Browse
Submit Data
Databases
API
Help

Dataset Information

23 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Pulse-modulated multilevel data storage in an organic ferroelectric resistive memory diode.

ABSTRACT: We demonstrate multilevel data storage in organic ferroelectric resistive memory diodes consisting of a phase-separated blend of P(VDF-TrFE) and a semiconducting polymer. The dynamic behaviour of the organic ferroelectric memory diode can be described in terms of the inhomogeneous field mechanism (IFM) model where the ferroelectric components are regarded as an assembly of randomly distributed regions with independent polarisation kinetics governed by a time-dependent local field. This allows us to write and non-destructively read stable multilevel polarisation states in the organic memory diode using controlled programming pulses. The resulting 2-bit data storage per memory element doubles the storage density of the organic ferroelectric resistive memory diode without increasing its technological complexity, thus reducing the cost per bit.

SUBMITTER: Lee J

PROVIDER: S-EPMC4832143 | biostudies-literature | 2016 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Pulse-modulated multilevel data storage in an organic ferroelectric resistive memory diode.

Lee Jiyoul J van Breemen Albert J J M AJ Khikhlovskyi Vsevolod V Kemerink Martijn M Janssen Rene A J RA Gelinck Gerwin H GH

Scientific reports 20160415

We demonstrate multilevel data storage in organic ferroelectric resistive memory diodes consisting of a phase-separated blend of P(VDF-TrFE) and a semiconducting polymer. The dynamic behaviour of the organic ferroelectric memory diode can be described in terms of the inhomogeneous field mechanism (IFM) model where the ferroelectric components are regarded as an assembly of randomly distributed regions with independent polarisation kinetics governed by a time-dependent local field. This allows us ...[more]

PMID: 27080264

Similar Datasets

Stable and Multilevel Data Storage Resistive Switching of Organic Bulk Heterojunction.

Project description:Organic nonvolatile memory devices have a vital role for the next generation of electrical memory units, due to their large scalability and low-cost fabrication techniques. Here, we show bipolar resistive switching based on an Ag/ZnO/P3HT-PCBM/ITO device in which P3HT-PCBM acts as an organic heterojunction with inorganic ZnO protective layer. The prepared memory device has consistent DC endurance (500 cycles), retention properties (104 s), high ON/OFF ratio (105), and environmental stability. The observation of bipolar resistive switching is attributed to creation and rupture of the Ag filament. In addition, our conductive bridge random access memory (CBRAM) device has adequate regulation of the current compliance leads to multilevel resistive switching of a high data density storage.

| S-EPMC7912748 | biostudies-literature

Investigation of multilevel data storage in silicon-based polycrystalline ferroelectric tunnel junction.

Project description:Multilevel data ferroelectric tunnel junction is a breakthrough for further improving the storage density of ferroelectric random access memories. However, the application of these ferroelectric tunnel junctions is limited by high cost of epitaxial perovskite heterostructures, unsatisfactory retention and difficulty of exactly controlling the middle polarization states. In order to overcome the issues, we develop a ferroelectric tunnel junction with smooth ultrathin polycrystalline BiFeO3 (BFO) film. Through controlling the polarization state and oxygen vacancy migration using voltage pulses, we demonstrate that voltage-controlled barrier yields a memristive behavior in the device, in which the resistance variations exceed over two orders of magnitude. And we achieve multi logic states written and read easily using voltage pulses in the device. Especially the device is integrated with the silicon technology in modern microelectronics. Our results suggest new opportunity for ferroelectrics as high storage density nonvolatile memories.

| S-EPMC5495759 | biostudies-literature

Nonvolatile multilevel data storage memory device from controlled ambipolar charge trapping mechanism.

Project description:The capability of storing multi-bit information is one of the most important challenges in memory technologies. An ambipolar polymer which intrinsically has the ability to transport electrons and holes as a semiconducting layer provides an opportunity for the charge trapping layer to trap both electrons and holes efficiently. Here, we achieved large memory window and distinct multilevel data storage by utilizing the phenomena of ambipolar charge trapping mechanism. As fabricated flexible memory devices display five well-defined data levels with good endurance and retention properties showing potential application in printed electronics.

| S-EPMC3728587 | biostudies-literature

Multilevel storage and photoinduced-reset memory by an inorganic perovskite quantum-dot/polystyrene floating-gate organic transistor.

Project description:Inorganic halide perovskite quantum dots (IHP QDs) have been widely studied in optoelectronic devices because of their size-dependent tunable bandgaps, long electron-hole diffusion lengths and excellent absorption properties. Herein, a novel floating-gate organic field-effect transistor memory (FGOFETM) is demonstrated, comprising a floating-gate of IHP QDs embedded in a polystyrene matrix. Notably, the FGOFETM exhibits photoinduced-reset characteristic that allows data removal by photo irradiation. This feature makes low energy-consuming memory and innovative devices possible. The nonvolatile devices also show a large memory window (≈90 V), ultrahigh memory on/off ratio (over 107) and therefore excellent multilevel information storage, in which 4 recognizable non-volatile states and long retention time (up to 10 years) are obtained. This work not only offers an effective guideline of high-performance FGOFETMs, but also shows great potential to realize multilevel data storage under electrical programming and photoinduced-reset processes.

| S-EPMC9058139 | biostudies-literature

Resistive Switching Memory Phenomena in PEDOT PSS: Coexistence of Switchable Diode Effect and Write Once Read Many Memory.

Project description:We study resistive switching memory phenomena in conducting polymer PEDOT PSS. In the same film, there are two types of memory behavior coexisting; namely, the switchable diode effect and write once read many memory. This is the first report on switchable diode phenomenon based on conducting organic materials. The effect was explained as charge trapping of PEDOT PSS film and movement of proton. The same PEDOT PSS device also exhibits write once read many memory (WORM) phenomenon which arises due to redox reaction that reduces PEDOT PSS and renders it non-conducting. The revelation of these two types of memory phenomena in PEDOT PSS highlights the remarkable versatility of this conducting conjugated polymer.

| S-EPMC4726348 | biostudies-literature

Enhancing the Data Reliability of Multilevel Storage in Phase Change Memory with 2T2R Cell Structure.

Project description:Multilevel storage and the continuing scaling down of technology have significantly improved the storage density of phase change memory, but have also brought about a challenge, in that data reliability can degrade due to the resistance drift. To ensure data reliability, many read and write operation technologies have been proposed. However, they only mitigate the influence on data through read and write operations after resistance drift occurs. In this paper, we consider the working principle of multilevel storage for PCM and present a novel 2T2R structure circuit to increase the storage density and reduce the influence of resistance drift fundamentally. To realize 3-bit per cell storage, a wide range of resistances were selected as different states of phase change memory. Then, we proposed a 4:3 compressing encoding scheme to transform the output data into binary data states. Therefore, the designed 2T2R was proven to have optimized storage density and data reliability by monitoring the conductance distribution at four time points (1 ms, 1 s, 6 h, 12 h) in 4000 devices. Simulation results showed that the resistance drift of our proposed 2T2R structure can significantly improve the storage density of multilevel storage and increase the data reliability of phase change memory.

| S-EPMC8467895 | biostudies-literature

Black Phosphorus Quantum Dots with Tunable Memory Properties and Multilevel Resistive Switching Characteristics.

Project description:Solution-processed black phosphorus quantum-dot-based resistive random access memory is demonstrated with tunable characteristics, multilevel data storage, and ultrahigh ON/OFF ratio. Effects of the black phosphorous quantum dots layer thickness and the compliance current setting on resistive switching behavior are systematically studied. Our devices can yield a series of SET voltages and current levels, hence having the potential for practical applications in the flexible electronics industry.

| S-EPMC5566243 | biostudies-literature

Giant Electroresistive Ferroelectric Diode on 2DEG.

Project description:Manipulation of electrons in a solid through transmitting, storing, and switching is the fundamental basis for the microelectronic devices. Recently, the electroresistance effect in the ferroelectric capacitors has provided a novel way to modulate the electron transport by polarization reversal. Here, we demonstrate a giant electroresistive ferroelectric diode integrating a ferroelectric capacitor into two-dimensional electron gas (2DEG) at oxide interface. As a model system, we fabricate an epitaxial Au/Pb(Zr(0.2)Ti(0.8))O3/LaAlO3/SrTiO3 heterostructure, where 2DEG is formed at LaAlO3/SrTiO3 interface. This device functions as a two-terminal, non-volatile memory of 1 diode-1 resistor with a large I+/I- ratio (>10(8) at ± 6 V) and I(on)/I(off) ratio (>10(7)). This is attributed to not only Schottky barrier modulation at metal/ferroelectric interface by polarization reversal but also the field-effect metal-insulator transition of 2DEG. Moreover, using this heterostructure, we can demonstrate a memristive behavior for an artificial synapse memory, where the resistance can be continuously tuned by partial polarization switching, and the electrons are only unidirectionally transmitted. Beyond non-volatile memory and logic devices, our results will provide new opportunities to emerging electronic devices such as multifunctional nanoelectronics and neuromorphic electronics.

| S-EPMC4444968 | biostudies-literature

Controlled inter-state switching between quantized conductance states in resistive devices for multilevel memory.

Project description:A detailed understanding of quantization conductance (QC), the correlation with resistive switching phenomena and controlled manipulation of quantized states is crucial for realizing atomic-scale multilevel memory elements. Here, we demonstrate highly stable and reproducible quantized conductance states (QC-states) in Al/niobium oxide/Pt resistive switching devices. Three levels of control over the QC-states, required for multilevel quantized state memories, like, switching ON to different quantized states, switching OFF from quantized states, and controlled inter-state switching among one QC state to another has been demonstrated by imposing limiting conditions of stop-voltage and current compliance. The well-defined multiple QC states along with a working principle for switching among various states show promise for implementation of multilevel memory devices.

| S-EPMC9062199 | biostudies-literature

Quantum tunnelling and charge accumulation in organic ferroelectric memory diodes.

Project description:Non-volatile memories-providing the information storage functionality-are crucial circuit components. Solution-processed organic ferroelectric memory diodes are the non-volatile memory candidate for flexible electronics, as witnessed by the industrial demonstration of a 1?kbit reconfigurable memory fabricated on a plastic foil. Further progress, however, is limited owing to the lack of understanding of the device physics, which is required for the technological implementation of high-density arrays. Here we show that ferroelectric diodes operate as vertical field-effect transistors at the pinch-off. The tunnelling injection and charge accumulation are the fundamental mechanisms governing the device operation. Surprisingly, thermionic emission can be disregarded and the on-state current is not space charge limited. The proposed model explains and unifies a wide range of experiments, provides important design rules for the implementation of organic ferroelectric memory diodes and predicts an ultimate theoretical array density of up to 1012?bit?cm-2.

| S-EPMC5477493 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data