Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A lithium-ion sulfur battery using a polymer, polysulfide-added membrane.

ABSTRACT: In this paper we report the performances of a lithium-ion sulfur battery characterized by a polymer configuration. The cell, based on a sulfur-carbon cathode, a Li-Sn-C nanostructured anode and a PEO-based, polysulfide-added electrolyte, shows very good electrochemical performances in terms of stability and delivered capacity. The remarkable cell performances are ascribed to the mitigation of the cathode dissolution process due to the buffer action ensured by the polysulfide added to the polymer electrolyte. This electrolyte configuration allows the achievement of a stable capacity ranging from 500 to 1500?mAh gS(-1), depending on the cycling rate. The use of a polymer electrolyte and the replacement of the lithium metal with a Li-Sn-C nanostructured alloy are expected to guarantee high safety content, thus suggesting the battery here studied as advanced energy storage system.

SUBMITTER: Agostini M

PROVIDER: S-EPMC5154567 | biostudies-literature | 2015 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

A lithium-ion sulfur battery using a polymer, polysulfide-added membrane.

Agostini Marco M Hassoun Jusef J

Scientific reports 20150105

In this paper we report the performances of a lithium-ion sulfur battery characterized by a polymer configuration. The cell, based on a sulfur-carbon cathode, a Li-Sn-C nanostructured anode and a PEO-based, polysulfide-added electrolyte, shows very good electrochemical performances in terms of stability and delivered capacity. The remarkable cell performances are ascribed to the mitigation of the cathode dissolution process due to the buffer action ensured by the polysulfide added to the polymer ...[more]

PMID: 25558001

Similar Datasets

High sulfur-containing carbon polysulfide polymer as a novel cathode material for lithium-sulfur battery.

Project description:The lithium-sulfur battery, which offers a high energy density and is environmental friendly, is a promising next generation of rechargeable energy storage system. However, despite these attractive attributes, the commercialization of lithium-sulfur battery is primarily hindered by the parasitic reactions between the Li metal anode and dissolved polysulfide species from the cathode during the cycling process. Herein, we synthesize the sulfur-rich carbon polysulfide polymer and demonstrate that it is a promising cathode material for high performance lithium-sulfur battery. The electrochemical studies reveal that the carbon polysulfide polymer exhibits superb reversibility and cycle stability. This is due to that the well-designed structure of the carbon polysulfide polymer has several advantages, especially, the strong chemical interaction between sulfur and the carbon framework (C-S bonds) inhibits the shuttle effect and the ? electrons of the carbon polysulfide compound enhance the transfer of electrons and Li+. Furthermore, as-prepared carbon polysulfide polymer-graphene hybrid cathode achieves outstanding cycle stability and relatively high capacity. This work highlights the potential promise of the carbon polysulfide polymer as the cathode material for high performance lithium-sulfur battery.

| S-EPMC5595856 | biostudies-other

High rate lithium-sulfur battery enabled by sandwiched single ion conducting polymer electrolyte.

Project description:Lithium-sulfur batteries are highly promising for electric energy storage with high energy density, abundant resources and low cost. However, the battery technologies have often suffered from a short cycle life and poor rate stability arising from the well-known "polysulfide shuttle" effect. Here, we report a novel cell design by sandwiching a sp(3) boron based single ion conducting polymer electrolyte film between two carbon films to fabricate a composite separator for lithium-sulfur batteries. The dense negative charges uniformly distributed in the electrolyte membrane inherently prohibit transport of polysulfide anions formed in the cathode inside the polymer matrix and effectively blocks polysulfide shuttling. A battery assembled with the composite separator exhibits a remarkably long cycle life at high charge/discharge rates.

| S-EPMC4761998 | biostudies-literature

Tunnel Structure Enhanced Polysulfide Conversion for Inhibiting "Shuttle Effect" in Lithium-Sulfur Battery.

Project description:The Lithium sulfur (Li-S) battery has a great potential to replace lithium-ion batteries due to its high-energy density. However, the "shuttle effect" of polysulfide intermediates (Li2S8, Li2S6, Li2S4, etc.) from the cathode can lead to rapid capacity decay and low coulombic efficiency, thus limiting its further development. Anchoring polysulfide and inhibiting polysulfide migration in electrolytes is one of the focuses in Li-S battery. It is well known that polar metal oxides-manganese oxides (MnO2) are normally used as an effective inhibitor for its polysulfide inhibiting properties. Considering the natural 1D tunnel structure, MnO2 with three kinds of typical tunnel-type were screened to study the effects of the tunnel size on the adsorption capacity of polysulfide. We found that MnO2 with larger tunnel sizes has stronger chemisorption capacity of polysulfide. It promotes the conversion of polysulfide, and corresponding cathode exhibits better cycle reliability and rate performance in the cell comparison tests. This work should point out a new strategy for the cathode design of advanced Li-S battery by controlling the tunnel size.

| S-EPMC9415869 | biostudies-literature

Transport Properties of Polysulfide Species in Lithium-Sulfur Battery Electrolytes: Coupling of Experiment and Theory.

Project description:A comprehensive experimental and theoretical analysis of the isothermal transport of species for the two model ternary-electrolytes with LiTFSI-Li2S4/dioxolane (DOL)-dimethoxyethane (DME) and LiTFSI-Li2S6/DOL-DME formulations is presented. An unambiguous picture of the polysulfide's mobility is set forth after a detailed investigation of the macroscopic transference number and diffusion coefficients. The new findings of incongruent diffusion for Li2S4 species and high significance of cross-term diffusion coefficients reformulate a fledgling view of the prevalent redox-shuttle phenomena. The practical implications of this complex mechanism are discussed in detail.

| S-EPMC4999976 | biostudies-literature

Single lithium-ion channel polymer binder for stabilizing sulfur cathodes.

Project description:Lithium-sulfur batteries have great potential for high-performance energy-storage devices, yet the severe diffusion of soluble polysulfide to electrolyte greatly limits their practical applications. To address the above issues, herein we design and synthesize a novel polymer binder with single lithium-ion channels allowing fast lithium-ion transport while blocking the shuttle of unnecessary polysulfide anions. In situ UV-vis spectroscopy measurements reveal that the prepared polymer binder has effective immobilization to polysulfide intermediates. As expected, the resultant sulfur cathode achieves an excellent specific capacity of 1310 mAh g-1 at 0.2 C, high Coulombic efficiency of 99.5% at 0.5 C after 100 cycles and stable cycling performance for 300 cycles at 1 C (1 C = 1675 mA g-1). This study reports a new avenue to assemble a polymer binder with a single lithium-ion channel for solving the serious problem of energy attenuation of lithium-sulfur batteries.

| S-EPMC8288923 | biostudies-literature

Improving Cyclability of Lithium Metal Anode via Constructing Atomic Interlamellar Ion Channel for Lithium Sulfur Battery.

Project description:Uniform migration of lithium (Li) ions between the separator and the lithium anode is critical for achieving good quality Li deposition, which is of much significance for lithium metal battery operation, especially for Li-sulfur (Li-S) batteries. Commercial separators such as polypropylene or polyethylene can be prepared by wet or dry processes, but they can indeed cause plentiful porosities, resulting in the uneven Li ion stripping/plating and finally the formation of Li dendrites. Thence, we constructed an atomic interlamellar ion channel by introducing the layered montmorillonite on the surface of the separator to guide Li ion flux and achieved stable Li deposition. The atomic interlamellar ion channel with a spacing of 1.4 nm showed strong absorption capacity for electrolytes and reserved capacity for Li ions, thus promoting rapid transfer of Li ions and resulting in even Li ion deposition at the anode. When assembled with the proposed separator, the Coulombic efficiency of Li||Cu batteries was 98.2% after 200 cycles and stable plating/stripping even after 800 h was achieved for the Li||Li symmetric batteries. Importantly, the proposed separator allows 140% specific capacity increase after 190 cycles as employing the Li-S batteries.

| S-EPMC7988023 | biostudies-literature

Sorting Lithium-Ion Battery Electrode Materials Using Dielectrophoresis.

Project description:Lithium-ion batteries (LIBs) are common in everyday life and the demand for their raw materials is increasing. Additionally, spent LIBs should be recycled to achieve a circular economy and supply resources for new LIBs or other products. Especially the recycling of the active material of the electrodes is the focus of current research. Existing approaches for recycling (e.g., pyro-, hydrometallurgy, or flotation) still have their drawbacks, such as the loss of materials, generation of waste, or lack of selectivity. In this study, we test the behavior of commercially available LiFePO4 and two types of graphite microparticles in a dielectrophoretic high-throughput filter. Dielectrophoresis is a volume-dependent electrokinetic force that is commonly used in microfluidics but recently also for applications that focus on enhanced throughput. In our study, graphite particles show significantly higher trapping than LiFePO4 particles. The results indicate that nearly pure fractions of LiFePO4 can be obtained with this technique from a mixture with graphite.

| S-EPMC10373188 | biostudies-literature

Polysulfide Speciation and Migration in Catholyte Lithium-Sulfur Cells.

Project description:Semi-liquid catholyte Lithium-Sulfur (Li-S) cells have shown to be a promising path to realize high energy density energy storage devices. In general, Li-S cells rely on the conversion of elemental sulfur to soluble polysulfide species. In the case of catholyte cells, the active material is added through polysulfide species dissolved in the electrolyte. Herein, we use operando Raman spectroscopy to track the speciation and migration of polysulfides in the catholyte to shed light on the processes taking place. Combined with ex-situ surface and electrochemical analysis we show that the migration of polysulfides is central in order to maximize the performance in terms of capacity (active material utilization) as well as interphase stability on the Li-metal anode during cycling. More specifically we show that using a catholyte where the polysulfides have the dual roles of active material and conducting species, e. g. no traditional Li-salt (such as LiTFSI) is present, results in a higher mobility and faster migration of polysulfides. We also reveal how the formation of long chain polysulfides in the catholyte is delayed during charge as a result of rapid formation and migration of shorter chain species, beneficial for reaching higher capacities. However, the depletion of ionic species during the last stage of charge, due to the conversion to and precipitation of elemental sulfur on the cathode support, results in polarization of the cell before full conversion can be achieved.

| S-EPMC9303647 | biostudies-literature

A Stable High-Capacity Lithium-Ion Battery Using a Biomass-Derived Sulfur-Carbon Cathode and Lithiated Silicon Anode.

Project description:A full lithium-ion-sulfur cell with a remarkable cycle life was achieved by combining an environmentally sustainable biomass-derived sulfur-carbon cathode and a pre-lithiated silicon oxide anode. X-ray diffraction, Raman spectroscopy, energy dispersive spectroscopy, and thermogravimetry of the cathode evidenced the disordered nature of the carbon matrix in which sulfur was uniformly distributed with a weight content as high as 75 %, while scanning and transmission electron microscopy revealed the micrometric morphology of the composite. The sulfur-carbon electrode in the lithium half-cell exhibited a maximum capacity higher than 1200 mAh gS -1 , reversible electrochemical process, limited electrode/electrolyte interphase resistance, and a rate capability up to C/2. The material showed a capacity decay of about 40 % with respect to the steady-state value over 100 cycles, likely due to the reaction with the lithium metal of dissolved polysulfides or impurities including P detected in the carbon precursor. Therefore, the replacement of the lithium metal with a less challenging anode was suggested, and the sulfur-carbon composite was subsequently investigated in the full lithium-ion-sulfur battery employing a Li-alloying silicon oxide anode. The full-cell revealed an initial capacity as high as 1200 mAh gS -1 , a retention increased to more than 79 % for 100 galvanostatic cycles, and 56 % over 500 cycles. The data reported herein well indicated the reliability of energy storage devices with extended cycle life employing high-energy, green, and safe electrode materials.

| S-EPMC8457143 | biostudies-literature

Solar-Driven Rechargeable Lithium-Sulfur Battery.

Project description:Solar cells and rechargeable batteries are two key technologies for energy conversion and storage in modern society. Here, an integrated solar-driven rechargeable lithium-sulfur battery system using a joint carbon electrode in one structure unit is proposed. Specifically, three perovskite solar cells are assembled serially in a single substrate to photocharge a high energy lithium-sulfur (Li-S) battery, accompanied by direct conversion of the solar energy to chemical energy. In the subsequent discharge process, the chemical energy stored in the Li-S battery is further converted to electrical energy. Therefore, the newly designed battery is capable of achieving solar-to-chemical energy conversion under solar-driven conditions, and subsequently delivering electrical energy from the stored chemical energy. With an optimized structure design, a high overall energy conversion efficiency of 5.14% is realized for the integrated battery. Moreover, owing to the self-adjusting photocharge advantage, the battery system can retain high specific capacity up to 762.4 mAh g-1 under a high photocharge rate within 30 min, showing an effective photocharging feature.

| S-EPMC6685504 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data