Interfacial nano-biosensing in microfluidic droplets for high-sensitivity detection of low-solubility molecules.
Ontology highlight
ABSTRACT:
SUBMITTER: Dou M
PROVIDER: S-EPMC4760840 | biostudies-literature | 2016 Feb
REPOSITORIES: biostudies-literature
Publications
Interfacial nano-biosensing in microfluidic droplets for high-sensitivity detection of low-solubility molecules.
Dou Maowei M García José Mireles JM Zhan Sihui S Li XiuJun X
Chemical communications (Cambridge, England) 20160113 17
Taking advantage of the properties of the high surface-area-to-volume ratio of microfluidic droplets, we developed an innovative interfacial nanosensing strategy based on aptamer-functionalized graphene oxide nanosensors in microfluidic droplets for the high-sensitivity one-step detection of 17β-estradiol and other low-solubility molecules, with the detection sensitivity improved by about 3 orders of magnitude compared to conventional systems. ...[more]
Similar Datasets
Project description:The natural bacterial diversity is regarded as a treasure trove for natural products. However, accessing complex cell mixtures derived from environmental samples in standardized high-throughput screenings is challenging. Here, we present a droplet-based microfluidic platform for ultrahigh-throughput screenings able to directly harness the diversity of entire microbial communities. This platform combines extensive cultivation protocols in aqueous droplets starting from single cells or spores with modular detection methods for produced antimicrobial compounds. After long-term incubation for bacterial cell propagation and metabolite production, we implemented a setup for mass spectrometric analysis relying on direct electrospray ionization and injection of single droplets. Even in the presence of dense biomass we show robust detection of streptomycin on the single droplet level. Furthermore, we developed an ultrahigh-throughput screening based on a functional whole-cell assay by picoinjecting reporter cells into droplets. Depending on the survival of reporter cells, droplets were selected for the isolation of producing bacteria, which we demonstrated for a microbial soil community. The established ultrahigh-throughput screening for producers of antibiotics in miniaturized bioreactors in which diverse cell mixtures can be screened on the single cell level is a promising approach to find novel antimicrobial scaffolds.
| S-EPMC6117260 | biostudies-literature
Project description:As a candidate for a rapid detection of biomaterials, terahertz (THz) spectroscopy system can be considered with some advantage in non-destructive, label-free, and non-contact manner. Because protein-ligand binding energy is in the THz range, especially, most important conformational information in molecular interactions can be captured by THz electromagnetic wave. Based on the THz time-domain spectroscopy system, THz nano-metamaterial sensing chips were prepared for great enhancing of detection sensitivity. A metamaterial sensing chip was designed for increasing of absorption cross section of the target sample, related to the transmitted THz near field enhancement via the composition of metamaterial. The measured THz optical properties were then analyzed in terms of refractive index and absorption coefficient, and compared with simulation results. Also, virus quantification regarding various concentrations of the viruses was performed, showing a clear linearity. The proposed sensitive and selective THz detection method can provide abundant information of detected biomaterials to help deep understanding of fundamental optical characteristics of them, suggesting rapid diagnosis way especially useful for such dangerous and time-sensitive target biomaterials.
| S-EPMC5557762 | biostudies-literature
Project description:Microfluidic droplet generation affords precise, low volume, high throughput opportunities for molecular diagnostics. Isothermal DNA amplification with bioluminescent detection is a fast, low-cost, highly specific molecular diagnostic technique that is triggerable by temperature. Combining loop-mediated isothermal nucleic acid amplification (LAMP) and bioluminescent assay in real time (BART), with droplet microfluidics, should enable high-throughput, low copy, sequence-specific DNA detection by simple light emission. Stable, uniform LAMP-BART droplets are generated with low cost equipment. The composition and scale of these droplets are controllable and the bioluminescent output during DNA amplification can be imaged and quantified. Furthermore these droplets are readily incorporated into encapsulated droplet interface bilayers (eDIBs), or artificial cells, and the bioluminescence tracked in real time for accurate quantification off chip. Microfluidic LAMP-BART droplets with high stability and uniformity of scale coupled with high throughput and low cost generation are suited to digital DNA quantification at low template concentrations and volumes, where multiple measurement partitions are required. The triggerable reaction in the core of eDIBs can be used to study the interrelationship of the droplets with the environment and also used for more complex chemical processing via a self-contained network of droplets, paving the way for smart soft-matter diagnostics.
| S-EPMC7736893 | biostudies-literature
Project description:Droplets microfluidics is broadening the range of Lab on a Chip solutions that, however, still suffer from the lack of an adequate level of integration of optical detection and sensors. In fact, droplets are currently monitored by imaging techniques, mostly limited by a time-consuming data post-processing and big data storage. This work aims to overcome this weakness, presenting a fully integrated opto-microfluidic platform able to detect, label and characterize droplets without the need for imaging techniques. It consists of optical waveguides arranged in a Mach Zehnder's configuration and a microfluidic circuit both coupled in the same substrate. As a proof of concept, the work demonstrates the performances of this opto-microfluidic platform in performing a complete and simultaneous sequence labelling and identification of each single droplet, in terms of its optical properties, as well as velocity and lengths. Since the sensor is realized in lithium niobate crystals, which is also highly resistant to chemical attack and biocompatible, the future addition of multifunctional stages into the same substrate can be easily envisioned, extending the range of applicability of the final device.
| S-EPMC8429775 | biostudies-literature
Project description:We describe a microfluidic immunoassay device that permits sensitive and quantitative multiplexed protein measurements on nano-liter-scale samples. The device exploits the combined power of integrated microfluidics and optically encoded microspheres to create an array of approximately 100-microm(2) sensors functionalized with capture antibodies directed against distinct targets. This strategy overcomes the need for performing biochemical coupling of affinity reagents to the device substrate, permits multiple proteins to be detected in a nano-liter-scale sample, is scalable to large numbers of samples, and has the required sensitivity to measure the abundance of proteins derived from single mammalian cells. The sensitivity of the device is sufficient to detect 1000 copies of tumor necrosis factor (TNF) in a volume of 4.7nl.
| S-EPMC2678059 | biostudies-literature
Project description:A novel microfluidic calorimeter that measures the enthalpy change of reactions occurring in 100 ?m diameter aqueous droplets in fluoropolymer oil has been developed. The aqueous reactants flow into a microfluidic droplet generation chip in separate fluidic channels, limiting contact between the streams until immediately before they form the droplet. The diffusion-driven mixing of reactants is predominantly restricted to within the droplet. The temperature change in droplets due to the heat of reaction is measured optically by recording the reflectance spectra of encapsulated thermochromic liquid crystals (TLC) that are added to one of the reactant streams. As the droplets travel through the channel, the spectral characteristics of the TLC represent the internal temperature, allowing optical measurement with a precision of ?6 mK. The microfluidic chip and all fluids are temperature controlled, and the reaction heat within droplets raises their temperature until thermal diffusion dissipates the heat into the surrounding oil and chip walls. Position resolved optical temperature measurement of the droplets allows calculation of the heat of reaction by analyzing the droplet temperature profile over time. Channel dimensions, droplet generation rate, droplet size, reactant stream flows and oil flow rate are carefully balanced to provide rapid diffusional mixing of reactants compared to thermal diffusion, while avoiding thermal "quenching" due to contact between the droplets and the chip walls. Compared to conventional microcalorimetry, which has been used in this work to provide reference measurements, this new continuous flow droplet calorimeter has the potential to perform titrations ?1000-fold faster while using ?400-fold less reactants per titration.
| S-EPMC5999407 | biostudies-literature
Project description:We report single drop electroanalytical measurements of pharmaceutically and biologically relevant compounds using screen printed electrodes (SPEs) modified with carboxylated multiwalled carbon nanotubes (MWCNT-COOH) as the sensor surface. Acetaminophen, nicotine, ascorbic acid, and nicotinamide adenine dinucleotide reduced form (NADH) were detected in a single drop of solution. We show that combined polar and nonpolar interactions of analytes with -COOH functional groups and large surface area of MWCNT, respectively, allow highly sensitive analyte detection with wide dynamic range. Smaller analytes can bind to a significantly greater number of sensor sites than the bulkier analytes and offer better detection sensitivity. Results suggest that sensitivity is controlled by predominant nonpolar interactions that an analyte can undergo with the MWCNT-COOH SPE sensor surface, whereas limit of detection is controlled by the extent of polar interactions between an analyte and the sensor surface, facilitating interfacial charge transport and an electrochemical signal output. Furthermore, a combination of polar and nonpolar analyte interactions with the sensor surface shows a synergistic effect on sensitivity and detection limit. This could be a likely reason for why sensitivity does not need to always correlate with lower detection limits as variations in the interfacial interactions are critical. Application of the designed single drop method to real samples was validated by estimating the amounts of acetaminophen, nicotine, ascorbic acid, and NADH in commercially available pharmaceuticals with excellent recovery.
| S-EPMC5175583 | biostudies-literature
Project description:The available active surface area and the density of probes immobilized on this surface are responsible for achieving high specificity and sensitivity in electrochemical biosensors that detect biologically relevant molecules, including DNA. Here, we report the design of gold-coated, silicon micropillar-structured electrodes functionalized with modified poly-l-lysine (PLL) as an adhesion layer to concomitantly assess the increase in sensitivity with the increase of the electrochemical area and control over the probe density. By systematically reducing the center-to-center distance between the pillars (pitch), denser micropillar arrays were formed at the electrode, resulting in a larger sensing area. Azido-modified peptide nucleic acid (PNA) probes were click-reacted onto the electrode interface, exploiting PLL with appended oligo(ethylene glycol) (OEG) and dibenzocyclooctyne (DBCO) moieties (PLL-OEG-DBCO) for antifouling and probe binding properties, respectively. The selective electrochemical sandwich assay formation, composed of consecutive hybridization steps of the target complementary DNA (cDNA) and reporter DNA modified with the electroactive ferrocene functionality (rDNA-Fc), was monitored by quartz crystal microbalance. The DNA detection performance of micropillared electrodes with different pitches was evaluated by quantifying the cyclic voltammetric response of the surface-confined rDNA-Fc. By decrease of the pitch of the pillar array, the area of the electrode was enhanced by up to a factor 10.6. A comparison of the electrochemical data with the geometrical area of the pillared electrodes confirmed the validity of the increased sensitivity of the DNA detection by the design of the micropillar array.
| S-EPMC7191753 | biostudies-literature
Project description:Lipid droplets play a central role in energy storage and metabolism on a cellular scale. Their core is comprised of hydrophobic lipids covered by a surface region consisting of amphiphilic lipids and proteins. For example, high and low density lipoproteins (HDL and LDL, respectively) are essentially lipid droplets surrounded by specific proteins, their main function being to transport cholesterol. Interfacial tension and surface pressure of these particles are of great interest because they are related to the shape and the stability of the droplets and to protein adsorption at the interface. Here we use coarse-grained molecular-dynamics simulations to consider a number of related issues by calculating the interfacial tension in protein-free lipid droplets, and in HDL and LDL particles mimicking physiological conditions. First, our results suggest that the curvature dependence of interfacial tension becomes significant for particles with a radius of ?5 nm, when the area per molecule in the surface region is <1.4 nm(2). Further, interfacial tensions in the used HDL and LDL models are essentially unaffected by single apo-proteins at the surface. Finally, interfacial tensions of lipoproteins are higher than in thermodynamically stable droplets, suggesting that HDL and LDL are kinetically trapped into a metastable state.
| S-EPMC3446698 | biostudies-literature
Project description:Liquid emulsion droplet evaporation is of importance for various sensing and imaging applications. The liquid-to-gas phase transformation is typically triggered thermally or acoustically by low-boiling point liquids, or by inclusion of solid structures that pin the vapor/liquid contact line to facilitate heterogeneous nucleation. However, these approaches lack precise tunability in vaporization behavior. Here, we describe a previously unused approach to control vaporization behavior through an endoskeleton that can melt and blend into the liquid core to either enhance or disrupt cohesive intermolecular forces. This effect is demonstrated using perfluoropentane (C5F12) droplets encapsulating a fluorocarbon (FC) or hydrocarbon (HC) endoskeleton. FC skeletons inhibit vaporization, whereas HC skeletons trigger vaporization near the rotator melting transition. Our findings highlight the importance of skeletal interfacial mixing for initiating droplet vaporization. Tuning molecular interactions between the endoskeleton and droplet phase is generalizable for achieving emulsion or other secondary phase transitions, in emulsions.
| S-EPMC7124936 | biostudies-literature