Browse
Submit Data
Databases
API
Help

Dataset Information

46 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

High rate lithium-sulfur battery enabled by sandwiched single ion conducting polymer electrolyte.

ABSTRACT: Lithium-sulfur batteries are highly promising for electric energy storage with high energy density, abundant resources and low cost. However, the battery technologies have often suffered from a short cycle life and poor rate stability arising from the well-known "polysulfide shuttle" effect. Here, we report a novel cell design by sandwiching a sp(3) boron based single ion conducting polymer electrolyte film between two carbon films to fabricate a composite separator for lithium-sulfur batteries. The dense negative charges uniformly distributed in the electrolyte membrane inherently prohibit transport of polysulfide anions formed in the cathode inside the polymer matrix and effectively blocks polysulfide shuttling. A battery assembled with the composite separator exhibits a remarkably long cycle life at high charge/discharge rates.

SUBMITTER: Sun Y

PROVIDER: S-EPMC4761998 | biostudies-literature | 2016 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

High rate lithium-sulfur battery enabled by sandwiched single ion conducting polymer electrolyte.

Sun Yubao Y Li Gai G Lai Yuanchu Y Zeng Danli D Cheng Hansong H

Scientific reports 20160222

Lithium-sulfur batteries are highly promising for electric energy storage with high energy density, abundant resources and low cost. However, the battery technologies have often suffered from a short cycle life and poor rate stability arising from the well-known "polysulfide shuttle" effect. Here, we report a novel cell design by sandwiching a sp(3) boron based single ion conducting polymer electrolyte film between two carbon films to fabricate a composite separator for lithium-sulfur batteries. ...[more]

PMID: 26898772

Similar Datasets

Lithium-ion conducting oxide single crystal as solid electrolyte for advanced lithium battery application.

Project description:Today, all-solid-state secondary lithium-ion batteries have attracted attention in research and development all over the world as a next-generation energy storage device. A key material for the all-solid-state lithium batteries is inorganic solid electrolyte, including oxide and sulfide materials. Among the oxide electrolytes, garnet-type oxide exhibits the highest lithium-ion conductivity and a wide electrochemical potential window. However, they have major problems for practical realization. One of the major problems is an internal short-circuit in charging and discharging. In the polycrystalline garnet-type oxide electrolyte, dendrites of lithium metal easily grow through the void or impurity in grain boundaries of the sintered body, which causes serious internal short-circuits in the battery system. To solve these problems, we present an all-solid-state battery system using a single-crystal oxide electrolyte. We are the first to successfully grow centimeter-sized single crystals of garnet-type by the floating zone method. The single-crystal solid electrolyte exhibits an extremely high lithium-ion conductivity of 10-3 S cm-1 at 298 K. The garnet-type single-crystal electrolyte has an advantageous bulk nature to realize the bulk conductivity without grain boundaries such as in a sintered polycrystalline body, and will be a game-changing technology for achieving highly safe advanced battery systems.

| S-EPMC6028625 | biostudies-literature

A lithium-ion sulfur battery using a polymer, polysulfide-added membrane.

Project description:In this paper we report the performances of a lithium-ion sulfur battery characterized by a polymer configuration. The cell, based on a sulfur-carbon cathode, a Li-Sn-C nanostructured anode and a PEO-based, polysulfide-added electrolyte, shows very good electrochemical performances in terms of stability and delivered capacity. The remarkable cell performances are ascribed to the mitigation of the cathode dissolution process due to the buffer action ensured by the polysulfide added to the polymer electrolyte. This electrolyte configuration allows the achievement of a stable capacity ranging from 500 to 1500 mAh gS(-1), depending on the cycling rate. The use of a polymer electrolyte and the replacement of the lithium metal with a Li-Sn-C nanostructured alloy are expected to guarantee high safety content, thus suggesting the battery here studied as advanced energy storage system.

| S-EPMC5154567 | biostudies-literature

A lithium ion battery using an aqueous electrolyte solution.

Project description:Energy and environmental pollution have become the two major problems in today's society. The development of green energy storage devices with good safety, high reliability, high energy density and low cost are urgently demanded. Here we report on a lithium ion battery using an aqueous electrolyte solution. It is built up by using graphite coated with gel polymer membrane and LISICON as the negative electrode, and LiFePO4 in aqueous solution as the positive electrode. Its average discharge voltage is up to 3.1 V and energy density based on the two electrode materials is 258 Wh kg(-1). It will be a promising energy storage system with good safety and efficient cooling effects.

| S-EPMC4916472 | biostudies-literature

Flexible High Lithium-Ion Conducting PEO-Based Solid Polymer Electrolyte with Liquid Plasticizers for High Performance Solid-State Lithium Batteries.

Project description:Lithium-ion secondary batteries (LIB) with high energy density have attracted much attention for electric vehicle (EV) applications. However, LIBs have a safety problem because these batteries contain a flammable organic electrolyte. As such, all-solid secondary batteries that are not flammable have been extensively reported recently. In this study, we have focused on polymer electrolytes, which is flexible and is expected to address the safety problem. However, the conventional polymer electrolytes have low electrial conductivity at room temperature. Various attempts have been made to solve this problem, such as the addition of inorganic fillers and ionic liquids; however, these composite polymer electrolytes have not yet reached a practical level of lithium-ion conductivity. In this study, high electrical conductivity and lithium dendrite formation-free PEO based composite electrolytes are developed with both a filler of Li6,4La3Zr1.4Ta0.6O12 and liquid plasticizers of tetraethylene glycol dimethyl ether and 1,2 dimethoxyethane. The proposed flexible polymer electrolyte shows a high electrical conduciviy of 6.01×10-4 S cm-1 at 25 °C.

| S-EPMC11633345 | biostudies-literature

Novel sulfur-doped single-ion conducting multi-block copolymer electrolyte.

Project description:Solid-state lithium batteries are considered one of the most promising candidates for future electrochemical energy storage. However, both inorganic solid electrolytes (such as oxide-based or sulfide-based materials) and polymer electrolytes still have to overcome several challenges to replace the currently used liquid organic electrolytes. An increasingly adopted approach to overcome these challenges relies on the combination of different electrolyte systems. Herein, we report the synthesis and characterization of a novel sulfur-doped single-ion conducting multi-block copolymer (SIC-BCE) system. This SIC-BCE may serve as interlayer between the electrodes and the sulfidic electrolyte such as Li6PS5Cl, thus benefitting of the high ionic conductivity of the latter and the favorable interfacial contact and electrochemical stability of the polymer. The polymer shows excellent ionic conductivity when swollen with ethylene carbonate and allows for stable stripping/plating of lithium, accompanied by a suitable electrochemical stability towards reduction and oxidation. First tests in symmetric Cu|SIC-BCE|Li6PS5Cl|SIC-BCE|Cu cells confirm the general suitability of the polymer to stabilize the electrode|electrolyte interface by preventing the direct contact of the sulfidic electrolyte with, e.g., metallic copper foils.

| S-EPMC9445549 | biostudies-literature

Bioinspired gel polymer electrolyte for wide temperature lithium metal battery.

Project description:Stable operation of Li metal batteries with gel polymer electrolytes in a wide temperature range is highly expected. However, insufficient dynamics of ion transport and unstable electrolyte-electrode interfaces at extreme temperatures greatly hinder their practical applications. We report a bioinspired gel polymer electrolyte that enables high-energy-density Li metal batteries to work stably in a wide temperature range from -30 to 80 °C. The wide-temperature gel polymer electrolyte is fabricated by using a branched polymer of which side chains are double coupled with their asymmetric analogues. The double dipole coupling regulates the Li+ coordination environment to form a weak solvation structure that offers fast and uniform Li+ deposition at extreme temperatures. Consequently, the non-flammable gel polymer electrolyte displays an ionic conductivity of 1.03 × 10-4 S cm-1 at -40 °C and a Li+ transference number of 0.83. The Li metal batteries with LiNi0.8Co0.1Mn0.1O2 positive electrode deliver initial specific discharge capacities of 121.4 mAh g-1 at -30 °C and 172.2 mAh g-1 at 80 °C, with corresponding discharge currents of 18.8 mA g-1 and 188 mA g-1, respectively. Additionally, a pouch cell delivers a specific energy up to 490.8 Wh kg-1.

| S-EPMC11904243 | biostudies-literature

Long-Life Lithium-Ion Sulfur Pouch Battery Enabled by Regulating Solvent Molecules and Using Lithiated Graphite Anode.

Project description:The development of lithium-sulfur (Li-S) batteries is severely limited by the shuttle effect and instability of Li-metal anode. Constructing Li-ion S batteries (LISBs), by using more stable commercial graphite (Gr) anode instead of Li-metal, is an effective way to realize long-cycle-life Li-S batteries. However, Gr electrode is usually incompatible with the ether-based electrolytes commonly used for Li-S batteries due to the Li+ -ether complex co-intercalation into Gr interlayers. Herein, a solvent molecule structure regulation strategy is provided to weaken the Li+ -solvent binding by increasing steric hindrance and electronegativity, to accelerate Li+ de-solvation process and prevent Li+ -ether complex co-intercalation into Gr anode. Meanwhile, the weakly solvating power of solvent can suppress the shuttle effect of lithium polysulfides and makes more anions participate in Li+ solvation structure to generate a stable anion-derived solid electrolyte interface on Gr surface. Therefore, a LISB coin-cell consisting of lithiated graphite anode and S@C cathode displays a stable capacity of ≈770 mAh g-1 within 200 cycles. Furthermore, an unprecedented practical LISB pouch-cell with a high Gr loading (≈10.5 mg cm-2 ) also delivers a high initial capacity of 802.3 mAh g-1 and releases a stable capacity of 499.1 mAh g-1 with a high Coulombic efficiency (≈95.9%) after 120 cycles.

| S-EPMC10602568 | biostudies-literature

Reactive molecular dynamics simulations of lithium-ion battery electrolyte degradation.

Project description:The development of reliable computational methods for novel battery materials has become essential due to the recently intensified research efforts on more sustainable energy storage materials. Here, we use a recently developed framework allowing to consistently incorporate quantum-mechanical activation barriers to classical molecular dynamics simulations to study the reductive solvent decomposition and formation of the solid electrolyte interphase for a graphite/carbonate electrolyte interface. We focus on deriving condensed-phase effective rates based on the elementary gas-phase reduction and decomposition energy barriers. After a short initial transient limited by the elementary barriers, we observe that the effective rate shows a transition to a kinetically slow regime influenced by the changing coordination environment and the ionic fluxes between the bulk electrolyte and the interface. We also discuss the impact of the decomposition on the ionic mobility. Thus, our work shows how elementary first-principles properties can be mechanistically leveraged to provide fundamental insights into electrochemical stability of battery electrolytes.

| S-EPMC11584793 | biostudies-literature

Lithium-ion battery electrolyte mobility at nano-confined graphene interfaces.

Project description:Interfaces are essential in electrochemical processes, providing a critical nanoscopic design feature for composite electrodes used in Li-ion batteries. Understanding the structure, wetting and mobility at nano-confined interfaces is important for improving the efficiency and lifetime of electrochemical devices. Here we use a Surface Forces Apparatus to quantify the initial wetting of nanometre-confined graphene, gold and mica surfaces by Li-ion battery electrolytes. Our results indicate preferential wetting of confined graphene in comparison with gold or mica surfaces because of specific interactions of the electrolyte with the graphene surface. In addition, wetting of a confined pore proceeds via a profoundly different mechanism compared with wetting of a macroscopic surface. We further reveal the existence of molecularly layered structures of the confined electrolyte. Nanoscopic confinement of less than 4-5 nm and the presence of water decrease the mobility of the electrolyte. These results suggest a lower limit for the pore diameter in nanostructured electrodes.

| S-EPMC5007463 | biostudies-literature

Polyaspartate Polyurea-Based Solid Polymer Electrolyte with High Ionic Conductivity for the All-Solid-State Lithium-Ion Battery.

Project description:The existing in situ preparation methods of solid polymer electrolytes (SPEs) often require the use of a solvent, which would lead to a complicated process and potential safety hazards. Therefore, it is urgent to develop a solvent-free in situ method to produce SPEs with good processability and excellent compatibility. Herein, a series of polyaspartate polyurea-based SPEs (PAEPU-based SPEs) with abundant (PO)x(EO)y(PO)z segments and cross-linked structures were developed by systematically regulating the molar ratios of isophorone diisocyanate (IPDI) and isophorone diisocyanate trimer (tri-IPDI) in the polymer backbone and LiTFSI concentrations via an in situ polymerization method, which gave rise to good interfacial compatibility. Furthermore, the in situ-prepared PAEPU-SPE@D15 based on the IPDI/tri-IPDI molar ratio of 2:1 and 15 wt % LiTFSI exhibits an improved ionic conductivity of 6.80 × 10-5 S/cm at 30 °C and could reach 10-4 orders of magnitude when the temperature was above 40 °C. The Li|LiFePO4 battery based on PAEPU-SPE@D15 had a wide electrochemical stability window of 5.18 V, demonstrating a superior interface compatibility toward LiFePO4 and the lithium metal anode, exhibited a high discharge capacity of 145.7 mAh g-1 at the 100th cycle and a capacity retention of 96.8%, and retained a coulombic efficiency of above 98.0%. These results showed that the PAEPU-SPE@D15 system displayed a stable cycle performance, excellent rate performance, and high safety compared with PEO systems, indicating that the PAEPU-based SPE system may play a crucial role in the future.

| S-EPMC10268638 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data