Functional, composite polythioether nanoparticles via thiol-alkyne photopolymerization in miniemulsion.
Ontology highlight
ABSTRACT:
SUBMITTER: Amato DN
PROVIDER: S-EPMC4857709 | biostudies-literature | 2015 Jul
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Spherical, individual polymer nanoparticles with functional -SH groups were synthesized via aerosol photopolymerization (APP) employing radically initiated thiol-ene chemistry. A series of various thiol and alkene monomer combinations were investigated based on di-, tri-, and tetrafunctional thiols with difunctional allyl and vinyl ethers, and di- and trifunctional acrylates. Only thiol and alkene monomer combinations able to build cross-linked poly(thio-ether) networks were compatible with APP, which requires fast polymerization of the generated droplet aerosol during the photoreactor passage within a residence time of half-minute. Higher monomer functionalities and equal overall stoichiometry of functional groups resulted in the best nanoparticles being spherical and individual, proven by scanning electron microscopy (SEM). The presence of reactive -SH groups in the synthesized nanoparticles as a basis for post-polymerization modifications was verified by Ellman's test.
| S-EPMC8704326 | biostudies-literature
Project description:A simple and modular synthetic approach, based on miniemulsion polymerization, has been developed for the fabrication of composite polymer-metal nanoparticle materials. The procedure produces well-defined composite structures consisting of gold, silver or MnFe(2)O(4) nanoparticles (∼10 nm in diameter) encapsulated within larger spherical nanoparticles of poly(divinylbenzene) (∼100 nm in diameter). This methodology readily permits the incorporation of multiple metal domains into a single polymeric particle, while still preserving the useful optical and magnetic properties of the metal nanoparticles. The morphology of the composite particles is retained upon increasing the inorganic content, and also upon redispersion in organic solvents. Finally, the ability to tailor the surface chemistry of the composite nanoparticles and incorporate steric stabilizing groups using simple thiol-ene chemistry is demonstrated.
| S-EPMC2908426 | biostudies-literature
Project description:Fabrication of superhydrophobic materials using incumbent techniques involves several processing steps and is therefore either quite complex, not scalable, or often both. Here, the development of superhydrophobic surface-patterned polymer-TiO2 composite materials using a simple, single-step photopolymerization-based approach is reported. The synergistic combination of concurrent, periodic bump-like pattern formation created using irradiation through a photomask and photopolymerization-induced nanoparticle (NP) phase separation enables the development of surface textures with dual-scale roughness (micrometer-sized bumps and NPs) that demonstrate high water contact angles, low roll-off angles, and desirable postprocessability such as flexibility, peel-and-stick capability, and self-cleaning capability. The effect of nanoparticle concentration on surface porosity and consequently nonwetting properties is discussed. Large-area fabrication over an area of 20 cm2, which is important for practical applications, is also demonstrated. This work demonstrates the capability of polymerizable systems to aid in the organization of functional polymer-nanoparticle surface structures.
| S-EPMC8438665 | biostudies-literature
Project description:Step-growth, radically mediated thiol-norbornene photopolymerization is used to create versatile, stimuli-responsive poly(ethylene glycol)-co-peptide hydrogels The reaction is cytocompatible and allows for the encapsulation of human mesenchymal stem cells with a viability greater than 95%. Cellular spreading is dictated via three-dimensional biochemical photopatterning.
| S-EPMC4226179 | biostudies-literature
Project description:Owing to its simple operation and minimal generation of pollutants, miniemulsion polymerization has attracted increasing interest in the field of inkjet printing. In this study, different dyes were encapsulated with styrene-co-butyl acrylate copolymers via miniemulsion polymerization. The encapsulated dye/polymer nanoparticles were spherical with an apparent shell-core structure, narrow size distributions, and good thermal stability. These nanoparticles were used as miniemulsion inks that could remain unchanged with good photostability for a long time. The miniemulsion ink was successfully applied to inkjet printing on paper with bright colors and good fluency, and the dyeing of cotton fabrics indicated that these nanoparticles possessed good rubbing and washing fastness. All of these results suggest that the miniemulsion ink is a potential substitute for inks based on traditional dyes in inkjet printing.
| S-EPMC6644689 | biostudies-literature
Project description:Strong, flexible, and transparent materials have garnered tremendous interest in recent years as materials and electronics manufacturers pursue devices that are bright, flexible, durable, tailorable, and lightweight. Depending on the starting components, polymers fabricated using thiol-yne chemistry have been shown to be exceptionally strong and/or flexible, while also being amenable to modification by the incorporation of nanoparticles. In the present work, novel ligands were synthesized and used to functionalize quantum dots (QDs) of various diameters. The functionalized QDs were then incorporated into thiol-yne prepolymer matrices. These matrices were subsequently polymerized to form QD thiol-yne nanocomposite polymers. To demonstrate the versatility of the fabrication process, the prepolymers were either thermally cured or photopolymerized. The resulting transparent nanocomposites expressed the size-specific color of the QDs within them when exposed to ultraviolet irradiation, demonstrating that QDs can be incorporated into thiol-yne polymers without significantly altering QD expression. With the inclusion of QDs, thiol-yne nanocomposite polymers are promising candidates for use in numerous applications including as device display materials, optical lens materials, and/or sensor materials.
| S-EPMC6641478 | biostudies-literature
Project description:Hybrid nanomaterials possess the properties of both organic and inorganic components and find applications in various fields of research and technology. In this study, aerosol photopolymerization is used in combination with thiol-ene chemistry to produce silver poly(thio-ether) hybrid nanospheres. In aerosol photopolymerization, a spray solution of monomers is atomized, forming a droplet aerosol, which then polymerizes, producing spherical polymer nanoparticles. To produce silver poly(thio-ether) hybrids, silver nanoparticles were introduced to the spray solution. Diverse methods of stabilization were used to produce stable dispersions of silver nanoparticles to prevent their agglomeration before the photopolymerization process. Successfully stabilized silver nanoparticle dispersion in the spray solution subsequently formed nanocomposites with non-agglomerated silver nanoparticles inside the polymer matrix. Nanocomposite particles were analyzed via scanning and transmission electron microscopy to study the degree of agglomeration of silver nanoparticles and their location inside the polymer spheres. The nanoparticle hybrids were then introduced onto various biofunctionalization reactions. A two-step bioconjugation process was developed involving the hybrid nanoparticles: (1) conjugation of (biotin)-maleimide to thiol-groups on the polymer network of the hybrids, and (2) biotin-streptavidin binding. The biofunctionalization with gold-nanoparticle-conjugates was carried out to confirm the reactivity of -SH groups on each conjugation step. Fluorescence-labeled biomolecules were conjugated to the spherical nanoparticle hybrids (applying the two-step bioconjugation process) verified by Fluorescence Spectroscopy and Fluorescence Microscopy. The presented research offers an effective method of synthesis of smart systems that can further be used in biosensors and various other biomedical applications.
| S-EPMC8838805 | biostudies-literature
Project description:Step-growth thiol-Michael photopolymerizable resins, constituting an alternative chemistry to the current methacrylate-based chain-growth polymerizations, were developed and evaluated for use as dental restorative materials. The beneficial features inherent to anion-mediated thiol-Michael polymerizations were explored, such as rapid photocuring, low stress generation, ester content tunability, and improved mechanical performance in a moist environment. An ester-free tetrafunctional thiol and a ultraviolet-sensitive photobase generator were implemented to facilitate thiol-Michael photopolymerization. Thiol-Michael resins of varied ester content were fabricated under suitable light activation. Polymerization kinetics and shrinkage stress were determined with Fourier-transform infrared spectroscopy coupled with tensometery measurements. Thermomechanical properties of new materials were evaluated by dynamic mechanical analysis and in 3-point bending stress-strain experiments. Photopolymerization kinetics, polymerization shrinkage stress, glass transition temperature, flexural modulus, flexural toughness, and water sorption/solubility were compared between different thiol-Michael systems and the BisGMA/TEGDMA control. Furthermore, the mechanical performance of 2 thiol-Michael composites and a control composite were compared before and after extensive conditioning in water. All photobase-catalyzed thiol-Michael polymerization matrices achieved >90% conversion with a dramatic reduction in shrinkage stress as compared with the unfilled dimethacrylate control. One prototype of ester-free thiol-Michael formulations had significantly better water uptake properties than the BisGMA/TEGDMA control system. Although exhibiting relatively lower Young's modulus and glass transition temperatures, highly uniform thiol-Michael materials achieved much higher toughness than the BisGMA/TEGDMA control. Moreover, low-ester thiol-Michael composite systems show stable mechanical performance even after extensive water treatment. Although further resin/curing methodology optimization is required, the photopolymerized thiol-Michael prototype resins can now be recognized as promising candidates for implementation in composite dental restorative materials.
| S-EPMC5958372 | biostudies-literature
Project description:Photobase generator (PBG)-mediated thiol⁻epoxy photopolymerization has received widedspread attention due to its versatility in various applications. Currently, nearly all reported PBGs release amines as active species. The formed amines induce odor, yellowing, and potential toxicity. In this study, a series of novel thioxanthone-based PBGs, which were able to generate carbanion via decarboxylation under LED light irradiation, were designed and straightforwardly prepared. The formed carbanion can be used as a superbase to catalyze thiol⁻epoxy polymerization efficiently. Investigation on ¹H NMR and FT-IR confirmed the generation of carbanion intermediates. The counteranion significantly affected the photodecarboxylation efficiency. The study of photopolymerization tests, based on real-time FT-IR and dielectric analysis measurements, indicated that the generated carbanion exhibited faster polymerization rate and higher epoxy conversion than traditional superbase 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU). In differential scanning calorimeter, thermogravimetric, and nanoindentation tests, comparable thermal and mechanical properties of the photocured films catalyzed by novel PBGs were obtained. The high initiation ability combined with straightforward synthesis makes these PBGs promising candidates for commercialization.
| S-EPMC6418981 | biostudies-literature
Project description:We herein report the development of crosslinked polyether particles as a reactive platform for the preparation of functional microgels. Thiol-ene crosslinking of poly(allyl glycidyl ether) in miniemulsion droplets - stabilized by a surface active, bio-compatible polyethylene glycol block copolymer - resulted in colloidal gels with a PEG corona and an inner polymeric network containing reactive allyl units. The stability of the allyl groups allows the microgels to be purified and stored before a second, subsequent thiol-ene functionalization step allows a wide variety of pH- and chemically-responsive groups to be introduced into the nanoparticles. The facile nature of this synthetic platform enables the preparation of microgel libraries that are responsive to different triggers but are characterized by the same size distribution, surface functionality, and crosslinking density. In addition, the utilization of a crosslinker containing cleavable ester groups renders the resulting hydrogel particles degradable at elevated pH or in the presence of esterase under physiological conditions.
| S-EPMC4437636 | biostudies-literature