Dataset Information

Image-Guided Radiotherapy Using a Modified Industrial Micro-CT for Preclinical Applications.

ABSTRACT:

Purpose/objective

Although radiotherapy is a key component of cancer treatment, its implementation into pre-clinical in vivo models with relatively small target volumes is frequently omitted either due to technical complexity or expected side effects hampering long-term observational studies. We here demonstrate how an affordable industrial micro-CT can be converted into a small animal IGRT device at very low costs. We also demonstrate the proof of principle for the case of partial brain irradiation of mice carrying orthotopic glioblastoma implants.

Methods/materials

A commercially available micro-CT originally designed for non-destructive material analysis was used. It consists of a CNC manipulator, a transmission X-ray tube (10-160 kV) and a flat-panel detector, which was used together with custom-made steel collimators (1-5 mm aperture size). For radiation field characterization, an ionization chamber, water-equivalent slab phantoms and radiochromic films were used. A treatment planning tool was implemented using a C++ application. For proof of principle, NOD/SCID/?c(-/-) mice were orthotopically implanted with U87MG high-grade glioma cells and irradiated using the novel setup.

Results

The overall symmetry of the radiation field at 150 kV was 1.04 ± 0.02%. The flatness was 4.99 ± 0.63% and the penumbra widths were between 0.14 mm and 0.51 mm. The full width at half maximum (FWHM) ranged from 1.97 to 9.99 mm depending on the collimator aperture size. The dose depth curve along the central axis followed a typical shape of keV photons. Dose rates measured were 10.7 mGy/s in 1 mm and 7.6 mGy/s in 5 mm depth (5 mm collimator aperture size). Treatment of mice with a single dose of 10 Gy was tolerated well and resulted in central tumor necrosis consistent with therapeutic efficacy.

Conclusion

A conventional industrial micro-CT can be easily modified to allow effective small animal IGRT even of critical target volumes such as the brain.

SUBMITTER: Felix MC

PROVIDER: S-EPMC4438006 | biostudies-literature | 2015

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Image-Guided Radiotherapy Using a Modified Industrial Micro-CT for Preclinical Applications.

Felix Manuela C MC Fleckenstein Jens J Kirschner Stefanie S Hartmann Linda L Wenz Frederik F Brockmann Marc A MA Glatting Gerhard G Giordano Frank A FA

PloS one 20150519 5

<h4>Purpose/objective</h4>Although radiotherapy is a key component of cancer treatment, its implementation into pre-clinical in vivo models with relatively small target volumes is frequently omitted either due to technical complexity or expected side effects hampering long-term observational studies. We here demonstrate how an affordable industrial micro-CT can be converted into a small animal IGRT device at very low costs. We also demonstrate the proof of principle for the case of partial brain ...[more]

PMID: 25993010

Similar Datasets

Project description:We report the results of a retrospective analysis of localized prostate cancer (LPCa) treated with transperineal ultrasound image-guided radiotherapy (TPUS-IGRT). A total of 124 patients (median age: 74 y, 46-84 y) with LPCa who underwent TPUS-IGRT (Clarity Autoscan system; CAS, Elekta; Stockholm, Sweden) between April 2016 and October 2021 for curative/after hormone induction were enrolled. The number of patients by risk (National Comprehensive Cancer Network 2019) was 7, 25, 42, and 50 for low (LR), good intermediate (good IR), poor intermediate (poor IR), and high (HR)/very high (VHR), respectively. Ninety-five patients were given neoadjuvant hormonal therapy. The planning target volume margin setting was 3 mm for rectal in most cases, 5-7 mm for superior/inferior, and 5 mm for anterior/right/left. The principle prescribed dose is 74 Gy (LR), 76 Gy (good IR), and 76-78 Gy (poor IR or above). CAS was equipped with a real-time prostate intrafraction monitoring (RTPIFM) system. When a displacement of 2-3 mm or more was detected, irradiation was paused, and the patients were placed on standby for prostate reinstatement/recorrection. Of the 3135 fractions in 85 patients for whom RTPIFM was performed, 1008 fractions (32.1%) were recorrected at least once after starting irradiation. A total of 123 patients completed the radiotherapy course. The 5-year overall survival rate was 95.9%. The 5-year biological prostate-specific antigen relapse-free survival rate (bPFS) was 100% for LR, 92.9% for intermediate IR, and 93.2% for HR/VHR (Phoenix method). The 5-year late toxicity rate of Grade 2+ was 7.4% for genitourinary (GU) and 6.5% for gastrointestinal (GI) organs. Comparing the ≤ 76 Gy group to the 78 Gy group for both GU and GI organs, the incidence was higher in the 78 Gy group for both groups. These results suggest that TPUS-IGRT is well tolerated, as the bPFS and incidence of late toxicity are almost comparable to those reported by other sources of image-guided radiotherapy.

Project description:Background Magnetic resonance imaging (MRI) is currently used for online target monitoring and plan adaptation in modern image-guided radiotherapy. However, storing a large amount of data accumulated during patient treatment becomes an issue. In this study, the feasibility to compress MRI images accumulated in MR-guided radiotherapy using video encoders was investigated. Methods Two sorting algorithms were employed to reorder the slices in multiple MRI sets for the input sequence of video encoder. Three cropping algorithms were used to auto-segment regions of interest for separate data storage. Four video encoders, motion-JPEG (M-JPEG), MPEG-4 (MP4), Advanced Video Coding (AVC or H.264) and High Efficiency Video Coding (HEVC or H.265) were investigated. The compression performance of video encoders was evaluated by compression ratio and time, while the restoration accuracy of video encoders was evaluated by mean square error (MSE), peak signal-to-noise ratio (PSNR), and video quality matrix (VQM). The performances of all combinations of video encoders, sorting methods, and cropping algorithms were investigated and their effects were statistically analyzed. Results The compression ratios of MP4, H.264 and H.265 with both sorting methods were improved by 26% and 5%, 42% and 27%, 72% and 43%, respectively, comparing to those of M-JPEG. The slice-prioritized sorting method showed a higher compression ratio than that of the location-prioritized sorting method for MP4 (P=0.00000), H.264 (P=0.00012) and H.265 (P=0.00000), respectively. The compression ratios of H.265 were improved significantly with the applications of morphology algorithm (P=0.01890 and P=0.00530), flood-fill algorithm (P=0.00510 and P=0.00020) and level-set algorithm (P=0.02800 and P=0.00830) for both sorting methods. Among the four video encoders, H.265 showed the best compression ratio and restoration accuracy. Conclusions The compression ratio and restoration accuracy of video encoders using inter-frame coding (MP4, H.264 and H.265) were higher than that of video encoders using intra-frame coding (M-JPEG). It is feasible to implement video encoders using inter-frame coding for high-performance MRI data storage in MR-guided radiotherapy.

Project description:PurposeTo compare cone-beam computed tomography (CT) navigation vs conventional CT image guidance during biopsies.Materials and methodsPatients scheduled for image-guided biopsies were prospectively and randomly assigned to conventional CT guidance vs cone-beam CT navigation. Radiation dose, accuracy of final needle position, rate of histopathologic diagnosis, and number of needle repositions to reach the target (defined as pullback to adjust position) were compared.ResultsA total of 58 patients (mean age, 57 y; 62.1% men) were randomized: 29 patients underwent 33 biopsies with CT guidance and 29 patients with 33 lesions underwent biopsy with cone-beam CT navigation. The average body mass index (BMI) was similar between groups, at 28.8 kg/m(2) ± 6.55 (P = .18). There was no difference between groups in terms of patient and lesion characteristics (eg, size, depth). The average lesion size was 29.1 ± 12.7mm for CT group vs 32.1mm ±16.8mm for cone-beam CT group (P < 0.59). Location of lesions was equally divided between the 2 groups, 20 lung lesions, 18 renal lesions and 20 other abdominal lesions. Mean number of needle repositions in the cone-beam CT group was 0.3 ± 0.5, compared with 1.9 ± 2.3 with conventional CT (P < .001). The average skin entry dose was 29% lower with cone-beam CT than with conventional CT (P < .04 accounting for BMI). The average estimated effective dose for the planning scan from phantom data was 49% lower with cone-beam CT vs conventional CT (P = .018). Accuracy, defined as the difference between planned and final needle positions, was 4.9 mm ± 4.1 for the cone-beam CT group, compared with 12.2 mm ± 8.1 for conventional CT (P < .001). Histopathologic diagnosis rates were similar between groups, at 90.9% for conventional CT and 93.9% for cone-beam CT (P = .67).ConclusionsCone-beam CT navigation for biopsies improved targeting accuracy with fewer needle repositions, lower skin entry dose, and lower effective dose for planning scan, and a comparable histopathologic diagnosis rate.

Project description:There is significant interest in delivering precisely targeted small-volume radiation treatments, in the pre-clinical setting, to study dose-volume relationships with tumour control and normal tissue damage. For these studies it is vital that image guidance systems and target positioning are accurately aligned (IGRT), in order to deliver dose precisely and accurately according to the treatment plan. In this work we investigate the IGRT targeting accuracy of the X-RAD 225 Cx system from Precision X-Ray using high-resolution 3D dosimetry techniques. Small cylindrical PRESAGE® dosimeters were used with optical-CT readout (DMOS) to verify the accuracy of 2.5, 1.0, and 5.0 mm X-RAD cone attachments. The dosimeters were equipped with four target points, visible on both CBCT and optical-CT, at which a 7-field coplanar treatment plan was delivered with the respective cone. Targeting accuracy (distance to agreement between the target point and delivery isocenter) and cone alignment (isocenter precision under gantry rotation) were measured using the optical-CT images. Optical-CT readout of the first 2.5 mm cone dosimeter revealed a significant targeting error of 2.1 ± 0.6 mm and a cone misalignment of 1.3 ± 0.1 mm. After the IGRT hardware and software had been recalibrated, these errors were reduced to 0.5 ± 0.1 and 0.18 ± 0.04 mm respectively, within the manufacturer specified 0.5 mm. Results from the 1.0 mm cone were 0.5 ± 0.3 mm targeting accuracy and 0.4 ± 0.1 mm cone misalignment, within the 0.5 mm specification. The results from the 5.0 mm cone were 1.0 ± 0.2 mm targeting accuracy and 0.18 ± 0.06 mm cone misalignment, outside of accuracy specifications. Quality assurance of small field IGRT targeting and delivery accuracy is a challenging task. The use of a 3D dosimetry technique, where targets are visible on both CBCT and optical-CT, enabled identification and quantification of a targeting error in 3D. After correction, the targeting accuracy of the irradiator was verified to be within 0.5 mm (or 1.0 mm for the 5.0 mm cone) and the cone alignment was verified to be within 0.2 mm (or 0.4 mm for the 1.0 mm cone). The PRESAGE®/DMOS system proved valuable for end-to-end verification of small field IGRT capabilities.

Dataset Information

Image-Guided Radiotherapy Using a Modified Industrial Micro-CT for Preclinical Applications.

Purpose/objective

Methods/materials

Results

Conclusion

Publications

Image-Guided Radiotherapy Using a Modified Industrial Micro-CT for Preclinical Applications.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets