Dataset Information

Subperiosteal transmission of intra-articular pressure between articulated and stationary joints.

ABSTRACT: Hydrostatic pressures can be transmitted between synovial capsules. In each of ten rabbits, we simultaneously measured pressure in two joints, one of which was passively ranged, and the other of which was kept stationary. The intra-articular pressure inside the stationary joint changed every time its companion joint was ranged. But the pressure in the stationary joint did not change when the periosteum was transected above the ranged joint. This phenomenon was observed in all four animals that served as their own controls. The study suggests that the intra-articular pressure was transmitted through the space between the periosteum and the bone surface. Alternative explanations, like measurements of venous blood pressure, did not show correlation with hydrostatic pressure changes in the joints. The Floating Skeleton concept suggests a biomechanical rationale for this newly observed phenomenon: that there exists a subperiosteal hydrostatic connection of synovial joints, and that this "net" distributes excess pressures among joints through the periosteal sheath to sustain the integrity of the joint contacting surfaces over a lifetime.

SUBMITTER: Pitkin M

PROVIDER: S-EPMC4648441 | biostudies-literature | 2015 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Subperiosteal transmission of intra-articular pressure between articulated and stationary joints.

Pitkin Mark M Muppavarapu Raghuveer R Cassidy Charles C Pitkin Emil E

Scientific reports 20150129

Hydrostatic pressures can be transmitted between synovial capsules. In each of ten rabbits, we simultaneously measured pressure in two joints, one of which was passively ranged, and the other of which was kept stationary. The intra-articular pressure inside the stationary joint changed every time its companion joint was ranged. But the pressure in the stationary joint did not change when the periosteum was transected above the ranged joint. This phenomenon was observed in all four animals that s ...[more]

PMID: 25632015

Similar Datasets

Project description:Most forms of arthritis are incurable, difficult to treat, and a major cause of disability in Western countries. Better local treatment of arthritis is impaired by the pharmacokinetics of the joint that make it very difficult to deliver drugs to joints at sustained, therapeutic concentrations. This is especially true of biologic drugs, such as proteins and RNA, many of which show great promise in preclinical studies. Gene transfer provides a strategy for overcoming this limitation. The basic concept is to deliver cDNAs encoding therapeutic products by direct intra-articular injection, leading to sustained, endogenous synthesis of the gene products within the joint. Proof of concept has been achieved for both in vivo and ex vivo gene delivery using a variety of vectors, genes, and cells in several different animal models. There have been a small number of clinical trials for rheumatoid arthritis (RA) and osteoarthritis (OA) using retrovirus vectors for ex vivo gene delivery and adeno-associated virus (AAV) for in vivo delivery. AAV is of particular interest because, unlike other viral vectors, it is able to penetrate deep within articular cartilage and transduce chondrocytes in situ. This property is of particular importance in OA, where changes in chondrocyte metabolism are thought to be fundamental to the pathophysiology of the disease. Authorities in Korea have recently approved the world's first arthritis gene therapy. This targets OA by the injection of allogeneic chondrocytes that have been transduced with a retrovirus carrying transforming growth factor-?1 cDNA. Phase III studies are scheduled to start in the United States soon. Meanwhile, two additional Phase I trials are listed on Clinicaltrials.gov , both using AAV. One targets RA by transferring interferon-?, and the other targets OA by transferring interleukin-1 receptor antagonist. The field is thus gaining momentum and promises to improve the treatment of these common and debilitating diseases.

Project description:IntroductionIn the equine racehorse industry, reduced athletic performance due to joint injury and lameness has been extensively reviewed. Intra-articular injections of glucocorticoids are routinely used to relieve pain and inflammation associated with osteoarthritis. Intra-articular injections of pharmaceutical agents require practice for precise needle placement and to minimize complications. Training on simulators or models is a viable alternative for developing these technical skills. The purpose of this study was to compare the qualitative ultrasonographic characteristics of three-dimensional (3D) printed models of equine cervical articular process joints to that of a dissected equine cervical spine (gold standard).MethodsA randomized complete block design study was conducted in which a total of thirteen cervical articular process joint models were printed using several materials, printers, and printing technologies. Ultrasound video clips with the models immersed in water were recorded. Two board certified veterinary radiologists and three veterinary radiology residents reviewed the videos and responded to a survey assessing and comparing the ultrasonographic characteristics of the 3D printed models to those of the gold standard.ResultsSix 3D printed models had ultrasonographic characteristics similar to the gold standard. These six models were (material, printer, printing technology): nylon PA 12, EOS Formiga P100, selective laser sintering (P = 0.99); Onyx nylon with chopped carbon fiber, Markforged Onyx Two, fused deposition modeling (P = 0.48); polycarbonate, Ultimaker 3, fused deposition modeling (P = 0.28); gypsum, ProJet CJP 660 Pro, ColorJet Printing (P = 0.28); polylactic acid, Prusa I3, fused deposition modeling (P = 0.23); and high temperature V1 resin, Form 2, stereolithography (P = 0.22).ConclusionWhen assessed in water, it is possible to replicate the qualitative ultrasonographic characteristics of bone using three dimensional printed models made by combining different materials, printing technologies, and printers. However, not all models share similar qualitative ultrasonographic characteristics with bone. We suggest that the aforementioned six models be used as proxy for simulating bones or joints for use with ultrasound. In order to replicate the resistance and acoustic window provided by soft tissues, further work testing the ability of these models to withstand embedding in material such as ballistic gelatin is required.

Project description:ObjectiveTo determine the synovial fluid (SF) concentrations of lidocaine and mepivacaine after intra-articular injection with clinically relevant doses to the distal interphalangeal (DIP), metacarpophalangeal (MCP), middle carpal (MC), and tarsocrural (TC) joint at two different time points after injection in order to be able to compare concentrations with previously established concentrations associated with cytotoxicity and antimicrobial activity.ProceduresIn the first of two experiments, 20 joints (5 MC, 5 MCP, 10 DIP joints) of five horses under general anesthesia were injected with clinically referenced doses of 2% lidocaine. Simultaneously, the horses had 19 joints (5 MC, 5 MCP, 9 DIP joints) injected with clinically referenced doses of 2% mepivacaine. Synovial fluid samples were collected ~7 min after injection. In experiment 2, 23 joints of seven horses under standing sedation were injected with clinically referenced doses of 2% lidocaine. Similarly, the horses had 21 joints injected with 2% mepivacaine. Synovial fluid samples were collected ~23 min after injection. The concentration of mepivacaine and lidocaine in the obtained SF samples was assessed using high-performance-liquid-chromatography with mass spectrometry detection (HPLC MS).ResultsSynovial fluid was obtained 6.8 ± 1.5 (experiment 1) and 23 ± 4.3 (experiment 2) min following intra-articular injection of mepivacaine and lidocaine. Synovial fluid concentrations of experiment 1 for lidocaine and mepivaciane were 6.46-19.62 mg/mL (mean 11.96 ± SD 3.89 mg/mL) and 5.01-13.38 mg/mL (mean 8.18 ± SD 1.76 mg/mL), respectively. In experiment 2, concentrations were 2.94-10.40 mg/mL (mean 6.31± SD 2.23 mg/mL) for lidocaine and 2.10-8.70 mg/mL (mean 4.97 ± SD 1.77 mg/mL) for mepivacaine.Conclusions and clinical relevanceIntra-articular LA injections in horses resulted in SF concentrations above those previously associated with cytotoxic effects in vitro but also above those associated with beneficial antimicrobial activities. Local anesthetic concentration was 33-60% lower after 23 min (experiment 2) than after 7 min (experiment 1).

Project description:The basic biology of healing between a tendon graft and bone tunnel remains incompletely understood. Distinct variability in the morphological characteristics of the healing tendon-bone attachment site has been reported. We hypothesized that spatial and temporal differences in tendon-to-bone healing exist at different regions of a surgically created bone tunnel. Twenty-four male, Sprague-Dawley rats underwent anterior cruciate ligament (ACL) reconstruction in the left knee using a flexor digitorum longus tendon graft secured using suspensory periosteal fixation. Animals were sacrificed at 4, 7, 11, 14, 21, and 28 days after surgery and prepared for routine histology and immunohistochemical analysis of the healing enthesis at the intra-articular aperture (IAA), mid-tunnel, and extra-articular aperture (EAA). Six animals were used to measure mineral apposition rate (MAR) along the healing bone tunnel by double fluorochrome labeling at 14 and 28 days after surgery. The total area of calcified bone matrix was assessed with von Kossa staining and Goldner-Masson trichrome staining, respectively. The healing tendon-bone interface tissue exhibited a wide chondroid matrix at the IAA, in contrast to a narrow, fibrous matrix at the EAA. There were significantly more osteoclasts at the IAA compared to EAA throughout the study period, except 4 days after surgery (p < 0.05). Collagen continuity between the tendon graft and bone tunnel increased over time, with a more parallel orientation and increased collagen fiber continuity between tendon and bone at the EAA compared to the IAA. MAR was also significantly greater at the EAA at 4 weeks (p < 0.001). Significant differences in healing between the tendon graft and bone exist along the length of bone tunnel secured with suspensory fixation. The etiology of these differences is likely multifactorial in nature, including variable biological and biomechanical environments at different ends of the tunnel. Understanding these differences may ultimately allow surgeons to improve the quality of graft fixation and long-term outcomes after ACL reconstruction.

Dataset Information

Subperiosteal transmission of intra-articular pressure between articulated and stationary joints.

Publications

Subperiosteal transmission of intra-articular pressure between articulated and stationary joints.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets