Dataset Information

Life cycle assessment of metals: a scientific synthesis.

ABSTRACT: We have assembled extensive information on the cradle-to-gate environmental burdens of 63 metals in their major use forms, and illustrated the interconnectedness of metal production systems. Related cumulative energy use, global warming potential, human health implications and ecosystem damage are estimated by metal life cycle stage (i.e., mining, purification, and refining). For some elements, these are the first life cycle estimates of environmental impacts reported in the literature. We show that, if compared on a per kilogram basis, the platinum group metals and gold display the highest environmental burdens, while many of the major industrial metals (e.g., iron, manganese, titanium) are found at the lower end of the environmental impacts scale. If compared on the basis of their global annual production in 2008, iron and aluminum display the largest impacts, and thallium and tellurium the lowest. With the exception of a few metals, environmental impacts of the majority of elements are dominated by the purification and refining stages in which metals are transformed from a concentrate into their metallic form. Out of the 63 metals investigated, 42 metals are obtained as co-products in multi output processes. We test the sensitivity of varying allocation rationales, in which the environmental burden are allocated to the various metal and mineral products, on the overall results. Monte-Carlo simulation is applied to further investigate the stability of our results. This analysis is the most comprehensive life cycle comparison of metals to date and allows for the first time a complete bottom-up estimate of life cycle impacts of the metals and mining sector globally. We estimate global direct and indirect greenhouse gas emissions in 2008 at 3.4 Gt CO2-eq per year and primary energy use at 49 EJ per year (9.5% of global use), and report the shares for all metals to both impact categories.

SUBMITTER: Nuss P

PROVIDER: S-EPMC4085040 | biostudies-literature | 2014

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Life cycle assessment of metals: a scientific synthesis.

Nuss Philip P Eckelman Matthew J MJ

PloS one 20140707 7

We have assembled extensive information on the cradle-to-gate environmental burdens of 63 metals in their major use forms, and illustrated the interconnectedness of metal production systems. Related cumulative energy use, global warming potential, human health implications and ecosystem damage are estimated by metal life cycle stage (i.e., mining, purification, and refining). For some elements, these are the first life cycle estimates of environmental impacts reported in the literature. We show ...[more]

PMID: 24999810

Similar Datasets

Project description:PurposeA surplus cost potential (SCP) indicator has been developed as a measure of resource scarcity in the life cycle impact assessment (LCIA) context. To date, quality SCP estimates for other minerals than fossils are either not yet available or suffer methodological and data limitations. This paper overcomes these limitations and demonstrate how SCP estimates for metals can be calculated without the utilisation of ore grade function and by collecting primary economic and geological data.MethodsData were collected in line with the geographical distribution, mine type, deposit type and production volumes and total production costs in order to construct cost-cumulative availability curves for platinum group metals (PGMs) and lithium. These curves capture the total amount of known mineral resources that can be recovered profitably at various prices from different types of mineral deposits under current conditions (this is, current technology, prevailing labour and other input prices). They served as a basis for modelling the marginal cost increase, a necessary parameter for estimating the SCP indicator. Surplus costs were calculated for different scenario projections for future mineral production considering future market dynamics, recyclability rates, demand-side technological developments and economic growth and by applying declining social discount rate.Results and discussionSurplus costs were calculated for three mineral production scenarios, ranging from (US$2014/kg) 6545-8354 for platinum, 3583-4573 for palladium, 8281-10,569 for rhodium, 513-655 for ruthenium, 3201-4086 for iridium and 1.70-5.80 for lithium. Compared with the current production costs, the results indicate that problematic price increases of lithium are unlikely if the latest technological trends in the automotive sector will continue up to 2070. Surplus costs for PGMs are approximately one-third of the current production costs in all scenarios; hence, a threat of their price increases by 2070 will largely depend on the discovery of new deposits and the ability of new technologies to push these costs down over time. This also applies to lithium if the increasing electrification of road transport will continue up to 2070.ConclusionsThis study provides useful insight into the availability of PGMs and lithium up to 2070. It proves that if time and resources permit, reliable surplus cost estimates can be calculated, at least in the short-run, based on the construction of one's own curves with the level of quality comparable to expert-driven consulting services. Modelling and incorporating unknown deposits and potential future mineral production costs into these curves is the subject of future work.

Project description:PurposeAs capture fishery production has reached its limits and global demand for aquatic products is still increasing, aquaculture has become the world's fastest growing animal production sector. In attempts to evaluate the environmental consequences of this rapid expansion, life cycle assessment (LCA) has become a frequently used method. The present review of current peer-reviewed literature focusing on LCA of aquaculture systems is intended to clarify the methodological choices made, identify possible data gaps, and provide recommendations for future development within this field of research. The results of this review will also serve as a start-up activity of the EU FP7 SEAT (Sustaining Ethical Aquaculture Trade) project, which aims to perform several LCA studies on aquaculture systems in Asia over the next few years.MethodsFrom a full analysis of methodology in LCA, six phases were identified to differ the most amongst ten peer-reviewed articles and two PhD theses (functional unit, system boundaries, data and data quality, allocation, impact assessment methods, interpretation methods). Each phase is discussed with regards to differences amongst the studies, current LCA literature followed by recommendations where appropriate. The conclusions and recommendations section reflects on aquaculture-specific scenarios as well as on some more general issues in LCA.ResultsAquaculture LCAs often require large system boundaries, including fisheries, agriculture, and livestock production systems from around the globe. The reviewed studies offered limited coverage of production in developing countries, low-intensity farming practices, and non-finfish species, although most farmed aquatic products originate from a wide range of farming practices in Asia. Apart from different choices of functional unit, system boundaries and impact assessment methods, the studies also differed in their choice of allocation factors and data sourcing. Interpretation of results also differed amongst the studies, and a number of methodological choices were identified influencing the outcomes.Conclusions and recommendationsEfforts should be made to increase transparency to allow the results to be reproduced, and to construct aquaculture related database(s). More extensive data reporting, including environmental flows, within the greater field of LCA could be achieved, without compromising the focus of studies, by providing supporting information to articles and/or reporting only ID numbers from background databases. More research is needed into aquaculture in Asia based on the latest progress made by the LCA community.

Dataset Information

Life cycle assessment of metals: a scientific synthesis.

Publications

Life cycle assessment of metals: a scientific synthesis.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets