Browse
Submit Data
Databases
API
Help

Dataset Information

31 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Conductive Graphitic Carbon Nitride as an Ideal Material for Electrocatalytically Switchable CO2 Capture.

ABSTRACT: Good electrical conductivity and high electron mobility of the sorbent materials are prerequisite for electrocatalytically switchable CO2 capture. However, no conductive and easily synthetic sorbent materials are available until now. Here, we examined the possibility of conductive graphitic carbon nitride (g-C4N3) nanosheets as sorbent materials for electrocatalytically switchable CO2 capture. Using first-principle calculations, we found that the adsorption energy of CO2 molecules on g-C4N3 nanosheets can be dramatically enhanced by injecting extra electrons into the adsorbent. At saturation CO2 capture coverage, the negatively charged g-C4N3 nanosheets achieve CO2 capture capacities up to 73.9 × 10(13) cm(-2) or 42.3 wt%. In contrast to other CO2 capture approaches, the process of CO2 capture/release occurs spontaneously without any energy barriers once extra electrons are introduced or removed, and these processes can be simply controlled and reversed by switching on/off the charging voltage. In addition, these negatively charged g-C4N3 nanosheets are highly selective for separating CO2 from mixtures with CH4, H2 and/or N2. These predictions may prove to be instrumental in searching for a new class of experimentally feasible high-capacity CO2 capture materials with ideal thermodynamics and reversibility.

SUBMITTER: Tan X

PROVIDER: S-EPMC4664948 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Biopolymer-activated graphitic carbon nitride towards a sustainable photocathode material.

Project description:Photoelectrochemical (PEC) conversion of solar light into chemical fuels is one of the most promising solutions to the challenge of sustainable energy. Graphitic carbon (IV) nitride polymer (g-CN) is an interesting sustainable photocathode material due to low-cost, visible-light sensitivity, and chemical stability up to 500 °C in air. However, grain boundary effects and limited active sites greatly hamper g-CN activity. Here, we demonstrate biopolymer-activation of g-CN through simultaneous soft-templating of a sponge-like structure and incorporation of active carbon-dopant sites. This facile approach results in an almost 300% increase in the cathodic PEC activity of g-CN under simulated solar-irradiation.

| S-EPMC3703604 | biostudies-literature

Graphitic Carbon Nitride with Dopant Induced Charge Localization for Enhanced Photoreduction of CO2 to CH4.

Project description:The photoreduction of CO2 to hydrocarbon products has attracted much attention because it provides an avenue to directly synthesize value-added carbon-based fuels and feedstocks using solar energy. Among various photocatalysts, graphitic carbon nitride (g-C3N4) has emerged as an attractive metal-free visible-light photocatalyst due to its advantages of earth-abundance, nontoxicity, and stability. Unfortunately, its photocatalytic efficiency is seriously limited by charge carriers' ready recombination and their low reaction dynamics. Modifying the local electronic structure of g-C3N4 is predicted to be an efficient way to improve the charge transfer and reaction efficiency. Here, boron (B) is doped into the large cavity between adjacent tri-s-triazine units via coordination with two-coordinated N atoms. Theoretical calculations prove that the new electron excitation from N (2p x , 2p y ) to B (2p x , 2p y ) with the same orbital direction in B-doped g-C3N4 is much easier than N (2p x , 2p y ) to C 2p z in pure g-C3N4, and improves the charge transfer and localization, and thus the reaction dynamics. Moreover, B atoms doping changes the adsorption of CO (intermediate), and can act as active sites for CH4 production. As a result, the optimal sample of 1%B/g-C3N4 exhibits better selectivity for CH4 with ?32 times higher yield than that of pure g-C3N4.

| S-EPMC6755511 | biostudies-literature

Mechanical, Structural and Electronic Properties of CO2 Adsorbed Graphitic Carbon Nitride (g-C3N4) under Biaxial Tensile Strain.

Project description:We investigate mechanical, structural and electronic properties of CO2 adsorbed graphitic carbon nitride (g-C3N4) system under biaxial tensile strain via first-principles calculations. The results show that the stress of CO2 adsorbed g-C3N4 system increases and then decreases linearly with the increasing biaxial strain, reaching maximum at 0.12 strain. This is primarily caused by the plane N-C stretching of the g-C3N4. Furthermore, both the Perdew-Burke-Ernzerhof (PBE) and Heyd- Scuseria-Ernzerhof screened hybrid functional (HSE06) band gaps show direct-indirect transitions under biaxial tensile strain and have the maximum also at 0.12 strain. It is found that there is large dipole transition matrix element around Γ point, leading high optical absorption coefficients of the deformed adsorption system, which would be of great use for the applications of new elastic nanoelectronic and optoelectronic devices.

| S-EPMC8347895 | biostudies-literature

Graphitic Carbon Nitride Doped Copper-Manganese Alloy as High-Performance Electrode Material in Supercapacitor for Energy Storage.

Project description:Here, we report the synthesis of copper-manganese alloy (CuMnO2) using graphitic carbon nitride (gCN) as a novel support material. The successful formation of CuMnO2-gCN was confirmed through spectroscopic, optical, and other characterization techniques. We have applied this catalyst as the energy storage material in the alkaline media and it has shown good catalytic behavior in supercapacitor applications. The CuMnO2-gCN demonstrates outstanding electrocapacitive performance, having high capacitance (817.85 A·g-1) and well-cycling stability (1000 cycles) when used as a working electrode material for supercapacitor applications. For comparison, we have also used the gCN and Cu2O-gCN for supercapacitor applications. This study proposes a simple path for the extensive construction of self-attaining double metal alloy with control size and uniformity in high-performance energy-storing materials.

| S-EPMC7023178 | biostudies-literature

Modification of Graphitic Carbon Nitride with Hydrogen Peroxide.

Project description:Graphitic carbon nitride (GCN) was synthetized by heating melamine and then it was thermally exfoliated for 1-3 h in air. Both bulk and exfoliated GCN nanomaterials were treated in the 10-30% aqueous solutions of H2O2 for us to study their modification. The light absorption properties were observed by the reddish color and the red-shifts of their UV-Vis spectra. The content of oxygen increased and hydrogen peroxide was supposed to partially oxidize C-OH groups to C=O ones and to form C-O-C groups instead of edge C-NH-C ones. The GCN structure changes were not observed. However, a surface modification of the GCN materials was recognized by their changed photocatalytic activities tested by means of Acid Orange 7 (AO7) and Rhodamines B (RhB), zeta-potentials, and neutralization titration curves.

| S-EPMC7559342 | biostudies-literature

Nitrogen-doped Carbon Nanospheres-Modified Graphitic Carbon Nitride with Outstanding Photocatalytic Activity.

Project description:Metals and metal oxides are widely used as photo/electro-catalysts for environmental remediation. However, there are many issues related to these metal-based catalysts for practical applications, such as high cost and detrimental environmental impact due to metal leaching. Carbon-based catalysts have the potential to overcome these limitations. In this study, monodisperse nitrogen-doped carbon nanospheres (NCs) were synthesized and loaded onto graphitic carbon nitride (g-C3N4, GCN) via a facile hydrothermal method for photocatalytic removal of sulfachloropyridazine (SCP). The prepared metal-free GCN-NC exhibited remarkably enhanced efficiency in SCP degradation. The nitrogen content in NC critically influences the physicochemical properties and performances of the resultant hybrids. The optimum nitrogen doping concentration was identified at 6.0 wt%. The SCP removal rates can be improved by a factor of 4.7 and 3.2, under UV and visible lights, by the GCN-NC composite due to the enhanced charge mobility and visible light harvesting. The mechanism of the improved photocatalytic performance and band structure alternation were further investigated by density functional theory (DFT) calculations. The DFT results confirm the high capability of the GCN-NC hybrids to activate the electron-hole pairs by reducing the band gap energy and efficiently separating electron/hole pairs. Superoxide and hydroxyl radicals are subsequently produced, leading to the efficient SCP removal.

| S-EPMC7770884 | biostudies-literature

Unzipping of Single-Walled Carbon Nanotube for the Development of Electrocatalytically Active Hybrid Catalyst of Graphitic Carbon and Pd Nanoparticles.

Project description:We demonstrate a new approach for the unzipping of single-walled carbon nanotube (SWCNT) in an aqueous solution using the transition metal complex PdCl4 2- as a sacrificial chemical scissor and the growth of graphitic-carbon-coated Pd nanoparticles for the electrocatalytic oxidation of formic acid. The chemical unzipping and the growth of Pd nanoparticles involve the spontaneous electron transfer between SWCNT and the metal complex in an aqueous solution at room temperature. The redox potential for SWCNT and PdCl4 2- favors the spontaneous electron transfer reaction. The metal complex, in situ generated Pd nanoparticle, and oxygen play vital role in the oxidative unzipping of SWCNT. The Pd nanoparticles have an average size of 11 nm and are coated with the graphitic carbon layer of unzipped SWCNT (UzCNT-Pd). The Pd nanoparticle of the UzCNT-Pd hybrid material has a large electrochemically active surface area of 2.14 cm2. The hybrid material exhibits excellent electrocatalytic activity toward the oxidation of formic acid. The area and mass specific activity are significantly higher than those of the traditional carbon-supported Pd nanoparticle. The synergistic effect of graphitic carbon and the metal nanoparticles controls the catalytic activity. The confinement of Pd particles inside the graphitic carbon enhances the overall performance of the catalyst.

| S-EPMC6641440 | biostudies-literature

Room temperature synthesis of biodiesel using sulfonated graphitic carbon nitride.

Project description:Sulfonation of graphitic carbon nitride (g-CN) affords a polar and strongly acidic catalyst, Sg-CN, which displays unprecedented reactivity and selectivity in biodiesel synthesis and esterification reactions at room temperature.

| S-EPMC5172360 | biostudies-literature

s-Heptazine oligomers: promising structural models for graphitic carbon nitride.

Project description:Graphitic carbon nitride (g-CN) has interesting catalytic properties but is difficult to study due to its structure and how it is produced. In this study, linear s-heptazine oligomers were synthesized to serve as well-defined molecular models for g-CN. Cyclic voltammetry, absorption and emission spectroscopies showed a clear shift of properties towards those of g-CN as the number of heptazine units increased. DFT calculations supported the characterizations, and helped refine the properties observed.

| S-EPMC5954616 | biostudies-literature

The role of guanidine hydrochloride in graphitic carbon nitride synthesis.

Project description:Graphitic carbon nitride (CN) was synthesized from guanidine hydrochloride (G), melamine (M) and dicyandiamide (DCDA). The CN materials synthetized from the pure precursors and their mixtures were characterized by common methods, including thermal analysis, and their photocatalytic activities were tested by the degradation of selected organic pollutants, such as amoxicillin, phenol, Rhodamine B (RhB). Remarkable changes in their texture properties in terms of particle sizes, specific surface areas (SSA) and consequently their photocatalytic activity were explained by the role of guanidine hydrochloride in their synthesis. The SSA increased due to the release of NH3 and HCl and its complex reactions with melamine and DCDA forming structure imperfections and disruptions. The photocatalytic activity of the CN materials was found to be dependent on their SSA.

| S-EPMC8566454 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data