensional and three-dimensional imaging and modeling of radial head fractures.

Unlabelled

Level of evidence

Publications

Diagnostic accuracy of two-dimensional and three-dimensional imaging and modeling of radial head fractures.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets