Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hierarchical Si/ZnO trunk-branch nanostructure for photocurrent enhancement.

ABSTRACT: Hierarchical Si/ZnO trunk-branch nanostructures (NSs) have been synthesized by hot wire assisted chemical vapor deposition method for trunk Si nanowires (NWs) on indium tin oxide (ITO) substrate and followed by the vapor transport condensation (VTC) method for zinc oxide (ZnO) nanorods (NRs) which was laterally grown from each Si nanowires (NWs). A spin coating method has been used for zinc oxide (ZnO) seeding. This method is better compared with other group where they used sputtering method for the same process. The sputtering method only results in the growth of ZnO NRs on top of the Si trunk. Our method shows improvement by having the growth evenly distributed on the lateral sides and caps of the Si trunks, resulting in pine-leave-like NSs. Field emission scanning electron microscope image shows the hierarchical nanostructures resembling the shape of the leaves of pine trees. Single crystalline structure for the ZnO branch grown laterally from the crystalline Si trunk has been identified by using a lattice-resolved transmission electron microscope. A preliminary photoelectrochemical (PEC) cell testing has been setup to characterize the photocurrent of sole array of ZnO NR growth by both hydrothermal-grown (HTG) method and VTC method on ITO substrates. VTC-grown ZnO NRs showed greater photocurrent effect due to its better structural properties. The measured photocurrent was also compared with the array of hierarchical Si/ZnO trunk-branch NSs. The cell with the array of Si/ZnO trunk-branch NSs revealed four-fold magnitude enhancement in photocurrent density compared with the sole array of ZnO NRs obtain from VTC processes.

SUBMITTER: Dee CF

PROVIDER: S-EPMC4160322 | biostudies-literature | 2014

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

ZnO Hierarchical Nanostructure Photoanode in a CdS Quantum Dot-Sensitized Solar Cell.

Project description:A hierarchical array of ZnO nanocones covered with ZnO nanospikes was hydrothermally fabricated and employed as the photoanode in a CdS quantum dot-sensitized solar cell (QDSSC). This QDSSC outperformed the QDSSC based on a simple ZnO nanocone photoanode in all the four principal photovoltaic parameters. Using the hierarchical photoanode dramatically increased the short circuit current density and also slightly raised the open circuit voltage and the fill factor. As a result, the conversion efficiency of the QDSSC based on the hierarchical photoanode was more than twice that of the QDSSC based on the simple ZnO nanocone photoanode. This improvement is attributable to both the enlarged specific area of the photoanode and the reduction in the recombination of the photoexcited electrons.

| S-EPMC4574909 | biostudies-literature

ZnO/CuO/M (M = Ag, Au) Hierarchical Nanostructure by Successive Photoreduction Process for Solar Hydrogen Generation.

Project description:To date, solar energy generation devices have been widely studied to meet a clean and sustainable energy source. Among them, water splitting photoelectrochemical cell is regarded as a promising energy generation way for splitting water molecules and generating hydrogen by sunlight. While many nanostructured metal oxides are considered as a candidate, most of them have an improper bandgap structure lowering energy transition efficiency. Herein, we introduce a novel wet-based, successive photoreduction process that can improve charge transfer efficiency by surface plasmon effect for a solar-driven water splitting device. The proposed process enables to fabricate ZnO/CuO/Ag or ZnO/CuO/Au hierarchical nanostructure, having an enhanced electrical, optical, photoelectrochemical property. The fabricated hierarchical nanostructures are demonstrated as a photocathode in the photoelectrochemical cell and characterized by using various analytic tools.

| S-EPMC5977337 | biostudies-literature

Localized surface plasmon resonances dominated giant lateral photovoltaic effect observed in ZnO/Ag/Si nanostructure.

Project description:We report substantially enlarged lateral photovoltaic effect (LPE) in the ZnO/Ag/Si nanostructures. The maximum LPE sensitivity (55.05 mv/mm) obtained in this structure is about seven times larger than that observed in the control sample (7.88 mv/mm) of ZnO/Si. We attribute this phenomenon to the strong localized surface plasmon resonances (LSPRs) induced by nano Ag semicontinuous films. Quite different from the traditional LPE in PN junction type structures, in which light-generated carriers contributed to LPE merely depends on direct excitation of light in semiconductor, this work firstly demonstrates that, by introducing a super thin metal Ag in the interface between two different kinds of semiconductors, the nanoscale Ag embedded in the interface will produce strong resonance of localized field, causing extra intraband excitation, interband excitation and an enhanced direct excitation. As a consequence, these LSPRs dominated contributions harvest much more carriers, giving rise to a greatly enhanced LPE. In particular, this LSPRs-driven mechanism constitutes a sharp contrast to the traditional LPE operation mechanism. This work suggests a brand new LSPRs approach for tailoring LPE-based devices and also opens avenues of research within current photoelectric sensors area.

| S-EPMC4786795 | biostudies-other

The Facile Synthesis of Branch-Trunk Ag Hierarchical Nanostructures and Their Applications for High-Performance H?O? Electrochemical Sensors.

Project description:A novel branch-trunk Ag hierarchical nanostructure was synthesized via a galvanic replacement reaction combined with microwave-assisted synthesis using Te nanowire as a sacrificial template. The Te nanowire was synthesized via a hydrothermal process. We further investigated the potential application of the obtained hierarchical nanostructures in electrochemical sensor analysis. The results showed that the as-prepared sensor exhibited a wide linear range with 0.05 µM to 1.925 mM (R = 0.998) and the detection limit was estimated to be 0.013 µM (S/N = 3). These results indicate the branch-truck Ag hierarchical nanostructures are an excellent candidate material for sensing applications.

| S-EPMC5751687 | biostudies-other

Modulation of ZnO Nanostructure for Efficient Photocatalytic Performance.

Project description:Structure has been considered to play an important role in photocatalytic performance of the semiconductors, but the intrinsic factors were rarely revealed. Herein, ZnO nanomaterials in the structures of thin film, nanowire array and nanosheet array were synthesized, and their structural characteristics, optical properties, photocurrent response and photocatalytic efficiency were compared with each other for illustrating the issue. The photoluminescence intensity decreased in the order of nanosheets, thin film and nanowires for improved lifetime of the photoexcited charges. The absorption of the nanosheets and nanowires improved obviously in the visible range with a redshift of the absorption edge than that of the thin film. The nanowires possessed the highest response current of 82.65 μA at a response time of 2.0 ms in a sensitivity of 87.93 at the light frequency of 1 Hz, and gained the largest catalytic efficiency of 2.45 μg/cm2 h for the methylene blue degradation in UV light. Nevertheless, the improvement of catalytic efficiency of the nanosheets (up to 42.4%) was much larger than that of nanowires (5.7%) and thin film (2.6%) for the Au coating. The analysis revealed that the photocatalytic efficiency of the ZnO nanomaterials was modulated by the structure as it contained different surface area, roughness, defect and doping states, vacancies, polar and non-polar crystalline faces, which would provide structural design of semiconductor nanomaterials for the photoelectric and photocatalytic applications.

| S-EPMC9733757 | biostudies-literature

FeO-Based Hierarchical Structures on FTO Substrates and Their Photocurrent.

Project description:As one of the most promising photoanode materials for photoelectrochemical (PEC) water oxidation, earth-abundant hematite has been severely restricted by its poor electrical conductivity, poor charge separation, and sluggish oxygen evolution reaction kinetics. FeO has an ability to produce hydrogen, while its preparation needs high temperature to reduce Fe3+ to Fe2+ by using H2 or CO gases. Here, Fe2O3- and FeO-based nanorods (NRs) on fluorine-doped tin oxide (FTO) substrate have been prepared, where the latter was obtained by doping Sn4+ ions in FeOOH to reduce Fe3+ ions to Fe2+. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) measurements indicate that the dominant content of Fe element on the surface of Sn-doped Fe2O3 and Sn-FeOOH samples is Fe2+. FeO-based NRs have a Fe3O2/FeO heterostructure with some SnO2 nanoparticles distributed on their surface. These prepared samples were used as PEC photoanodes under a visible-light irradiation. The results showed that the modified FeO-based NRs have a photocurrent density of 0.2 mA cm-2 at 1.23 V vs reference hydrogen electrode (RHE) using Hg/HgO electrode as the reference electrode. Furthermore, they also have a better photocatalytic hydrogen evolution activity with a rate of 2.3 μmol h-1 cm-1. The improved photocurrent and photocatalytic activity can be ascribed to the Sn-dopant, as the introduction of Sn4+ not only leads to the formation of the Fe3O2/FeO heterostructure but also increases the carrier concentration. Fe3O2/FeO heterostructure with SnO2 nanoparticles on its surface has a good band energy alignment, which is beneficial to the PEC water oxidation and reduction.

| S-EPMC7016909 | biostudies-literature

Hierarchical nanostructure and synergy of multimolecular signalling complexes.

Project description:Signalling complexes are dynamic, multimolecular structures and sites for intracellular signal transduction. Although they play a crucial role in cellular activation, current research techniques fail to resolve their structure in intact cells. Here we present a multicolour, photoactivated localization microscopy approach for imaging multiple types of single molecules in fixed and live cells and statistical tools to determine the nanoscale organization, topology and synergy of molecular interactions in signalling complexes downstream of the T-cell antigen receptor. We observe that signalling complexes nucleated at the key adapter LAT show a hierarchical topology. The critical enzymes PLCγ1 and VAV1 localize to the centre of LAT-based complexes, and the adapter SLP-76 and actin molecules localize to the periphery. Conditional second-order statistics reveal a hierarchical network of synergic interactions between these molecules. Our results extend our understanding of the nanostructure of signalling complexes and are relevant to studying a wide range of multimolecular complexes.

| S-EPMC4942584 | biostudies-literature

Monolithic InSb nanostructure photodetectors on Si using rapid melt growth.

Project description:Monolithic integration of InSb on Si could be a key enabler for future electronic and optoelectronic applications. In this work, we report the fabrication of InSb metal-semiconductor-metal photodetectors directly on Si using a CMOS-compatible process known as rapid melt growth. Fourier transform spectroscopy demonstrates a spectrally resolved photocurrent peak from a single crystalline InSb nanostructure with dimensions of 500 nm × 1.1 μm × 120 nm. Time-dependent optical characterization of a device under 1550 nm illumination indicated a stable photoresponse with responsivity of 0.50 A W-1 at 16 nW illumination, with a time constant in the range of milliseconds. Electron backscatter diffraction spectroscopy revealed that the single crystalline InSb nanostructures contain occasional twin defects and crystal lattice twist around the growth axis, in addition to residual strain, possibly causing the observation of a low-energy tail in the detector response extending the photosensitivity out to 10 μm wavelengths (0.12 eV) at 77 K.

| S-EPMC9926903 | biostudies-literature

Integrated spectral photocurrent density and reproducibility analyses of excitonic ZnO/NiO heterojunction.

Project description:In this data article, the excitonic ZnO/NiO heterojunction device (Patel et al., 2017) [1] was measured for the integrated photocurrent density and reproducibility. Photograph of the prepared devices of ZnO/NiO on the FTO/glass is presented. Integrated photocurrent density as a function of photon energy from the sunlight is presented. Quantum efficiency measurement system (McScienceK3100, Korea) compliance with International Measurement System was employed to measure ZnO/NIO devices. These data are shown for the 300-440 nm of segment of the sunlight (AM1.5G, http://rredc.nrel.gov/solar/spectra/am1.5/). Reproducibility measure of ZnO/NiO device was presented for nine devices with the estimated device performance parameters including the open circuit voltage, short circuit current density, fill factor and power conversion efficiency.

| S-EPMC5614732 | biostudies-literature

Nanostructure of Porous Si and Anodic SiO2 Surface Passivation for Improved Efficiency Porous Si Solar Cells.

Project description:The photovoltaic effect in the anodic formation of silicon dioxide (SiO2) on porous silicon (PS) surfaces was investigated toward developing a potential passivation technique to achieve high efficiency nanostructured Si solar cells. The PS layers were prepared by electrochemical anodization in hydrofluoric acid (HF) containing electrolyte. An anodic SiO2 layer was formed on the PS surface via a bottom-up anodization mechanism in HCl/H2O solution at room temperature. The thickness of the oxide layer for surface passivation was precisely controlled by adjusting the anodizing current density and the passivation time, for optimal oxidation on the PS layer while maintaining its original nanostructure. HRTEM characterization of the microstructure of the PS layer confirms an atomic lattice matching at the PS/Si interface. The dependence of photovoltaic performance, series resistance, and shunt resistance on passivation time was examined. Due to sufficient passivation on the PS surface, a sample with anodization duration of 30 s achieved the best conversion efficiency of 10.7%. The external quantum efficiency (EQE) and internal quantum efficiency (IQE) indicate a significant decrease in reflectivity due to the PS anti-reflection property and indicate superior performance due to SiO2 surface passivation. In conclusion, the surface of PS solar cells could be successfully passivated by electrochemical anodization.

| S-EPMC7916900 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data