Biodiesel Production from Chlorella protothecoides Oil by Microwave-Assisted Transesterification.
Ontology highlight
ABSTRACT:
SUBMITTER: Gulyurt MO
PROVIDER: S-EPMC4849035 | biostudies-literature | 2016 Apr
REPOSITORIES: biostudies-literature
Publications
Biodiesel Production from Chlorella protothecoides Oil by Microwave-Assisted Transesterification.
Gülyurt Mustafa Ömer MÖ Özçimen Didem D İnan Benan B
International journal of molecular sciences 20160422 4
In this study, biodiesel production from microalgal oil by microwave-assisted transesterification was carried out to investigate its efficiency. Transesterification reactions were performed by using Chlorella protothecoides oil as feedstock, methanol, and potassium hydroxide as the catalyst. Methanol:oil ratio, reaction time and catalyst:oil ratio were investigated as process parameters affected methyl ester yield. 9:1 methanol/oil molar ratio, 1.5% KOH catalyst/oil ratio and 10 min were optimum ...[more]
Similar Datasets
Project description:To produce biodiesel cost-effective, low-cost, high free fatty acid (FFA) oil feedstock is desirable. But high FFA creates difficulty during the base-catalyzed transesterification process by yield loss due to the formation of soap. However, these problems are overcome by the use of an acid catalyst. The acid catalysts can directly convert both triglycerides and FFAs into biodiesel without the formation of soaps or emulsions. The shortcomings of mostly used inorganic acids are that they work well for esterification of FFA present in low-cost oil, but their kinetics for transesterification of triglycerides present in oils is considerably slower. Corrosion of equipment is another major problem associated with an inorganic acid catalyst. The usage of an organic acid catalyst of the alkyl benzene sulfonic type, like 4-dodecyl benzene sulfonic acid (DBSA) minimizes these disadvantages of inorganic acid-catalyzed transesterification. The aim of the present investigation was to reduce the reaction time of transesterification of triglycerides further by using microwaves as a heating source in the presence of DBSA catalyst to achieve higher conversions under mild operating conditions. To optimize the transesterification variables for the higher conversion of biodiesel, the response surface methodology was employed to design the experiment. By using the DBSA catalyst under microwave heating at a temperature of 76 °C, conversion close to 100% in only 30 min of reaction time was obtained using a 0.09 molar ratio of catalyst to oil and 9.0 molar ratio of methanol to oil. A modified polynomial model was developed and was adequately fitted with the experimental data and could be used for understanding the effect of various process parameters. The catalyst to oil molar ratio and reaction temperature created a stronger effect on the biodiesel production than that exhibited by the methanol to oil molar ratio. It was observed that the microwave heating process outperformed conventional heating, providing a rapid, easy method for biodiesel synthesis from triglycerides in the presence of DBSA, an organic acid catalyst. The produced biodiesel was of good quality, as all the properties were within the prescribed limits of the ASTM D6751 standard.
| S-EPMC7718927 | biostudies-literature
Project description:Biodiesel, a mixture of fatty acid methyl esters (FAME), is bio-renewable, non-toxic, biodegradable, and is an attractive alternative to petroleum diesel. This work studied the sonochemical transesterification of Lesquerella fendleri oil (LFO) using inexpensive solid Lewis acid (LA) catalysts with an aim to reduce environmental pollution and dependance on non-renewable fuel sources. Due to the presence of hydroxy fatty acid methyl esters (HFAME) in LFO (∼60%), in addition to producing biofuel it can also be used to generate chemically important estolides and cyclic lactones. AlCl3, SnCl2, and Sn(CH3COO)2 showed catalytic activity using direct immersion ultrasound (DI-US) among a list of LA catalysts investigated, with AlCl3 being the best catalyst. Ultrasound increased the reaction rate by facilitating carbocation formation of glyceridic carbons. Experiments were carried out at room temperature in a solvent range from 3:1 to 18:1 methanol-to-oil molar ratio and catalyst loading from 1 wt% to 6 wt% over 10 to 60 min sonication time at 48% ultrasound amplitude (roughly 17 W/cm2). Complete conversion (>99%) was achieved in 40 min with 5 wt% AlCl3 catalyst. A statistical regression analysis with STATA 14.0 software was performed to optimize process parameters. Chemical characterizations of the compounds were performed with nuclear magnetic resonance (NMR) spectroscopy (1H NMR & 13C NMR), and % conversion of FAMEs was calculated from the 1H NMR spectra. The fatty acid profile was determined by GC-FID and GC-MS analysis. FT-IR spectroscopic analysis and thermogravimetric analysis (TGA) were performed to investigate the infrared absorption pattern of the compound and the volatility difference between Lesquerella fendleri biodiesel and oil under nitrogen atmosphere. Results indicate that this is a fast, green, energy-efficient, sustainable, and industrially applicable method for biodiesel production from LFO.
| S-EPMC9256648 | biostudies-literature
Project description:A number of samples from solid food waste oil (SFWO) from different restaurants have been collected. Data regarding fatty acid profile, acid value, water content and kinematic viscosity were used for characterization purposes. Response surface methodology data has been used to carry out conventional transesterification optimization. The quality of the final product has been checked following the European biodiesel standard EN14214. To compare conventional and ultrasound-assisted transesterification results, energy consumption and reaction time data have been gathered. More information and result interpretation may be found in "Optimization of solid food waste oil biodiesel by ultrasound assisted transesterification" [1].
| S-EPMC7154990 | biostudies-literature
Project description:BACKGROUND:Microalgae have been proposed as potential platform to produce lipid-derived products, such as biofuels. Knowledge on the intracellular carbon flow distribution may identify key metabolic processes during lipid synthesis thus refining culture/genetic strategies to maximize cell lipid productivity. A kinetic metabolic model simulating cell metabolic behavior and lipid production was first applied in the microalgae platform Chlorella protothecoides under heterotrophic condition. It combines both physiology and flux information in a kinetic approach. Cell nutrition, growth, lipid production and almost 30 metabolic intermediates covering central carbon metabolism were included and simulated. RESULTS:Model simulations were shown to adequately agree with experimental data, which is suggesting that the proposed model copes with Chlorella protothecoides cells' biology. The dynamic metabolic flux analysis using the model showed a reversible starch flux from accumulation to decomposing when glucose reached depletion, while net lipid flux shows a quasi-constant rate. The sensitive flux parameters on starch and lipid metabolism suggested that starch synthesis is the major competing pathway that affects lipid accumulation in C. protothecoides. Flux analysis also demonstrated that high lipid yield under heterotrophic condition is accompanied with high lipid flux and low TCA activity. Meanwhile, the dynamic flux distribution also suggests a relatively constant ratio of glucose distributed to biomass, lipid, starch, nucleotides as well as pentose phosphate pathway. CONCLUSION:The model described not only experimental data, but also unraveled intracellular carbon flow distribution and identify key metabolic processes during lipid synthesis. Most of the metabolic kinetics also showed statistical significance for metabolic mechanism. Therefore, this study unravels the mechanisms of the glucose impact on the dynamic carbon flux distribution, thus improving our understanding of the links between carbon fluxes and lipid metabolism in C. protothecoides.
| S-EPMC6598345 | biostudies-literature
Project description:BACKGROUND: Microalgae-derived biodiesel is a promising substitute for conventional fossil fuels. In particular, the green alga Chlorella protothecoides sp. 0710 is regarded as one of the best candidates for commercial manufacture of microalgae-derived biofuel. This is due not only to its ability to live autotrophically through photosynthesis, but also to its capacity to produce a large amount of biomass and lipid through fermentation of glucose. However, until the present study, neither its genome sequence nor the platform required for molecular manipulations were available. RESULTS: We generated a draft genome for C. protothecoides, and compared its genome size and gene content with that of Chlorella variabilis NC64A and Coccomyxa subellipsoidea C-169. This comparison revealed that C. protothecoides has a reduced genome size of 22.9 Mbp, about half that of its close relatives. The C. protothecoides genome encodes a smaller number of genes, fewer multi-copy genes, fewer unique genes, and fewer genome rearrangements compared with its close relatives. In addition, three Chlorella-specific hexose-proton symporter (HUP)-like genes were identified that enable the consumption of glucose and, consequently, heterotrophic growth. Furthermore, through comparative transcriptomic and proteomic studies, we generated a global perspective regarding the changes in metabolic pathways under autotrophic and heterotrophic growth conditions. Under heterotrophic conditions, enzymes involved in photosynthesis and CO2 fixation were almost completely degraded, either as mRNAs or as proteins. Meanwhile, the cells were not only capable of quickly assimilating glucose but also showed accelerated glucose catabolism through the upregulation of glycolysis and the tricarboxylic acid (TCA) cycle. Moreover, the rapid synthesis of pyruvate, upregulation of most enzymes involved in fatty acid synthesis, and downregulation of enzymes involved in fatty acid degradation favor the synthesis of fatty acids within the cell. CONCLUSIONS: Despite similarities to other Chlorella, C. protothecoides has a smaller genome than its close relatives. Genes involved in glucose utilization were identified, and these genes explained its ability to grow heterotrophically. Transcriptomic and proteomic results provided insight into its extraordinary ability to accumulate large amounts of lipid. The C. protothecoides draft genome will promote the use of this species as a research model.
| S-EPMC4111847 | biostudies-literature
Project description:Biodiesel, which was earlier used only as an alternative fuel, is now an indispensable component of commercial diesel. Conventional production processes are unable to cope with the increasing demand for biodiesel, and therefore more and more work is being done to intensify the existing processes. The intensification of the biodiesel production process, taking into account the environmental and economic factors, is based on increasing productivity. One way to achieve that is by reducing the volume of production units. The application of the enzymatic reaction path, while reducing the volume of process equipment to the micro-level, has significantly magnified the productivity of the biodiesel production process, which is primarily due to better mass transfer in microsystems. Additional breakthrough is the use of deep eutectic solvents (DES) instead of buffers for enzyme stabilization. In this study, a lipase from Thermomyces lanuginosus (TlL) (both commercial and produced by solid-state fermentation) was used as a catalyst for biodiesel production. Edible and waste sunflower oil, as well as methanol, were used as substrates. The reaction mediums were buffer and DES. The transesterification reaction was carried out in a batch reactor and the emphasis was made on different microreactor configurations. The highest yield of 32% for residence time of only ? = 30 min was obtained in the microreactor system with an emulsion of waste oil and a commercial enzyme suspended in a buffer. This indicates that enzymatic transesterification could be a valuable reaction path for dealing with waste oils. Furthermore, biodiesel synthesis in DES showed somewhat lower yields, but by increasing the water content in the system, the reaction could prove much better results. In the end, the effects of reaction conditions on the volumetric productivity of the process were analyzed.
| S-EPMC7281739 | biostudies-literature
Project description:Lipase-catalyzed ethanolysis of triolein was studied as a model for biodiesel production. Four lipases were immobilized on porous polypropylene, and ethanolysis reactions were carried out in methyl t-butyl ether. The reaction products were analyzed using gas chromatography. Three of the four lipases studied were efficient in the conversion of triolein to 2-monoolein, but slow in the final step of producing glycerol. However, Candida antarctica lipase B was slow in the conversion of triolein, but more efficient in the subsequent two steps than the other lipases. The 1,3-selectivity of the lipases was less pronounced for the monooleins than for triolein. Silica gel was investigated as a catalyst for acyl migration, showing an increase in biodiesel yield with three of the lipases, but a reduction in yield when C. antarctica lipase B was used. The highest biodiesel yield (96 %) was obtained with a combination of Rhizopus arrhizus lipase and C. antarctica lipase B.
| S-EPMC4070466 | biostudies-literature
Project description:The optimum conditions to produce palm fatty acid distillate (PFAD)-derived-methyl esters via esterification have been demonstrated with the aid of the response surface methodology (RSM) with central composite rotatable design in the presence of heterogeneous acid catalyst. The effect of four reaction variables, reaction time (30-110 min), reaction temperature (30-70°C), catalyst concentration (1-3 wt.%) and methanol : PFAD molar ratio (3 : 1-11 : 1), were investigated. The reaction time had the most influence on the yield response, while the interaction between the reaction time and the catalyst concentration, with an F-value of 95.61, contributed the most to the esterification reaction. The model had an R 2-value of 0.9855, suggesting a fit model, which gave a maximum yield of 95%. The fuel properties of produced PFAD methyl ester were appraised based on the acid value, iodine value, cloud and pour points, flash point, kinematic viscosity, density, ash and water contents and were compared with biodiesel EN 14214 and ASTM D-6751 standard limits. The PFAD methyl ester was further blended with petro-diesel from B0, B3, B5, B10, B20 and B100, on a volumetric basis. The blends were characterized by TGA, DTG and FTIR. With an acid value of 0.42 (mg KOH g-1), iodine value of 63 (g.I2/100 g), kinematic viscosity of 4.31 (mm2 s-1), the PFAD methyl ester has shown good fuel potential, as all of its fuel properties were within the permissible international standards for biodiesel.
| S-EPMC7029908 | biostudies-literature
Project description:In this investigation, we report the synthesis of biodiesel using benzimidazolium-based brønsted acid ionic liquid (BBAIL) catalyst under the influence of ultrasonication. The prepared BBAIL catalyst was characterized by Fourier transform infrared and NMR spectroscopy techniques, and its acidity was determined by the Hammett method with 4-nitroaniline as the indicator. Ultrasonicator horn (22 kHz, 500 W) was used in this work with an on-off cycle of 50-20 s at 70% amplitude. The highest biodiesel yield of 96% was achieved by ultrasonication when 1:10 molar ratio of castor oil to methyl alcohol was used at 50 °C temperature with 9 mol % of the catalyst in just 90 min, which is about 10 times lesser than the process without ultrasonication. At similar conditions, 96% biodiesel yield was obtained in 14 h without ultrasonication. In summary, ultrasonication proved to be an efficient way to improve biodiesel synthesis in less time and BBAIL showed excellent activity toward the conversion of glycerides to synthesize biodiesel. Other important highlights are easy separation of the catalyst and recyclability up to three cycles with small decrease in its activity.
| S-EPMC6643412 | biostudies-literature
Project description:White mustard (Sinapis alba L.) seed oil is used for cooking, food preservation, body and hair revitalization, biodiesel production, and as a diesel fuel additive and alternative biofuel. This review focuses on biodiesel production from white mustard seed oil as a feedstock. The review starts by outlining the botany and cultivation of white mustard plants, seed harvest, drying and storage, and seed oil composition and properties. This is followed by white mustard seed pretreatments (shelling, preheating, and grinding) and processing techniques for oil recovery (pressing, solvent extraction, and steam distillation) from whole seeds, ground seed or kernels, and press cake. Novel technologies, such as aqueous, enzyme-assisted aqueous, supercritical CO2, and ultrasound-assisted solvent extraction, are also discussed. The main part of the review considers biodiesel production from white mustard seed oil, including fuel properties and performance. The economic, environmental, social, and human health risk/toxicological impacts of white mustard-based biodiesel production and use are also discussed.
| S-EPMC7142246 | biostudies-literature