Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Direct Copolymerization of CO2 and Diols.

ABSTRACT: Direct polymerization of CO2 and diols is promising as a simple and environmental-benign method in place of conventional processes using high-cost and/or hazardous reagents such as phosgene, carbon monoxide and epoxides, however, there are no reports on the direct method due to the inertness of CO2 and severe equilibrium limitation of the reaction. Herein, we firstly substantiate the direct copolymerization of CO2 and diols using CeO2 catalyst and 2-cyanopyridine promotor, providing the alternating cooligomers in high diol-based yield (up to 99%) and selectivity (up to >99%). This catalyst system is applicable to various diols including linear C4-C10 ?,?-diols to provide high yields of the corresponding cooligomers, which cannot be obtained by well-known methods such as copolymerization of CO2 and cyclic ethers and ring-opening polymerization of cyclic carbonates. This process provides us a facile synthesis method for versatile polycarbonates from various diols and CO2 owing to simplicity of diols modification.

SUBMITTER: Tamura M

PROVIDER: S-EPMC4831014 | biostudies-literature | 2016 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Direct Copolymerization of CO2 and Diols.

Tamura Masazumi M Ito Kazuki K Honda Masayoshi M Nakagawa Yoshinao Y Sugimoto Hiroshi H Tomishige Keiichi K

Scientific reports 20160414

Direct polymerization of CO2 and diols is promising as a simple and environmental-benign method in place of conventional processes using high-cost and/or hazardous reagents such as phosgene, carbon monoxide and epoxides, however, there are no reports on the direct method due to the inertness of CO2 and severe equilibrium limitation of the reaction. Herein, we firstly substantiate the direct copolymerization of CO2 and diols using CeO2 catalyst and 2-cyanopyridine promotor, providing the alternat ...[more]

PMID: 27075987

Similar Datasets

Direct synthesis of polyamides via catalytic dehydrogenation of diols and diamines.

Project description:We report a direct synthesis of polyamides via catalytic dehydrogenation of diols and diamines. A PNN pincer ruthenium complex, the Milstein catalyst, was used for this reaction and polyamides with number average molecular weight from ?10 to 30 kDa could be obtained from a wide variety of diols and diamines bearing aliphatic or aromatic, linear or cyclic spacers. Because of the high catalytic selectivity of primary amine over secondary amine, polyamines could be conveniently incorporated into linear polyamides without tedious protection/deprotection steps. Compared with conventional condensation method, this catalytic system avoids the requirement of stoichiometric preactivation or in situ activation reagents and provides a much cleaner process with high atomic economy.

| S-EPMC3033491 | biostudies-literature

A New Dinuclear Cobalt Complex for Copolymerization of CO2 and Propylene Oxide: High Activity and Selectivity.

Project description:Based on the ligand H4Salen-8tBu (salen-4), a new dinuclear cobalt complex (salen-4)[Co(III)TFA]2 (salen-4 = 3,5-di-tert-butylsalicylaldehyde-3,3'-diaminobiphenylamine; TFA = trifluoroacetic acid) has been firstly synthesized and characterized. It shows high catalytic activity for the copolymerization of propylene oxide (PO) and carbon dioxide (CO2), yielding regioregular poly(propylene carbonate) (PPC) with little generation of propylene carbonate (PC) by-product. It has been found that (salen-4)[Co(III)TFA]2 shows higher activity at milder conditions, generating a polymer with maximum Mn of 293 kg/mol and a narrow molecular weight distribution PDI of 1.35. The influences of reaction time, CO2 pressure, reaction temperature, nature of the cocatalyst, catalyst dosage and substrate concentration on the molecular weight, yield and selectivity of the polymer were explored in detail. The results showed that the (salen-4)[Co(III)TFA]2/[PPN]TFA catalyst system demonstrated a remarkable TOF as high as 735 h-1. In addition, a hypothetical catalytic reaction mechanism was proposed based on density functional theory (DFT) calculations and the catalytic reaction results of the (salen-4)[Co(III)TFA]2.

| S-EPMC7571228 | biostudies-literature

Direct copolymerization of ethylene with protic comonomers enabled by multinuclear Ni catalysts.

Project description:Ethylene/polar monomer coordination copolymerization offers an attractive way of making functionalized polyolefins. However, ethylene copolymerization with industrially relevant short chain length alkenoic acid remain a big challenge. Here we report the efficient direct copolymerization of ethylene with vinyl acetic acid by tetranuclear nickel complexes. The protic monomer can be extended to acrylic acid, allylacetic acid, ω-alkenoic acid, allyl alcohol, and homoallyl alcohol. Based on X-ray analysis of precatalysts, control experiments, solvent-assisted electrospray ionization-mass spectrometry detection of key catalytic intermediates, and density functional theory studies, we propose a possible mechanistic scenario that involves a distinctive vinyl acetic acid enchainment enabled by Ni···Ni synergistic effects. Inspired by the mechanistic insights, binuclear nickel catalysts are designed and proved much more efficient for the copolymerization of ethylene with vinyl acetic acid or acrylic acid, achieving the highest turnover frequencies so far for both ethylene and polar monomers simultaneously.

| S-EPMC8560877 | biostudies-literature

Direct enantioseparation of axially chiral 1,1'-biaryl-2,2'-diols using amidine-based resolving agents.

Project description:Amidine-based optically active resolving agents for enantiomer separation of axially chiral 1,1'-biaryl-2,2'-diols have been developed. A strongly basic amidine bearing no substituents on its nitrogen atoms enables the formation of their diastereomeric salts upon being mixed with weakly acidic phenol derivatives. Enantiopure 1,1'-biaryl-2,2'-diols can be obtained in high yields after only one crystallization of their salts with the chiral amidine derived from dehydroabietic acid. X-ray crystallography revealed that the amidine moiety forms a salt with the phenol group and additional intermolecular NH/π interactions contribute to the efficient chiral recognition process.

| S-EPMC9033420 | biostudies-literature

Enhanced Poly(propylene carbonate) with Thermoplastic Networks: A Cross-Linking Role of Maleic Anhydride Oligomer in CO2/PO Copolymerization.

Project description:Cross-linking is an effective way to enhance biodegradable poly(propylene carbonate) (PPC) from CO2 and propylene oxide (PO). Cross-linked PPC can be prepared by one-step terpolymerization of multifunctional third monomers with CO2 and PO. However, few such third monomers are available. Each molecule of maleic anhydride oligomer (MAO) contains more than two cyclic anhydride groups. Here, we use it to synthesize PPC with cross-linked networks by adding a small quantity of MAO (0.625-5 wt% of PO) in CO2/PO copolymerization that was catalyzed by zinc glutarate. The formation of networks in the prepared copolymers was confirmed by the presence of gel in copolymers combined Fourier transform infrared spectroscopy (FT-IR), 1H NMR, and the improved mechanical properties. The 5% weight-loss degradation temperatures and maximum weight-loss degradation temperatures greatly increase up to 289.8 °C and 308.8 °C, respectively, which are remarkably high when compared to those of PPC. The minimum permanent deformation of the copolymers closes to 0, while that of PPC is 173%. The maximum tensile strength of the copolymers is 25.5 MPa higher than that of PPC, reaching 38.4 MPa, and it still has some toughness with the elongation at break of 25%. The above phenomena indicate that MAO that was inserted in PPC chains play a cross-linking role, which results in enhanced thermal stability, dimensional stability, and mechanical strength, comprehensively.

| S-EPMC6780336 | biostudies-literature

One-pot, direct incorporation of [11C]CO2 into carbamates.

Project description:Why beat about the bush? An operationally simple and mild reaction based on the direct fixation of (11)CO(2) with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) has been developed for the synthesis of (11)C-labeled carbamates at 75 degrees C within 10 minutes in radiochemical yields above 70% (see scheme). This strategy should be immediately useful for the construction of new radiotracers for positron emission tomography and other applications.

| S-EPMC2757932 | biostudies-literature

Photoelectrochemical CO2 Reduction at a Direct CuInGaS2/Electrolyte Junction

Project description:Photoelectrochemical (PEC) CO2 reduction has

| S-EPMC10111408 | biostudies-literature

Acceptorless Dehydrogenative Coupling Using Ammonia: Direct Synthesis of N-Heteroaromatics from Diols Catalyzed by Ruthenium.

Project description:The synthesis of N-heteroaromatic compounds via an acceptorless dehydrogenative coupling process involving direct use of ammonia as the nitrogen source was explored. We report the synthesis of pyrazine derivatives from 1,2-diols and the synthesis of N-substituted pyrroles by a multicomponent dehydrogenative coupling of 1,4-diols and primary alcohols with ammonia. The acridine-based Ru-pincer complex 1 is an effective catalyst for these transformations, in which the acridine backbone is converted to an anionic dearomatized PNP-pincer ligand framework.

| S-EPMC6502445 | biostudies-literature

Theoretical study on preference of open polymer vs. cyclic products in CO2/epoxide copolymerization with cobalt(III)-salen bifunctional catalysts.

Project description:The preference of open chain of growing macromolecule vs. possible cyclic form was examined for the bifunctional cobalt(III)-salen catalyst for the copolymerization of CO2 with epoxides. A variety of possible isomers was considered (resulting from trans/cis-? salen arrangement, different mutual orientation of quaternary ammonium-chains, and possible binding modes). To explore the conformational space, a combined approach was applied, utilizing semiempirical (PM7) MD and the DFT calculations. The preference of the open and cyclic macromolecules attached to the metal center was compared with the corresponding results for isolated model macromolecules, and the systems built of the macromolecule interacting with the tetra-butyl ammonium cation. Result shows that the cyclic structures are strongly preferred for isolated ions, with relatively low cyclization barriers. In the field of positive point charge, the open structures are strongly preferred. For the ions interacting with tetrabutyl ammonium cation, the cyclic structures are preferred, due to delocalization of the positive charge in the cation. For the complexes involving model and "real" Co(III)-salen catalysts, the open structures are strongly preferred. The possible cyclization by dissociation of alkoxide and its transfer to the neighborhood of quaternary ammonium cation is characterized by high activation barriers. Further, the transfer of alkoxide from the metal center to the cation is less likely than the transfer of carbonate, since the metal-alkoxide bond-energy energy is much stronger than energy of metal-carbonate bonding, as shown by ETS-NOCV results. The conclusions are in qualitative agreement with experimental data showing high selectivity towards copolymer formation in the copolymerization processes catalyzed by bifunctional Co(III) salen-complexes. Graphical abstract.

| S-EPMC7203596 | biostudies-literature

Direct conversion of CO2 to CH4 on Pd/graphdiyne single-crystalline

Project description: Not available

| S-EPMC11242443 | biostudies-literature