Dataset Information

FeO-Based Hierarchical Structures on FTO Substrates and Their Photocurrent.

ABSTRACT: As one of the most promising photoanode materials for photoelectrochemical (PEC) water oxidation, earth-abundant hematite has been severely restricted by its poor electrical conductivity, poor charge separation, and sluggish oxygen evolution reaction kinetics. FeO has an ability to produce hydrogen, while its preparation needs high temperature to reduce Fe3+ to Fe2+ by using H2 or CO gases. Here, Fe2O3- and FeO-based nanorods (NRs) on fluorine-doped tin oxide (FTO) substrate have been prepared, where the latter was obtained by doping Sn4+ ions in FeOOH to reduce Fe3+ ions to Fe2+. X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) measurements indicate that the dominant content of Fe element on the surface of Sn-doped Fe2O3 and Sn-FeOOH samples is Fe2+. FeO-based NRs have a Fe3O2/FeO heterostructure with some SnO2 nanoparticles distributed on their surface. These prepared samples were used as PEC photoanodes under a visible-light irradiation. The results showed that the modified FeO-based NRs have a photocurrent density of 0.2 mA cm-2 at 1.23 V vs reference hydrogen electrode (RHE) using Hg/HgO electrode as the reference electrode. Furthermore, they also have a better photocatalytic hydrogen evolution activity with a rate of 2.3 ?mol h-1 cm-1. The improved photocurrent and photocatalytic activity can be ascribed to the Sn-dopant, as the introduction of Sn4+ not only leads to the formation of the Fe3O2/FeO heterostructure but also increases the carrier concentration. Fe3O2/FeO heterostructure with SnO2 nanoparticles on its surface has a good band energy alignment, which is beneficial to the PEC water oxidation and reduction.

SUBMITTER: Xia W

PROVIDER: S-EPMC7016909 | biostudies-literature | 2020 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

FeO-Based Hierarchical Structures on FTO Substrates and Their Photocurrent.

Xia Weiwei W Sun Jiawei J Zeng Xianghua X Wang Pengdi P Luo Min M Dong Jing J Yu Huaguang H

ACS omega 20200203 5

As one of the most promising photoanode materials for photoelectrochemical (PEC) water oxidation, earth-abundant hematite has been severely restricted by its poor electrical conductivity, poor charge separation, and sluggish oxygen evolution reaction kinetics. FeO has an ability to produce hydrogen, while its preparation needs high temperature to reduce Fe3+ to Fe2+ by using H2 or CO gases. Here, Fe2O3- and FeO-based nanorods (NRs) on fluori ...[more]

PMID: 32064381

Similar Datasets

Project description:Carrier transport was studied both numerically and experimentally using scanning photocurrent microscopy (SPCM) in two-dimensional (2D) transport structures, where the structure size in the third dimension is much smaller than the diffusion length and electrodes cover the whole terminal on both sides. Originally, one would expect that with increasing width in 2D transport structures, scanning photocurrent profiles will gradually deviate from those of the ideal one-dimensional (1D) transport structure. However, the scanning photocurrent simulation results surprisingly showed almost identical profiles from structures with different widths. In order to clarify this phenomenon, we observed the spatial distribution of carriers. The simulation results indicate that the integrated carrier distribution in the 2D transport structures with finite width can be well described by a simple-exponential-decay function with the carrier decay length as the fitting parameter, just like in the 1D transport structures. For ohmic-contact 2D transport structures, the feasibility of the fitting formula from our previous 1D analytical model was confirmed. On the other hand, the application of a simple-exponential-decay function in scanning photocurrent profiles for the diffusion length extraction in Schottky-contact 2D transport structures was also justified. Furthermore, our simulation results demonstrate that the scanning photocurrent profiles in the ohmic- or Schottky-contact three-dimensional (3D) transport structures with electrodes covering the whole terminal on both sides will reduce to those described by the corresponding 1D fitting formulae. Finally, experimental SPCM on a p-type InGaAs air-bridge two-terminal thin-film device was carried out. The measured photocurrent profiles can be well fitted by the specific fitting formula derived from our previous 1D analytical model and the extracted electron mobility-lifetime product of this thin-film device is 6.6 × 10-7 cm2·V-1. This study allows us to extract the minority carrier decay length and to obtain the mobility-lifetime product which can be used to evaluate the performance of 2D carrier transport devices.

Dataset Information

FeO-Based Hierarchical Structures on FTO Substrates and Their Photocurrent.

Publications

FeO-Based Hierarchical Structures on FTO Substrates and Their Photocurrent.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets