Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Water impacting on superhydrophobic macrotextures.

ABSTRACT: It has been recently shown that the presence of macrotextures on superhydrophobic materials can markedly modify the dynamics of water impacting them, and in particular significantly reduce the contact time of bouncing drops, compared with what is observed on a flat surface. This finding constitutes a significant step in the maximization of water repellency, since it enables to minimize even further the contact between solid and liquid. It also opens a new axis of research on the design of super-structures to induce specific functions such as anti-freezing, liquid fragmentation and/or recomposition, guiding, trapping and so on. Here we show that the contact time of drops bouncing on a repellent macrotexture takes discrete values when varying the impact speed. This allows us to propose a quantitative analysis of the reduction of contact time and thus to understand how and why macrotextures can control the dynamical properties of bouncing drops.

SUBMITTER: Gauthier A

PROVIDER: S-EPMC4918367 | biostudies-literature | 2015 Aug

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Water impacting on superhydrophobic macrotextures.

Gauthier Anaïs A Symon Sean S Clanet Christophe C Quéré David D

Nature communications 20150811

It has been recently shown that the presence of macrotextures on superhydrophobic materials can markedly modify the dynamics of water impacting them, and in particular significantly reduce the contact time of bouncing drops, compared with what is observed on a flat surface. This finding constitutes a significant step in the maximization of water repellency, since it enables to minimize even further the contact between solid and liquid. It also opens a new axis of research on the design of super- ...[more]

PMID: 26259509

Similar Datasets

Penetration and ligament formation of viscoelastic droplets impacting on the superhydrophobic mesh.

Project description:Spraying occurs by the impact of water droplets on the superhydrophobic wire meshes by liquid penetration during the spreading and recoiling. We have shown that adding a small amount of high molecular weight polymer (PEO) alters the ligaments formation and stabilizes them due to its high elasticity. Consequently, it suppresses droplet spray during droplet spreading and recoiling (recoil penetration). In the wide range of the impact velocities, the penetrated ligaments retracted back to the mesh after reaching the maximum length and eventually merged with the droplet on the mesh. The empirical fitting shows that the ligament evolution follows the parallel spring-dashpot model of Kelvin-Voigt. The additive polymer also changes the recoil penetration mechanisms from cavity collapse to cavity detachment due to the higher retraction velocity of the cavity near the mesh that is induced by the upward flow formed by the retraction of the ligaments to the mother droplet. A model based on mass conservation is proposed to calculate the variation of the maximum ligament size.

| S-EPMC9278331 | biostudies-literature

Water droplet impact on elastic superhydrophobic surfaces.

Project description:Water droplet impact on surfaces is a ubiquitous phenomenon in nature and industry, where the time of contact between droplet and surface influences the transfer of mass, momentum and energy. To manipulate and reduce the contact time of impacting droplets, previous publications report tailoring of surface microstructures that influence the droplet - surface interface. Here we show that surface elasticity also affects droplet impact, where a droplet impacting an elastic superhydrophobic surface can lead to a two-fold reduction in contact time compared to equivalent rigid surfaces. Using high speed imaging, we investigated the impact dynamics on elastic nanostructured superhydrophobic substrates having membrane and cantilever designs with stiffness 0.5-7630 N/m. Upon impact, the droplet excites the substrate to oscillate, while during liquid retraction, the substrate imparts vertical momentum back to the droplet with a springboard effect, causing early droplet lift-off with reduced contact time. Through detailed experimental and theoretical analysis, we show that this novel springboarding phenomenon is achieved for a specific range of Weber numbers (We >40) and droplet Froude numbers during spreading (Fr >1). The observation of the substrate elasticity-mediated droplet springboard effect provides new insight into droplet impact physics.

| S-EPMC4962083 | biostudies-literature

Superhydrophobic Methylated Silica Sol for Effective Oil-Water Separation.

Project description:Superhydrophobic methylated silica with a core-shell structure was successfully fabricated by a sol-gel process. First, a pristine silica gel with an average particle size of ca. 110 nm was prepared, using tetraethylorthosilicate (TEOS) as a precursor, ethanol as a solvent, and NH4OH as a catalyst. Then, the superhydrophobic methylated silica sol was prepared by introducing methyltrimethoxysilane (MTMS), to graft the surface of the pristine silica gel with methyl groups. The structure and morphology of the methylated silica sol were characterized by Fourier transform infrared (FTIR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and transmission electron microscope (TEM). The characterization results showed that methyl groups were successfully grafted onto the surface of the pristine silica, and the diameter of the methylated silica was increased by 5-10 nm. Various superhydrophobic surfaces on glass, polyethylene terephthalate (PET) fabric, cotton, open-cell polyurethane (PU) foam, and polypropylene (PP) filter cloth were successfully constructed by coating the above substrates with the methylated silica sol and reached with a maximum static water contact angle and slide angle of 161° and 3°, respectively. In particular, the superhydrophobic PP filter cloth exhibited promising application in oil-water separation. The separation efficiency of different oil-water mixtures was higher than 96% and could be repeated at least 15 times.

| S-EPMC7078611 | biostudies-literature

Root hydraulic phenotypes impacting water uptake in drying soils.

Project description:Soil drying is a limiting factor for crop production worldwide. Yet, it is not clear how soil drying impacts water uptake across different soils, species, and root phenotypes. Here we ask (1) what root phenotypes improve the water use from drying soils? and (2) what root hydraulic properties impact water flow across the soil-plant continuum? The main objective is to propose a hydraulic framework to investigate the interplay between soil and root hydraulic properties on water uptake. We collected highly resolved data on transpiration, leaf and soil water potential across 11 crops and 10 contrasting soil textures. In drying soils, the drop in water potential at the soil-root interface resulted in a rapid decrease in soil hydraulic conductance, especially at higher transpiration rates. The analysis reveals that water uptake was limited by soil within a wide range of soil water potential (-6 to -1000 kPa), depending on both soil textures and root hydraulic phenotypes. We propose that a root phenotype with low root hydraulic conductance, long roots and/or long and dense root hairs postpones soil limitation in drying soils. The consequence of these root phenotypes on crop water use is discussed.

| S-EPMC9303794 | biostudies-literature

Efficient water scavenging by cooling superhydrophobic surfaces to obtain jumping water droplets from air.

Project description:Dew collection is significant in harvesting water and relieving water shortages in arid regions. However, current methods for collecting dew or steam are mainly focusing on the millimeter-sized droplets condensed on the superhydrophobic surfaces. Here, we present a concept for harvesting micro droplets that can spontaneously bounce on the cooling superhydrophobic aluminum surface with randomly micro-nano composite structures, which were fabricated by using a two-step surface structural process. Moreover, an integrated device has been developed, which consists of a triboelectric nanogenerator and the superhydrophobic aluminum sheet. We experimentally explained that the triboelectric nanogenerator, which provides an external electric field by converting wind energy to electric energy with DC voltage pulse peaks of about 60 V, can be utilized to enhance the collection capacity of the jumping water droplets.

| S-EPMC6760228 | biostudies-literature

Triboelectric Energy Harvesting of the Superhydrophobic Coating from Dropping Water.

Project description:In this paper, the superhydrophobic coating was prepared by spraying the composites of fluorocarbon emulsion and nanosized silica on the conductive glass sheet for the triboelectric energy harvesting from water droplets. The low surface energy of fluorine in the fluorocarbon emulsion and nanosilica renders the coating with the static contact angle and sliding angle of 156.2° and 6.74°, respectively. The conductive aluminum tape was attached on the surface of the superhydrophobic coating to complete the circuit constituted with the aluminum electrode, charged superhydrophobic coating, and the conductive glass sheet. During the contact electrification with the bouncing water droplet, the superhydrophobic coating with the aluminum electrode can obtain the electric energy with an open-circuit voltage of 20 V and short-circuit current of 4.5 μA, respectively. While the control device only produced an open-circuit voltage of 0.2 V. The generated power by one drop was enough to light up 16 commercial LEDs. Results demonstrate that the fluorocarbon/silica composite superhydrophobic coating is potentially a strong candidate for scavenging energy in sliding mode from raindrops.

| S-EPMC7565980 | biostudies-literature

Water droplet bouncing on a non-superhydrophobic Si nanospring array.

Project description:Self-cleaning surfaces often make use of superhydrophobic coatings that repel water. Here, we report a hydrophobic Si nanospring surface that effectively suppresses wetting by repelling water droplets. The dynamic response of Si nanospring arrays fabricated by glancing-angle deposition is investigated. These hydrophobic arrays of vertically standing nanosprings (about 250 nm high and 60 nm apart) allow the droplets to rebound within a few milliseconds after contact. Amazingly, the morphology of the nanostructures influences the impact dynamics. The rebound time and coefficient of restitution are higher for Si nanosprings than for vertical Si columns. By considering the droplet/nanospring surface as a coupled-spring system, we argue that the restoring force of the nanosprings may be responsible for the water-droplet rebound. The bouncing phenomena studied here are essential in the design of self-cleaning surfaces and are also of fundamental importance for the study of wetting behavior on nanostructures.

| S-EPMC9419300 | biostudies-literature

Femtosecond Laser Fabricated Elastomeric Superhydrophobic Surface with Stretching-Enhanced Water Repellency.

Project description:Highly stretchable and robust superhydrophobic surfaces have attracted tremendous interest due to their broad application prospects. In this work, silicone elastomers were chosen to fabricate superhydrophobic surfaces with femtosecond laser texturing method, and high stretchability and tunable adhesion of the superhydrophobic surfaces were demonstrated successfully. To our best knowledge, it is the first time flexible superhydrophobic surfaces with a bearable strain up to 400% are fabricated by simple laser ablation. The test also shows that the strain brings no decline of water repellency but an enhancement to the superhydrophobic surfaces. In addition, a stretching-induced transition from "petal" state to "lotus" state of the laser-textured surface was also demonstrated by non-loss transportation of liquid droplets. Our results manifest that femtosecond laser ablating silicone elastomer could be a promising way for fabricating superhydrophobic surface with distinct merits of high stretchability, tunable adhesion, robustness, and non-fluorination, which is potentially useful for microfluidics, biomedicine, and liquid repellent skin.

| S-EPMC6813406 | biostudies-literature

Path-programmable water droplet manipulations on an adhesion controlled superhydrophobic surface.

Project description:Here, we developed a novel and facile method to control the local water adhesion force of a thin and stretchable superhydrophobic polydimethylsiloxane (PDMS) substrate with micro-pillar arrays that allows the individual manipulation of droplet motions including moving, merging and mixing. When a vacuum pressure was applied below the PDMS substrate, a local dimple structure was formed and the water adhesion force of structure was significantly changed owing to the dynamically varied pillar density. With the help of the lowered water adhesion force and the slope angle of the formed dimple structure, the motion of individual water droplets could be precisely controlled, which facilitated the creation of a droplet-based microfluidic platform capable of a programmable manipulation of droplets. We showed that the platform could be used in newer and emerging microfluidic operations such as surface-enhanced Raman spectroscopy with extremely high sensing capability (10(-15) M) and in vitro small interfering RNA transfection with enhanced transfection efficiency of ~80%.

| S-EPMC4511949 | biostudies-literature

Air-water interface of submerged superhydrophobic surfaces imaged by atomic force microscopy.

Project description:Underwater air retention of superhydrophobic hierarchically structured surfaces is of increasing interest for technical applications. Persistent air layers (the Salvinia effect) are known from biological species, for example, the floating fern Salvinia or the backswimmer Notonecta. The use of this concept opens up new possibilities for biomimetic technical applications in the fields of drag reduction, antifouling, anticorrosion and under water sensing. Current knowledge regarding the shape of the air-water interface is insufficient, although it plays a crucial role with regards to stability in terms of diffusion and dynamic conditions. Optical methods for imaging the interface have been limited to the micrometer regime. In this work, we utilized a nondynamic and nondestructive atomic force microscopy (AFM) method to image the interface of submerged superhydrophobic structures with nanometer resolution. Up to now, only the interfaces of nanobubbles (acting almost like solids) have been characterized by AFM at these dimensions. In this study, we show for the first time that it is possible to image the air-water interface of submerged hierarchically structured (micro-pillars) surfaces by AFM in contact mode. By scanning with zero resulting force applied, we were able to determine the shape of the interface and thereby the depth of the water penetrating into the underlying structures. This approach is complemented by a second method: the interface was scanned with different applied force loads and the height for zero force was determined by linear regression. These methods open new possibilities for the investigation of air-retaining surfaces, specifically in terms of measuring contact area and in comparing different coatings, and thus will lead to the development of new applications.

| S-EPMC5564253 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data