Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Dissipated power and induced velocity fields data of a micro single dielectric barrier discharge plasma actuator for active flow control.

ABSTRACT: In recent years, single dielectric barrier discharge (SDBD) plasma actuators have gained great interest among all the active flow control devices typically employed in aerospace and turbomachinery applications [1,2]. Compared with the macro SDBDs, the micro single dielectric barrier discharge (MSDBD) actuators showed a higher efficiency in conversion of input electrical power to delivered mechanical power [3,4]. This article provides data regarding the performances of a MSDBD plasma actuator [5,6]. The power dissipation values [5] and the experimental and numerical induced velocity fields [6] are provided. The present data support and enrich the research article entitled "Optimization of micro single dielectric barrier discharge plasma actuator models based on experimental velocity and body force fields" by Pescini et al. [6].

SUBMITTER: Pescini E

PROVIDER: S-EPMC4564384 | biostudies-literature | 2015 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Dissipated power and induced velocity fields data of a micro single dielectric barrier discharge plasma actuator for active flow control.

Pescini E E Martínez D S DS De Giorgi M G MG Francioso L L Ficarella A A

Data in brief 20150828

In recent years, single dielectric barrier discharge (SDBD) plasma actuators have gained great interest among all the active flow control devices typically employed in aerospace and turbomachinery applications [1,2]. Compared with the macro SDBDs, the micro single dielectric barrier discharge (MSDBD) actuators showed a higher efficiency in conversion of input electrical power to delivered mechanical power [3,4]. This article provides data regarding the performances of a MSDBD plasma actuator [5, ...[more]

PMID: 26425667

Similar Datasets

Study of an AC dielectric barrier single micro-discharge filament over a water film.

Project description:In the last decades, AC powered atmospheric dielectric barrier discharges (DBDs) in air with a liquid electrode have been proposed as a promising plasma technology with versatile applicability in medicine, agriculture and water treatment. The fundamental features of the micro-discharge filaments that make up this type of plasma have, however, not been studied yet in sufficient detail. In order to address this need, we investigated a single DBD micro-discharge filament over a water film in a sphere-to-sphere electrode configuration, by means of ICCD imaging and optical emission spectroscopy. When the water film temporarily acts as the cathode, the plasma duration is remarkably long and shows a clear similarity with a resistive barrier discharge, which we attribute to the resistive nature of the water film and the formation of a cathode fall. As another striking difference to DBD with solid electrodes, a constant glow-like plasma is observed at the water surface during the entire duration of the applied voltage cycle, indicating continuous plasma treatment of the liquid. We propose several elementary mechanisms that might underlie the observed unique behavior, based on the specific features of a water electrode.

| S-EPMC6053385 | biostudies-literature

A low power flexible dielectric barrier discharge disinfects surfaces and improves the action of hydrogen peroxide.

Project description:There is an urgent need for disinfection and sterilization devices accessible to the public that can be fulfilled by innovative strategies for using cold atmospheric pressure plasmas. Here, we demonstrate a successful novel combination of a flexible printed circuit design of a dielectric barrier discharge (flex-DBD) with an environmentally safe chemical reagent for surface decontamination from bacterial contaminants. Flex-DBD operates in ambient air, atmospheric pressure, and room temperature without any additional gas flow at a power density not exceeding 0.5 W/cm2. The flex-DBD activation of a 3% hydrogen peroxide solution results in the reduction in the bacterial load of a surface contaminant of > 6log10 in 90 s, about 3log10 and 2log10 better than hydrogen peroxide alone or the flex-DBD alone, respectively, for the same treatment time. We propose that the synergy between plasma and hydrogen peroxide is based on the combined action of plasma-generated OH· radicals in the hydrogen peroxide solution and the reactive nitrogen species supplied by the plasma effluent. A scavenger method verified a significant increase in OH· concentration due to plasma treatment. Novel in-situ FTIR absorption spectra show the presence of O3, NO2, N2O, and other nitrogen species. Ozone dissolving in the H2O2 solution can effectively generate OH· through a peroxone process. The addition of the reactive nitrogen species increases the disinfection efficiency of the hydroxyl radicals and other oxygen species. Hence, plasma activation of a low concentration hydrogen peroxide solution, using a hand-held flexible DBD device results in a dramatic improvement in disinfection.

| S-EPMC7907379 | biostudies-literature

Surface modification of ZnMgAl-coated steel by dielectric-barrier discharge plasma.

Project description:In this study, ZnMgAl alloy coated steel sheets were exposed to a dielectric-barrier discharge plasma with different gas mixtures (Ar, Ar + 5% O2, Ar + 5% H2O). Five different plasma-induced processes were identified at the surface: (i) etching of aliphatic carbon groups, (ii) conversion of absorbed carboxylates to carbonates, (iii) field-induced migration of Zn and Mg towards the surface, (iv) increased oxide layer thickness, and (v) homogenization of the surface potential of the originally very heterogeneous alloy. The relative contribution of each process depended on the specific gas mixture. Peel-test studies showed that all atmospheric-pressure plasma treatments improved the adhesive properties of the alloy coating for two different adhesives (acrylate and epoxy amine). The highest improvement was associated to the case of Ar + 5% H2O gas mixture, where all described surface processes took place to a high degree.

| S-EPMC9074232 | biostudies-literature

Facile Carbon Fixation to Performic Acids by Water-Sealed Dielectric Barrier Discharge.

Project description:Carbon fixation refers to the conversion of carbon dioxide (CO2) to organic materials, as commonly performed in nature through photosynthesis by plants and other autotrophic organisms. The creation of artificial carbon fixation processes is one of the greatest challenges for chemistry to solve the critical environmental issue concerning the reduction of CO2 emissions. We have developed an electricity-driven facile CO2 fixation process that yields performic acid, HCO2OH, from CO2 and water at neutral pH by dielectric barrier discharge with an input electric power conversion efficiency of currently 0.2-0.4%. This method offers a promising future technology for artificial carbon fixation on its own, and may also be scaled up in combination with e.g., the post-combustion CO2 capture and storage technology.

| S-EPMC4593949 | biostudies-literature

Hidden fluid mechanics: Learning velocity and pressure fields from flow visualizations.

Project description:For centuries, flow visualization has been the art of making fluid motion visible in physical and biological systems. Although such flow patterns can be, in principle, described by the Navier-Stokes equations, extracting the velocity and pressure fields directly from the images is challenging. We addressed this problem by developing hidden fluid mechanics (HFM), a physics-informed deep-learning framework capable of encoding the Navier-Stokes equations into the neural networks while being agnostic to the geometry or the initial and boundary conditions. We demonstrate HFM for several physical and biomedical problems by extracting quantitative information for which direct measurements may not be possible. HFM is robust to low resolution and substantial noise in the observation data, which is important for potential applications.

| S-EPMC7219083 | biostudies-literature

New insight into the residual inactivation of Microcystis aeruginosa by dielectric barrier discharge.

Project description:We report the new insight into the dielectric barrier discharge (DBD) induced inactivation of Microcystis aeruginosa, the dominant algae which caused harmful cyanobacterial blooms in many developing countries. In contrast with the previous work, we employed flow cytometry to examine the algal cells, so that we could assess the dead and living cells with more accuracy, and distinguish an intermediate state of algal cells which were verified as apoptotic. Our results showed that the numbers of both dead and apoptotic cells increased with DBD treatment delay time, and hydrogen peroxide produced by DBD was the main reason for the time-delayed inactivation effect. However, apart from the influence of hydrogen peroxide, the DBD-induced initial injures on the algal cells during the discharge period also played a considerable role in the inactivation of the DBD treated cells, as indicated by the measurement of intracellular reactive oxygen species (ROS) inside the algal cells. We therefore propose an effective approach to utilization of non-thermal plasma technique that makes good use of the residual inactivation effect to optimize the experimental conditions in terms of discharge time and delay time, so that more efficient treatment of cyanobacterial blooms can be achieved.

| S-EPMC4561898 | biostudies-literature

Numerical Investigations on Methane-Air Nanosecond Pulsed Dielectric Barrier Discharge Plasma-Assisted Combustion.

Project description:Plasma-assisted combustion is a promising approach to achieve fast ignition and highly efficient combustion. In this work, methane-air nanosecond pulsed dielectric barrier discharge plasma-assisted combustion is numerically investigated by combining a homemade plasma model with the combustion model of software CHEMKIN-PRO. Effects of varying applied voltage amplitudes on the characteristic parameters of the plasma-assisted planar shear flow combustion as well as the reaction pathway maps of not only the nanosecond pulsed dielectric barrier discharge plasma but also the combustions without and with plasma assistance are systematically illustrated and analyzed. The simulation results indicate that under the combined action of increasing electric field intensity and increasing charged particle densities, the peak value of the discharge current density increases, and the peak time of the discharge current density is brought forward with the increase of the applied voltage amplitude. The temperature reaches its peak value earlier in the methane-air combustion with plasma assistance than without plasma assistance. The maximum temperature reduces to around 1900 K when the applied voltage amplitude is higher than 11 kV. There are emerging pathways to generate hydrocarbons C2H4 and C2H2 in the plasma-assisted combustion, the reactions of CH4 on CH and C2H on H2, respectively. The reactions involving active species such as H play a significant role in the plasma-assisted combustion, which causes an obvious decrease in the densities of these active species with plasma assistance.

| S-EPMC7745419 | biostudies-literature

Antibiotic-Resistant and Non-Resistant Bacteria Display Similar Susceptibility to Dielectric Barrier Discharge Plasma.

Project description:Here, we examined whether antibiotic-resistant and non-resistant bacteria show a differential susceptibility to plasma treatment. Escherichia coli DH5? were transformed with pPRO-EX-HT-CAT, which encodes an ampicillin resistance gene and chloramphenicol acetyltransferase (CAT) gene, and then treated with a dielectric barrier discharge (DBD) plasma torch. Plasma treatment reduced the viable cell count of E. coli after transformation/selection and further cultured in ampicillin-containing and ampicillin-free medium. However, there was no significant difference in viable cell count between the transformed and untransformed E. coli after 1 min- and 2 min-plasma treatment. Furthermore, the enzyme-linked immunosorbent assay (ELISA) and acetyltransferase activity assay showed that the CAT activity was reduced after plasma treatment in both transformed and selected E. coli grown in ampicillin-containing or ampicillin-free medium. Loss of lipopolysaccharide and DNA damage caused by plasma treatment were confirmed by a Limulus test and polymerase chain reaction, respectively. Taken together, these findings suggest the plasma acts to degrade components of the bacteria and is therefore unlikely to display a differential affect against antibiotic-resistant and non-resistant bacteria. Therefore, the plasma method may be useful in eliminating bacteria that are recalcitrant to conventional antibiotic therapy.

| S-EPMC7504529 | biostudies-literature

Prediction of nested complementary pattern in argon dielectric-barrier discharge at atmospheric pressure.

Project description:A two-dimensional self-consistent fluid model was employed to investigate the spatiotemporal nonlinear behavior in an argon glow-like/Townsend-like dielectric-barrier discharge (DBD) at atmospheric pressure. The discharge is characterized by a major current pulse with a residual one ahead per half cycle of the external voltage. The two current pulses are operated in glow mode, but with Townsend mode between them. Contrasting spatial discharge structures are complementarily presented not only at two current pulses in the same half cycle but also during the discharge in the two adjacent-half cycles, resulting in the formation of a unique nested complementary pattern each cycle. This peculiar behavior mainly lies in the fact that sufficient charged particles are trapped in the gas gap due to the last discharge and able to dominate the subsequent discharge through the "spatial memory effect". The charge transport regime reveals that this nested complementary pattern is presented only in a limited range of driving frequency.

| S-EPMC4639832 | biostudies-other

A Novel Dielectric Barrier Discharge (DBD) Reactor with Streamer and Glow Corona Discharge for Improved Ozone Generation at Atmospheric Pressure.

Project description:Discharge mode is an important parameter for ozone synthesis by dielectric barrier discharge (DBD). Currently, it is still challenging to stably generate glow discharge with oxygen at atmospheric pressure. In this paper, a DBD reactor with a layer of silver placed between the electrode and the dielectric layer (SL-DBD) was developed. Experimental results show that both streamer and glow corona discharge were stably generated under sinusoidal excitation with a 0.5 mm discharge gap in a parallel-plate DBD, due to the increased electric field strength in the discharge gap by the silver layer. It was also found that, in the SL-DBD reactor, glow corona discharge enhances the discharge strength by 50 times. The spectral peak of O at 777 nm in SL-DBD is increased to 28,800, compared with 18,389 in a reactor with a streamer only. The SL-DBD reactor produces ozone with a concentration of as high as 150 g/m3 and shows good stability in an 8 h durability test.

| S-EPMC8623020 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data