Browse
Submit Data
Databases
API
Help

Dataset Information

17 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Penetration and ligament formation of viscoelastic droplets impacting on the superhydrophobic mesh.

ABSTRACT: Spraying occurs by the impact of water droplets on the superhydrophobic wire meshes by liquid penetration during the spreading and recoiling. We have shown that adding a small amount of high molecular weight polymer (PEO) alters the ligaments formation and stabilizes them due to its high elasticity. Consequently, it suppresses droplet spray during droplet spreading and recoiling (recoil penetration). In the wide range of the impact velocities, the penetrated ligaments retracted back to the mesh after reaching the maximum length and eventually merged with the droplet on the mesh. The empirical fitting shows that the ligament evolution follows the parallel spring-dashpot model of Kelvin-Voigt. The additive polymer also changes the recoil penetration mechanisms from cavity collapse to cavity detachment due to the higher retraction velocity of the cavity near the mesh that is induced by the upward flow formed by the retraction of the ligaments to the mother droplet. A model based on mass conservation is proposed to calculate the variation of the maximum ligament size.

SUBMITTER: Mehrizi AA

PROVIDER: S-EPMC9278331 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Water impacting on superhydrophobic macrotextures.

Project description:It has been recently shown that the presence of macrotextures on superhydrophobic materials can markedly modify the dynamics of water impacting them, and in particular significantly reduce the contact time of bouncing drops, compared with what is observed on a flat surface. This finding constitutes a significant step in the maximization of water repellency, since it enables to minimize even further the contact between solid and liquid. It also opens a new axis of research on the design of super-structures to induce specific functions such as anti-freezing, liquid fragmentation and/or recomposition, guiding, trapping and so on. Here we show that the contact time of drops bouncing on a repellent macrotexture takes discrete values when varying the impact speed. This allows us to propose a quantitative analysis of the reduction of contact time and thus to understand how and why macrotextures can control the dynamical properties of bouncing drops.

| S-EPMC4918367 | biostudies-literature

Droplets move over viscoelastic substrates by surfing a ridge.

Project description:Liquid drops on soft solids generate strong deformations below the contact line, resulting from a balance of capillary and elastic forces. The movement of these drops may cause strong, potentially singular dissipation in the soft solid. Here we show that a drop on a soft substrate moves by surfing a ridge: the initially flat solid surface is deformed into a sharp ridge whose orientation angle depends on the contact line velocity. We measure this angle for water on a silicone gel and develop a theory based on the substrate rheology. We quantitatively recover the dynamic contact angle and provide a mechanism for stick-slip motion when a drop is forced strongly: the contact line depins and slides down the wetting ridge, forming a new one after a transient. We anticipate that our theory will have implications in problems such as self-organization of cell tissues or the design of capillarity-based microrheometers.

| S-EPMC4532859 | biostudies-literature

Temperature-induced coalescence of colliding binary droplets on superhydrophobic surface.

Project description:This report investigates the impact of droplet temperature on the head-on collision of binary droplets on a superhydrophobic surface. Understanding droplet collision is critical to many fundamental processes and industrial applications. There are many factors, including collision speed, collision angle, and droplet composition, that influence the outcome of the collision between binary droplets. This work provides the first experimental study of the influence of droplet temperature on the collision of binary droplets. As the droplet temperature increases, the possibility increases for the two droplets to coalesce after collision. The findings in this study can be extended to collision of droplets under other conditions where control of the droplet temperature is feasible. Such findings will also be beneficial to applications that involve droplet collision, such as in ink-jet printing, steam turbines, engine ignition, and spraying cooling.

| S-EPMC3946014 | biostudies-other

Coalescence-Induced Jumping of Multiple Condensate Droplets on Hierarchical Superhydrophobic Surfaces.

Project description:Coalescence-induced jumping of condensate droplets from a superhydrophobic surface with hierarchical micro/nanoscale roughness is quantitatively characterized. Experimental observations show that the condensate droplet jumping is induced by coalescence of multiple droplets of different sizes, and that the coalesced droplet trajectories typically deviate from the surface normal. A depth-from-defocus image processing technique is developed to track the out-of-plane displacement of the jumping droplets, so as to accurately measure the droplet size and velocity. The results demonstrate that the highest jumping velocity is achieved when two droplets coalesce. The jumping velocity decreases gradually with an increase in the number of coalescing droplets, despite the greater potential surface energy released upon coalescence. A general theoretical model that accounts for viscous dissipation, surface adhesion, line tension, the initial droplet wetting states, and the number and sizes of the coalescing droplets is developed to explain the trends of droplet jumping velocity observed in the experiments.

| S-EPMC4698694 | biostudies-literature

Morphing and vectoring impacting droplets by means of wettability-engineered surfaces.

Project description:Driven by its importance in nature and technology, droplet impact on solid surfaces has been studied for decades. To date, research on control of droplet impact outcome has focused on optimizing pre-impact parameters, e.g., droplet size and velocity. Here we follow a different, post-impact, surface engineering approach yielding controlled vectoring and morphing of droplets during and after impact. Surfaces with patterned domains of extreme wettability (high or low) are fabricated and implemented for controlling the impact process during and even after rebound--a previously neglected aspect of impact studies on non-wetting surfaces. For non-rebound cases, droplets can be morphed from spheres to complex shapes--without unwanted loss of liquid. The procedure relies on competition between surface tension and fluid inertial forces, and harnesses the naturally occurring contact-line pinning mechanisms at sharp wettability changes to create viable dry regions in the spread liquid volume. Utilizing the same forces central to morphing, we demonstrate the ability to rebound orthogonally-impacting droplets with an additional non-orthogonal velocity component. We theoretically analyze this capability and derive a We(-.25) dependence of the lateral restitution coefficient. This study offers wettability-engineered surfaces as a new approach to manipulate impacting droplet microvolumes, with ramifications for surface microfluidics and fluid-assisted templating applications.

| S-EPMC4229684 | biostudies-literature

Dynamics of splashed droplets impacting wheat leaves treated with a fungicide.

Project description:Wheat is threatened by diseases such as leaf rust. One significant mechanism of disease spread is the liberation and dispersal of rust spores due to rainsplash. However, it is unclear to what extent the spore-laden splashed droplets can transmit the disease to neighbouring leaves. Here, we show that splashed droplets either bounce or stick, depending on the orientation of the leaf and whether the surface of the leaf has been treated with a fungicide. A scaling model revealed that bouncing was enabled when the droplet's kinetic energy exceeded its pinning energy to the surface. Our findings indicate that, ironically, the application of fungicide to protect a wheat plant may also facilitate pathogen spread and infection by making leaves sticky to spore-laden droplets.

| S-EPMC7423427 | biostudies-literature

Super-Efficient Synthesis of Mesh-like Superhydrophobic Nano-Aluminum/Iron (III) Oxide Energetic Films.

Project description:In this study, a novel superhydrophobic nano-aluminum/iron (III) oxide composite has been prepared by a facile one-step process of electrophoretic deposition, with wide potential applications. The optimal suspension included ethanol, acetyl-acetone, and the additives of fluorotriphenylsilane and perfluorodecyltriethoxysilane. The microstructure, wettability, and exothermic performance were analyzed by field emission scanning electron microcopy (FESEM), X-ray diffraction (XRD), water contact angle measurements, and the differential scanning calorimetry (DSC) technique. The water contact angle and the heat-release of the target composites could reach to ~170° and 2.67 kJ/g, and could still keep stable, after exposure for six months, showing a great stability. These results provided an exquisite synthesis of ideas, for designing other superhydrophobic energetic materials with self-cleaning properties, for real industrial application.

| S-EPMC6356539 | biostudies-literature

Counter-intuitive penetration of droplets into hydrophobic gaps in theory and experiment.

Project description:Droplets that spontaneously penetrate a gap between two hydrophobic surfaces without any external stimulus seems counterintuitive. However, in this work we show that it can be energetically favorable for a droplet to penetrate a gap formed by two hydrophobic or in some cases even superhydrophobic surfaces. For this purpose, we derived an analytical equation to calculate the change in Helmholtz free energy of a droplet penetrating a hydrophobic gap. The derived equation solely depends on the gap width, the droplet volume and the contact angle on the gap walls, and predicts whether a droplet penetrates a hydrophobic gap or not. Additionally, numerical simulations were conducted to provide insights into the gradual change in Helmholtz free energy during the process of penetration and to validate the analytical approach. A series of experiments with a hydrophobic gap having an advancing contact angle of [Formula: see text], a droplet volume of about 10 [Formula: see text]L and different gap widths confirmed the theoretical predictions. Limits and possible deviations between the analytical solution, the simulation and the experiments are presented and discussed.

| S-EPMC10545836 | biostudies-literature

From Initial Nucleation to Cassie-Baxter State of Condensed Droplets on Nanotextured Superhydrophobic Surfaces.

Project description:Understanding how droplet condensation happens plays an essential role for our fundamental insights of wetting behaviors in nature and numerous applications. Since there is a lack of study of the initial formation and growing processes of condensed droplets down to nano-/submicroscale, relevant underlying mechanisms remain to be explored. We report an in situ observation of vapor condensation on nano-/microtextured superhydrophobic surfaces using optical microscopy. An interesting picture of the vapor condensation, from the initial appearance of individual small droplets (≤1 μm) to a Cassie-Baxter wetting state (>30 μm), are exhibited. It is found that individual droplets preferentially nucleate at the top and the edge of single micropillars with very high apparent contact angles on the nanotextures. Scenarios of two distinguished growing modes are reported statistically and the underlying mechanisms are discussed in the view of thermodynamics. We particularly reveal that the formation of the Cassie-Baxter wetting state is a result of a continuous coalescence of individual small droplets, in which the nanotexture-enhanced superhydrophobicity plays a crucial role. We envision that these fundamental findings can deepen our understanding of the nucleation and development of condensed droplets in nanoscale, so as to optimize design strategies of superhydrophobic materials for a broad range of water-harvesting and heat-transfer systems.

| S-EPMC5311920 | biostudies-literature

Efficient water scavenging by cooling superhydrophobic surfaces to obtain jumping water droplets from air.

Project description:Dew collection is significant in harvesting water and relieving water shortages in arid regions. However, current methods for collecting dew or steam are mainly focusing on the millimeter-sized droplets condensed on the superhydrophobic surfaces. Here, we present a concept for harvesting micro droplets that can spontaneously bounce on the cooling superhydrophobic aluminum surface with randomly micro-nano composite structures, which were fabricated by using a two-step surface structural process. Moreover, an integrated device has been developed, which consists of a triboelectric nanogenerator and the superhydrophobic aluminum sheet. We experimentally explained that the triboelectric nanogenerator, which provides an external electric field by converting wind energy to electric energy with DC voltage pulse peaks of about 60 V, can be utilized to enhance the collection capacity of the jumping water droplets.

| S-EPMC6760228 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data