Dataset Information

Exposure and emissions monitoring during carbon nanofiber production--Part I: elemental carbon and iron-soot aerosols.

ABSTRACT: Production of carbon nanofibers and nanotubes (CNFs/CNTs) and their composite products is increasing globally. High volume production may increase the exposure risks for workers who handle these materials. Though health effects data for CNFs/CNTs are limited, some studies raise serious health concerns. Given the uncertainty about their potential hazards, there is an immediate need for toxicity data and field studies to assess exposure to CNFs/CNTs. An extensive study was conducted at a facility that manufactures and processes CNFs. Filter, sorbent, cascade impactor, bulk, and microscopy samples, combined with direct-reading instruments, provided complementary information on air contaminants. Samples were analyzed for organic carbon (OC) and elemental carbon (EC), metals, and polycyclic aromatic hydrocarbons (PAHs), with EC as a measure of CNFs. Transmission electron microscopy with energy-dispersive X-ray spectroscopy also was applied. Fine/ultrafine iron-rich soot, PAHs, and carbon monoxide were production byproducts. Direct-reading instrument results were reported previously [Evans DE et al. (Aerosol monitoring during carbon nanofiber production: mobile direct-reading sampling. Ann Occup Hyg 2010;54:514-31.)] Results for time-integrated samples are reported as companion papers in this Issue. OC and EC, metals, and microscopy results are reported here, in Part I, while results for PAHs are reported in Part II [Birch ME. (Exposure and Emissions Monitoring during Carbon Nanofiber Production-Part II: Polycyclic Aromatic Hydrocarbons. Ann. Occup. Hyg 2011; 55: 1037-47.)]. Respirable EC area concentrations inside the facility were about 6-68 times higher than outdoors, while personal breathing zone samples were up to 170 times higher.

SUBMITTER: Birch ME

PROVIDER: S-EPMC4689224 | biostudies-literature | 2011 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Exposure and emissions monitoring during carbon nanofiber production--Part I: elemental carbon and iron-soot aerosols.

Birch M Eileen ME Ku Bon-Ki BK Evans Douglas E DE Ruda-Eberenz Toni A TA

The Annals of occupational hygiene 20110928 9

Production of carbon nanofibers and nanotubes (CNFs/CNTs) and their composite products is increasing globally. High volume production may increase the exposure risks for workers who handle these materials. Though health effects data for CNFs/CNTs are limited, some studies raise serious health concerns. Given the uncertainty about their potential hazards, there is an immediate need for toxicity data and field studies to assess exposure to CNFs/CNTs. An extensive study was conducted at a facility ...[more]

PMID: 21965464

Similar Datasets

Project description:Exposure to vehicular emissions has been linked to numerous adverse health effects. In response to the arising concerns, near-road monitoring is conducted to better characterize the impact of mobile source emissions on air quality and exposure in the near-road environment. An intensive measurement campaign measured traffic-related air pollutants (TRAPs) and related data (e.g., meteorology, traffic, regional air pollutant levels) in Atlanta, along one of the busiest highway corridors in the US. Given the complexity of the near-road environment, the study aimed to compare two near-road monitors, located in close proximity to each other, to assess how observed similarities and differences between measurements at these two sites inform the siting of other near-road monitoring stations. TRAP measurements, including carbon monoxide (CO) and nitrogen dioxide (NO2), are analyzed at two roadside monitors in Atlanta, GA located within 325m of each other. Both meteorological and traffic conditions were monitored to assess the temporal impact of these factors on traffic-related pollutant concentrations. The meteorological factors drove the diurnal variability of primary pollutant concentration more than traffic count. In spite of their proximity, while the CO and NO2 concentrations were correlated with similar diurnal variations, pollutant concentrations at the two closely sited monitors differed, likely due to the differences in the siting characteristics reducing the dispersion of the primary emissions out of the near-road environment. Overall, the near-road TRAP concentrations at all sites were not as elevated as seen in prior studies, supporting that decreased vehicle emissions have led to significant reductions in TRAP levels, even along major interstates. Further, the differences in the observed levels show that use of single near-road observations will not capture pollutant levels representative of the local near-road environment and that additional approaches (e.g., air quality models) are needed to characterize exposures.

Dataset Information

Exposure and emissions monitoring during carbon nanofiber production--Part I: elemental carbon and iron-soot aerosols.

Publications

Exposure and emissions monitoring during carbon nanofiber production--Part I: elemental carbon and iron-soot aerosols.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets