Dataset Information

Three dimensional tracking of exploratory behavior of barnacle cyprids using stereoscopy.

ABSTRACT: Surface exploration is a key step in the colonization of surfaces by sessile marine biofoulers. As many biofouling organisms can delay settlement until a suitable surface is encountered, colonization can comprise surface exploration and intermittent swimming. As such, the process is best followed in three dimensions. Here we present a low-cost transportable stereoscopic system consisting of two consumer camcorders. We apply this novel apparatus to behavioral analysis of barnacle larvae (?800 ?m length) during surface exploration and extract and analyze the three-dimensional patterns of movement. The resolution of the system and the accuracy of position determination are characterized. As a first practical result, three-dimensional swimming trajectories of the cypris larva of the barnacle Semibalanus balanoides are recorded in the vicinity of a glass surface and close to PEG2000-OH and C(11)NMe(3)(+)Cl(-) terminated self-assembled monolayers. Although less frequently used in biofouling experiments due to its short reproductive season, the selected model species [Marechal and Hellio (2011), Int Biodeterior Biodegrad, 65(1):92-101] has been used following a number of recent investigations on the settlement behavior on chemically different surfaces [Aldred et al. (2011), ACS Appl Mater Interfaces, 3(6):2085-2091]. Experiments were scheduled to match the availability of cyprids off the north east coast of England so that natural material could be used. In order to demonstrate the biological applicability of the system, analysis of parameters such as swimming direction, swimming velocity and swimming angle are performed.

SUBMITTER: Maleschlijski S

PROVIDER: S-EPMC4875145 | biostudies-literature | 2012 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Three dimensional tracking of exploratory behavior of barnacle cyprids using stereoscopy.

Maleschlijski S S Sendra G H GH Di Fino A A Leal-Taixé L L Thome I I Terfort A A Aldred N N Grunze M M Clare A S AS Rosenhahn B B Rosenhahn A A

Biointerphases 20120821 1-4

Surface exploration is a key step in the colonization of surfaces by sessile marine biofoulers. As many biofouling organisms can delay settlement until a suitable surface is encountered, colonization can comprise surface exploration and intermittent swimming. As such, the process is best followed in three dimensions. Here we present a low-cost transportable stereoscopic system consisting of two consumer camcorders. We apply this novel apparatus to behavioral analysis of barnacle larvae (≈800 μm ...[more]

PMID: 22907265

Similar Datasets

Project description:Abundance, species diversity, and horizontal distributions of barnacle cyprids offshore of La Jolla, southern California were described from May 2014 to August 2016 to determine how the nearshore barnacle larval assemblage changed before, during, and after the 2015-16 El Niño. The entire water column was sampled at five stations located within one km of shore with water depths of 4, 6, 8, 10, and 12 m during 33 cruises that encompassed the time when El Niño conditions impacted the area. Nearshore temperature and thermal stratification was concurrently measured using a CTD. Six identified cyprid species, including Chthamalus fissus, Pollicipes polymerus, Megabalanus rosa, Tetraclita rubescens, Balanus glandula, and B. trigonus, along with four unknown species, were collected in our samples. DNA barcoding was used to confirm identifications in a subset of the larvae. C. fissus was more than eight times more abundant than any other species, and while abundance varied by species, cyprid density was highest for all species except for M. rosa before and after the El Niño event, and lower during the environmental disturbance. There were significant differences in cross-shore distributions among cyprid species, with some located farther offshore than others, along with variability in cross-shore distributions by season. C. fissus cyprids were closest to shore during spring-summer cruises when waters were the most thermally stratified, which supports previous findings that C. fissus cyprids are constrained nearshore when thermal stratification is high. Relative species proportions varied throughout the study, but there was no obvious change in species assemblage or richness associated with El Niño. We speculate that barnacle cyprid species diversity did not increase at our study site during the 2015-16 El Niño, as it has in other areas during previous El Niño Southern Oscillation events, due to the lack of anomalous northward flow throughout the 2015-16 event.

Project description:Scanning beam digital x-ray (SBDX) is an inverse geometry fluoroscopic system with high dose efficiency and the ability to perform continuous real-time tomosynthesis at multiple planes. This study describes a tomosynthesis-based method for 3D tracking of high-contrast objects and present the first experimental investigation of cardiac catheter tracking using a prototype SBDX system.The 3D tracking algorithm utilizes the stack of regularly spaced tomosynthetic planes that are generated by SBDX after each frame period (15 frames/s). Gradient-filtered versions of the image planes are generated, the filtered images are segmented into object regions, and then a 3D coordinate is calculated for each object region. Two phantom studies of tracking performance were conducted. In the first study, an ablation catheter in a chest phantom was imaged as it was pulled along a 3D trajectory defined by a catheter sheath (10, 25, and 50 mm/s pullback speeds). SBDX tip tracking coordinates were compared to the 3D trajectory of the sheath as determined from a CT scan of the phantom after the registration of the SBDX and CT coordinate systems. In the second study, frame-to-frame tracking precision was measured for six different catheter configurations as a function of image noise level (662-7625 photons/mm2 mean detected x-ray fluence at isocenter).During catheter pullbacks, the 3D distance between the tracked catheter tip and the sheath centerline was 1.0 +/- 0.8 mm (mean +/- one standard deviation). The electrode to centerline distances were comparable to the diameter of the catheter tip (2.3 mm), the confining sheath (4 mm outside diameter), and the estimated SBDX-to-CT registration error (+/- 0.7 mm). The tip position was localized for all 332 image frames analyzed and 83% of tracked positions were inside the 3D sheath volume derived from CT. The pullback speeds derived from the catheter trajectories were within 5% of the programed pullback speeds. The tracking precision of ablation and diagnostic catheter tips ranged from +/- 0.2 mm at the highest image fluence to +/- 0.9 mm at the lowest fluence. Tracking precision depended on image fluence, the size of the tracked catheter electrode, and the contrast of the electrode.High speed multiplanar tomosynthesis with an inverse geometry x-ray fluoroscopy system enables 3D tracking of multiple high-contrast objects at the rate of fluoroscopic imaging. The SBDX system is capable of tracking electrodes in standard cardiac catheters with approximately 1 mm accuracy and precision.

Project description:The ability to monitor tumor motion without implanted markers can potentially enable broad access to more accurate and precise lung radiotherapy. A major challenge is that kilovoltage (kV) imaging based methods are rarely able to continuously track the tumor due to the inferior tumor visibility on 2D kV images. Another challenge is the estimation of 3D tumor position based on only 2D imaging information. The aim of this work is to address both challenges by proposing a Bayesian approach for markerless tumor tracking for the first time. The proposed approach adopts the framework of the extended Kalman filter, which combines a prediction and measurement steps to make the optimal tumor position update. For each imaging frame, the tumor position is first predicted by a respiratory-correlated model. The 2D tumor position on the kV image is then measured by template matching. Finally, the prediction and 2D measurement are combined based on the 3D distribution of tumor positions in the past 10?s and the estimated uncertainty of template matching. To investigate the clinical feasibility of the proposed method, a total of 13 lung cancer patient datasets were used for retrospective validation, including 11 cone-beam CT scan pairs and two stereotactic ablative body radiotherapy cases. The ground truths for tumor motion were generated from the the 3D trajectories of implanted markers or beacons. The mean, standard deviation, and 95th percentile of the 3D tracking error were found to range from 1.6-2.9?mm, 0.6-1.5?mm, and 2.6-5.8?mm, respectively. Markerless tumor tracking always resulted in smaller errors compared to the standard of care. The improvement was the most pronounced in the superior-inferior (SI) direction, with up to 9.5?mm reduction in the 95th-percentile SI error for patients with??>10?mm 5th-to-95th percentile SI tumor motion. The percentage of errors with 3D magnitude??<5?mm was 96.5% for markerless tumor tracking and 84.1% for the standard of care. The feasibility of 3D markerless tumor tracking has been demonstrated on realistic clinical scenarios for the first time. The clinical implementation of the proposed method will enable more accurate and precise lung radiotherapy using existing hardware and workflow. Future work is focused on the clinical and real-time implementation of this method.

Dataset Information

Three dimensional tracking of exploratory behavior of barnacle cyprids using stereoscopy.

Publications

Three dimensional tracking of exploratory behavior of barnacle cyprids using stereoscopy.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets