Enthalpies of Formation of (Cu,Ni)3Sn, (Cu,Ni)6Sn5-HT and (Ni,Cu)3Sn2-HT.
Ontology highlight
ABSTRACT:
SUBMITTER: Schmetterer C
PROVIDER: S-EPMC4894260 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Miniaturization of electronic devices has led to the development of 3D IC packages which require ultra-small-scale interconnections. Such small interconnects can be completely converted into Cu-Sn based intermetallic compounds (IMCs) after reflow. In an effort to improve IMC based interconnects, an attempt is made to add Ni to Cu-Sn-based IMCs. Multilayer interconnects consisting of stacks of Cu/Sn/Cu/Sn/Cu or Cu/Ni/Sn/Ni/Sn/Cu/Ni/Sn/Ni/Cu with Ni = 35 nm, 70 nm, and 150 nm were electrodeposited sequentially using copper pyrophosphate, tin methanesulfonic, and nickel Watts baths, respectively. These multilayer interconnects were investigated under room temperature aging conditions and for solid-liquid reactions, where the samples were subjected to 250 °C reflow for 60 s and also 300 °C for 3600 s. The progress of the reaction in the multilayers was monitored by using X-ray Diffraction, Scanning Electron Microscope, and Energy dispersive X-ray Spectroscopy. FIB-milled samples were also prepared for investigation under room temperature aging conditions. Results show that by inserting a 70 nanometres thick Ni layer between copper and tin, premature reaction between Cu and Sn at room temperature can be avoided. During short reflow, the addition of Ni suppresses formation of Cu₃Sn IMC. With increasing Ni thickness, Cu consumption is decreased and Ni starts acting as a barrier layer. On the other hand, during long reflow, two types of IMC were found in the Cu/Ni/Sn samples which are the (Cu,Ni)₆Sn₅ and (Cu,Ni)₃Sn, respectively. Details of the reaction sequence and mechanisms are discussed.
| S-EPMC5456830 | biostudies-other
Project description:We demonstrate copper-based (Cu,M)(O,S) oxysulfide catalysts with M = Ni, Sn, and Co for the abiotic chemical synthesis of ethanol (EtOH) with the C-C bond formation by passing carbon dioxide (CO2) through an aqueous dispersion bath at ambient environment. (Cu,Ni)(O,S) with 12.1% anion vacancies had the best EtOH yield, followed by (Cu,Sn)(O,S) and (Cu,Co)(O,S). The ethanol yield with 0.2 g (Cu,Ni)(O,S) catalyst over a span of 20 h achieved 5.2 mg. The ethanol yield is inversely proportional to the amount of anion vacancy. The kinetic mechanism for converting the dissolved CO2 into the C2 oxygenate is proposed. Molecular interaction, pinning, and bond weakening with anion vacancy of highly strained catalyst, the electron hopping at Cu+/Cu2+ sites, and the reaction orientation of hydrocarbon intermediates are the three critical issues in order to make the ambient chemical conversion of inorganic CO2 to organic EtOH with the C-C bond formation in water realized. On the other hand, Cu(O,S) with the highest amount of 22.7% anion vacancies did not produce ethanol due to its strain energy relaxation opposing to the pinning and weakening of O-H and C-O bonds.
| S-EPMC5577111 | biostudies-literature
Project description:High-entropy alloys (HEAs) are promising materials for next-generation applications because of their mechanical properties, excellent high-temperature stability, and resistance against oxidation and corrosion. Although many researchers have investigated high-temperature HEA applications, few have considered low-temperature applications. Here we demonstrate an unprecedented intermetallic compound of (Fe, Cr, Co, Ni, Cu)Sn2 at the interface between Sn-3.0Ag-0.5Cu (SAC) solder and FeCoNiCrCu0.5 HEA substrate after reflow at 400 °C. Significantly suppressed growth of intermetallic compound without detachment from the substrate was observed during thermal aging at 150 °C for 150 h. Sn grains with an average grain size of at least 380 μm are observed. The results reveal a completely new application for the fields of Sn-Ag-Cu solder and HEA materials.
| S-EPMC6629638 | biostudies-literature
Project description:This work reports the synthesis of CuxSny alloy aerogels for electrochemical CO2 reduction catalysts. An in situ reduction and the subsequent freeze-drying process can successfully give CnxSny aerogels with tuneable Sn contents, and such aerogels are composed of three-dimensional architectures made from inter-connected fine nanoparticles with pores as the channels. Density functional theory (DFT) calculations show that the introduction of Sn in Cu aerogels inhibits H2 evolution reaction (HER) activity, while the accelerated CO desorption on the catalyst surface is found at the same time. The porous structure of aerogel also favors exposing more active sites. Counting these together, with the optimized composition of Cu95Sn5 aerogel, the high selectivity of CO can be achieved with a faradaic efficiency of over 90% in a wide potential range (-0.7 V to -1.0 V vs. RHE).
| S-EPMC9919718 | biostudies-literature
Project description:Synthesis of most tin-based bimetallic nanoparticles is a challenging task because of the differences in the redox potential and the melting point between both components. This article presents a co-reduction synthesis of monoclinic Ni3Sn4 nanoparticles. Varying time and temperature gives the possibility to control the size of the nanoparticles in the range of 4-12 nm. The products were characterized by X-ray diffraction, high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, and energy-dispersive X-ray spectroscopy measurements. Although the synthesis was conducted entirely oxygen free, the postsynthetic treatment undertaken under air leads to the formation of an amorphous oxide shell. The oxide shell consists of an outer tin-rich region and a nickel-rich region at the interface to the metallic Ni3Sn4 core. On the basis of the investigation of the particles at different stages of the synthesis, we propose a growth mechanism for the Ni3Sn4 nanocrystals. These results can be a guidepost for the synthesis of other tin-based bimetallic nanoparticles.
| S-EPMC6644210 | biostudies-literature
Project description:New NiSn(OH)6 hexahydroxide nanoparticles were synthesised through a co-precipitation method using various concentrations of Ni2+ and Sn4+ ions (e.g., 1:0, 0:1, 1:2, 1:1, and 2:1; namely, N, S, NS-3, NS-2, and NS-1) with an ammonia solution. The perovskite NiSn(OH)6 was confirmed from powder X-ray diffraction and molecule interactions due to different binding environments of Ni, Sn, O, and water molecules observed from an FT-IR analysis. An electronic transition was detected from tin (Sn 3d) and nickel (Ni 2p) to oxygen (O 2p) from UV-Vis/IR spectroscopy. Photo luminescence spectroscopy (PL) identified that the emission observed at 400-800 nm in the visible region was caused by oxygen vacancies due to various oxidation states of Ni and Sn metals. A spherical nanoparticle morphology was observed from FE-SEM; this was due to the combination of Ni2+ and Sn4+ increasing the size and porosity of the nanoparticle. The elemental (Ni and Sn) distribution and binding energy of the nanoparticle were confirmed by EDAX and XPS analyses. Among the prepared various nanoparticles, NS-2 showed a maximum specific capacitance of 607 Fg-1 at 1 Ag-1 and 56% capacitance retention (338 Fg-1 and 5 Ag-1), even when increasing the current density five times, and excellent cycle stability due to combining Ni2+ with Sn4+, which improved the ionic and electrical conductivity. EIS provided evidence for NS-2's low charge transfer resistance compared with other prepared samples. Moreover, the NS-2//AC (activated carbon) asymmetric supercapacitor exhibited the highest energy density and high-power density along with excellent cycle stability, making it the ideal material for real-time applications.
| S-EPMC10179963 | biostudies-literature
Project description:Ni and NiSn supported on zirconia (ZrO2) and on indium (In)-incorporated zirconia (InZrO2) catalysts were prepared by a wet chemical reduction route and tested for hydrogenation of CO2 to methanol in a fixed-bed isothermal flow reactor at 250 °C. The mono-metallic Ni (5%Ni/ZrO2) catalysts showed a very high selectivity for methane (99%) during CO2 hydrogenation. Introduction of Sn to this material with the following formulation 5Ni5Sn/ZrO2 (5% Ni-5% Sn/ZrO2) showed the rate of methanol formation to be 0.0417 μmol/(gcat·s) with 54% selectivity. Furthermore, the combination NiSn supported on InZrO2 (5Ni5Sn/10InZrO2) exhibited a rate of methanol formation 10 times higher than that on 5Ni/ZrO2 (0.1043 μmol/(gcat·s)) with 99% selectivity for methanol. All of these catalysts were characterized by X-ray diffraction, high-resolution transmission electron microscopy (HRTEM), scanning transmission electron microscopy (STEM), X-ray photoelectron spectroscopy, CO2-temperature-programmed desorption, and density functional theory (DFT) studies. Addition of Sn to Ni catalysts resulted in the formation of a NiSn alloy. The NiSn alloy particle size was kept in the range of 10-15 nm, which was evidenced by HRTEM study. DFT analysis was carried out to identify the surface composition as well as the structural location of each element on the surface in three compositions investigated, namely, Ni28Sn27, Ni18Sn37, and Ni37Sn18 bimetallic nanoclusters, and results were in agreement with the STEM and electron energy-loss spectroscopy results. Also, the introduction of "Sn" and "In" helped improve the reducibility of Ni oxide and the basic strength of catalysts. Considerable details of the catalytic and structural properties of the Ni, NiSn, and NiSnIn catalyst systems were elucidated. These observations were decisive for achieving a highly efficient formation rate of methanol via CO2 by the H2 reduction process with high methanol selectivity.
| S-EPMC6641425 | biostudies-literature
Project description:The design of multifunctional alloys with multiple chemical components requires controllable synthesis approaches. Physical vapor deposition techniques, which result in thin films (<1??m), have previously been demonstrated for micromechanical devices and metallic combinatorial libraries. However, this approach deviates from bulk-like properties due to the residual stress derived in thin films and is limited by total film thickness. Here, we report a route to obtain ternary Ni-Mn-Sn alloy thick films with controllable compositions and thicknesses by annealing electrochemically deposited multi-layer monatomic (Ni, Mn, Sn) films, deposited sequentially from separate aqueous deposition baths. We demonstrate (1) controllable compositions, with high degree of uniformity, (2) smooth films, and (3) high reproducibility between film transformation behavior. Our results demonstrate a positive correlation between alloy film thicknesses and grain sizes, as well as consistent bulk-like transformation behavior.
| S-EPMC6085326 | biostudies-literature
Project description:Copper-based coatings are known for their high antibacterial activity. In this study, nanocomposite Cu-Sn-TiO2 coatings were obtained by electrodeposition from an oxalic acid bath additionally containing 4 g/dm3 TiO2 with mechanical and ultrasonic agitation. Ultrasound treatment was performed at 26 kHz frequency and 32 W/dm3 power. The influence of agitation mode and the current load on the inclusion and distribution of the TiO2 phase in the Cu-Sn metallic matrix were evaluated. Results indicated that ultrasonic agitation decreases agglomeration of TiO2 particles and allows for the deposition of dense Cu-Sn-TiO2 nanocomposites. It is shown that nanocomposite Cu-Sn-TiO2 coatings formed by ultrasonic-assisted electrodeposition exhibit excellent antimicrobial properties against E. coli bacteria.
| S-EPMC8233381 | biostudies-literature
Project description:A ceria (CeO2) promoted Cu-Ni bimetallic catalyst supported on SiO2 (Cu-Ni/CeO2-SiO2) was prepared and evaluated for catalytic hydrodeoxygenation (HDO) of vanillin. Silica supported monometallic Cu and Ni catalysts and bimetallic Cu-Ni catalyst (Cu/SiO2, Ni/SiO2, and Cu-Ni/SiO2), without a ceria promoter, were also synthesized and tested for the same application. The highest conversion of vanillin was achieved with the Cu-Ni/CeO2-SiO2 catalyst. Vanillyl alcohol was the sole product in the initial 2 h, followed by the formation of 2-methoxy-4-methylphenol, which was observed. Characterization of the synthesized catalysts revealed the presence of overlapping crystalline phases of CuO, NiO, and CeO2 on the Cu-Ni/CeO2-SiO2 surface. We extended our study to find out the results of using CeO2 as the support of the Cu-Ni bimetallic catalyst (Cu-Ni/CeO2). Partial incorporation of Cu and Ni cations into the ceria lattice took place, leading to the decrease of specific surface area and a concomitant compromise in the conversion. In the case of the Cu-Ni/CeO2-SiO2 catalyst, the higher conversion was accredited to the facile formation of Cu+ active centers by the synergistic interaction between Ce+4/Ce+3 and Cu+2/Cu+ redox couples and the incorporation of oxygen vacancies on the catalyst surface.
| S-EPMC6648372 | biostudies-literature