Dataset Information

Effect of Root Moisture Content and Diameter on Root Tensile Properties.

ABSTRACT: The stabilization of slopes by vegetation has been a topical issue for many years. Root mechanical characteristics significantly influence soil reinforcement; therefore it is necessary to research into the indicators of root tensile properties. In this study, we explored the influence of root moisture content on tensile resistance and strength with different root diameters and for different tree species. Betula platyphylla, Quercus mongolica, Pinus tabulaeformis, and Larix gmelinii, the most popular tree species used for slope stabilization in the rocky mountainous areas of northern China, were used in this study. A tensile test was conducted after root samples were grouped by diameter and moisture content. The results showedthat:1) root moisture content had a significant influence on tensile properties; 2) slightly loss of root moisture content could enhance tensile strength, but too much loss of water resulted in weaker capacity for root elongation, and consequently reduced tensile strength; 3) root diameter had a strong positive correlation with tensile resistance; and4) the roots of Betula platyphylla had the best tensile properties when both diameter and moisture content being controlled. These findings improve our understanding of root tensile properties with root size and moisture, and could be useful for slope stabilization using vegetation.

SUBMITTER: Yang Y

PROVIDER: S-EPMC4803321 | biostudies-literature | 2016

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Effect of Root Moisture Content and Diameter on Root Tensile Properties.

Yang Yuanjun Y Chen Lihua L Li Ning N Zhang Qiufen Q

PloS one 20160322 3

The stabilization of slopes by vegetation has been a topical issue for many years. Root mechanical characteristics significantly influence soil reinforcement; therefore it is necessary to research into the indicators of root tensile properties. In this study, we explored the influence of root moisture content on tensile resistance and strength with different root diameters and for different tree species. Betula platyphylla, Quercus mongolica, Pinus tabulaeformis, and Larix gmelinii, the most pop ...[more]

PMID: 27003872

Similar Datasets

Project description:The rheological properties parameters of paddy soil affect the interaction between the tillage tools and soil, thus influencing the operation quality and power consumption. In order to study the effects of tillage methods and moisture content on the rheological properties parameters of paddy soil in the middle and lower reaches of the Yangtze River, uniaxial compression creep tests of paddy soils with four moisture contents under no tillage (moisture contents: 26.71%, 24.52%, 23.26%, 21.28%) and plough tillage (moisture contents: 26.77%, 25.55%, 23.40%, 20.56%) were carried out using a TMS-PRO texture analyzer. The creep properties curves obtained from the tests, and the rheological constitutive equation of paddy soil under compression was established by Burgers viscoelastic model. Respectively, the quantitative change rules of creep properties of paddy soil with different moisture contents under different tillage methods and the correlation between these parameters were explored. The results showed that the moisture content under the three-year plough tillage and no tillage methods had significant influence on the rheological properties parameters of paddy soil (P < 0.05). The instantaneous elastic modulus, delay elastic modulus, and viscosity coefficient of the two paddy soils (no tillage and plough tillage soils) decreased with the increase of moisture content. However, the variation rules of relaxation time and delay viscosity coefficient with moisture content differed between these two paddy soils. Specifically, the strain rate of the two paddy soils decreased as moisture content decreased, where the total strain combines elastic strain, viscous strain, and viscoelastic strain. The initial strain rate and steady strain rate of the plough tillage paddy soils were lower than that of the no tillage paddy soils. The established creep model equation could be used to obtain viscoelastic rheological parameters of paddy soil in a wide range. The fitting equations between rheological parameters and moisture content were introduced into Burgers model, and the coupling equations between creep deformation and moisture content and time were derived, which could be used to predict the creep properties and deformation behavior of paddy soil in a certain range of no tillage and ploughed field. Overall, this study has a certain theoretical significance for the development and improvement of paddy soil rheology theory, and can also provide theoretical basis and technical support for the research of agricultural machinery design optimization, field water, soil conservation, soil tillage and compaction related simulation analysis in the middle and lower reaches of the Yangtze River.

Project description:Bond between two cementitious materials is crucial in applications such as repairs, overlays, and connections of prefabricated bridge elements (PBEs), to name just a few. It is the latter that has special interest to the authors of this paper. After performing a dimensional stability study on grout-like materials commonly used as connections between PBEs, it was observed that the so-called 'non-shrink' cementitious grouts showed a considerable amount of early-age shrinkage. This might have negative effects on the integrity of the structure, due not only to the grout material's early degradation, but also to a possible loss of bond between the grout and the prefabricated concrete element. Many factors affect the bond strength between two cementitious materials (e.g., grout-concrete), the presence of moisture at the existing concrete substrate surface being one of them. In this regard, pre-moistening the concrete substrate surface prior to the application of the grout material is sometimes recommended for bond enhancement. This topic has been the focus of numerous research studies in the past; however, there is still controversy among practitioners on the real benefits that this practice might provide. This paper evaluates the tensile bond performance of two non-shrink cementitious grouts applied to the exposed aggregate surface of a concrete substrate, and how the supply of moisture at the grout-concrete interface affects the bond strength. "Pull-off" bond results show increased tensile bond strength when the concrete surface is pre-moistened. Reasons to explain the observed increased bond strength are given after a careful microstructural analysis of the grout-concrete interface. Interfaces where sufficient moisture is provided to the concrete substrate such that moisture movement from the grout is prevented show reduced porosity and increased hydration on the grout side of the interface, which is thought to directly contribute to the increased tensile bond strength.

Project description:To study the shrinkage rule of borehole diameter and its effect on gas extraction, a visco-elastoplastic model for boreholes considering strain softening and the dilatancy characteristic was established to obtain the expressions of the coal stress, variation in diameter, and pressure relief range. The stress distribution and pressure relief effect of the boreholes in soft and hard coal seams were comparatively analyzed. The shrinkage rule of the borehole diameter was studied. The reasons for the rapid reduction in the extraction concentration of the borehole in soft coal seams were described. A technology of improving the gas extraction effect in soft coal seams was developed. The research results showed that the radius of the plastic softening zone is 0.405 m for a borehole in a soft coal seam and 0.224 m for that in a hard coal seam. This indicates that the borehole in a soft coal seam has a better pressure relief effect. The boreholes in both hard and soft coal seams will incur a shrinkage phenomenon; however, the soft coal seam has low strength and a weak ability to resist damage, and thus the surrounding coal will have a more intense creep deformation, leading to an instability failure during a short period of time and thus, a blocking of the extraction channel, thereby causing a rapid reduction in the gas extraction concentration. The borehole in a hard coal seam also shows a shrinkage phenomenon, but remains in a stable state without a blockage; thus, high-concentration gas can be extracted from this borehole for a long period of time. The geo-stress and coal strength are the two main factors controlling the amplitude of borehole shrinkage. From an increase in stress, the borehole in a hard coal seam shows a more intense creep deformation in a deep mine, which may lead to blockage. The key to improving the gas extraction effect in soft coal seams is to maintain a smooth extraction channel. The full screen pipe is installed through the drill pipe to retain an extraction channel, leading to an average gas extraction increase from 0.043 m3/min to 0.12 m3/min, an increase of 2.77 times. These research results are consistent with actual production, and can provide theoretical guidance for determining the gas extraction parameters.

Dataset Information

Effect of Root Moisture Content and Diameter on Root Tensile Properties.

Publications

Effect of Root Moisture Content and Diameter on Root Tensile Properties.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure