Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Solvent-Mediated Control of the Electrochemical Discharge Products of Non-Aqueous Sodium-Oxygen Electrochemistry.

ABSTRACT: The reduction of dioxygen in the presence of sodium cations can be tuned to give either sodium superoxide or sodium peroxide discharge products at the electrode surface. Control of the mechanistic direction of these processes may enhance the ability to tailor the energy density of sodium-oxygen batteries (NaO2 : 1071?Wh?kg(-1) and Na2 O2 : 1505?Wh?kg(-1) ). Through spectroelectrochemical analysis of a range of non-aqueous solvents, we describe the dependence of these processes on the electrolyte solvent and subsequent interactions formed between Na(+) and O2 (-) . The solvents ability to form and remove [Na(+) -O2 (-) ]ads based on Gutmann donor number influences the final discharge product and mechanism of the cell. Utilizing surface-enhanced Raman spectroscopy and electrochemical techniques, we demonstrate an analysis of the response of Na-O2 cell chemistry with sulfoxide, amide, ether, and nitrile electrolyte solvents.

SUBMITTER: Aldous IM

PROVIDER: S-EPMC4999043 | biostudies-literature | 2016 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Solvent-Mediated Control of the Electrochemical Discharge Products of Non-Aqueous Sodium-Oxygen Electrochemistry.

Aldous Iain M IM Hardwick Laurence J LJ

Angewandte Chemie (International ed. in English) 20160530 29

The reduction of dioxygen in the presence of sodium cations can be tuned to give either sodium superoxide or sodium peroxide discharge products at the electrode surface. Control of the mechanistic direction of these processes may enhance the ability to tailor the energy density of sodium-oxygen batteries (NaO2 : 1071 Wh kg(-1) and Na2 O2 : 1505 Wh kg(-1) ). Through spectroelectrochemical analysis of a range of non-aqueous solvents, we describe the dependence of these processes on the electrolyte ...[more]

PMID: 27240015

Similar Datasets

Visualizing Current-Dependent Morphology and Distribution of Discharge Products in Sodium-Oxygen Battery Cathodes.

Project description:Synchrotron X-ray tomography and scanning electron microscopy were applied to elucidate the spatial distribution of discharge product (NaO2) in the carbon cathode of sodium-oxygen batteries. Various batteries were discharged galvanostatically and their cathodes were analyzed. We observe a particle density gradient along the cathode that scales with the current density applied. Besides, we show that the particle size and shape of discharge product strongly depend on current density, and on whether the particles are deposited close to the oxygen reservoir or near the separator. We correlate our findings to transport limitations for the supplied oxygen and gain crucial information for optimal operation of sodium-oxygen batteries. Our findings imply that for low current densities pore clogging might occur, and that for elevated current densities small high surface area particles with limited electric conductivity form; both phenomena can decrease the available discharge and charge capacity significantly.

| S-EPMC4828675 | biostudies-literature

Solvent Effects in Halogen and Hydrogen Bonding Mediated Electrochemical Anion Sensing in Aqueous Solution and at Interfaces.

Project description:Sensing anionic species in competitive aqueous media is a well-recognised challenge to long-term applications across a multitude of fields. Herein, we report a comprehensive investigation of the electrochemical anion sensing performance of novel halogen bonding (XB) and hydrogen bonding (HB) bis-ferrocene-(iodo)triazole receptors in solution and at self-assembled monolayers (SAMs), in a range of increasingly competitive aqueous organic solvent media (ACN/H2 O). In solution, the XB sensor notably outperforms the HB sensor, with substantial anion recognition induced cathodic voltammetric responses of the ferrocene/ferrocenium redox couple persisting even in highly competitive aqueous solvent media of 20 % water content. The response to halides, in particular, shows a markedly lower sensitivity to increasing water content associated with a unique halide selectivity at unprecedented levels of solvent polarity. The HB sensor, in contrast, generally displayed a preference towards oxoanions. A significant surface-enhancement effect was observed for both XB/HB receptive films in all solvent systems, whereby the HB sensor generally displayed larger responses towards oxoanions than its halogen bonding analogue.

| S-EPMC8360193 | biostudies-literature

SnCl2/TiCl3-mediated deoximation of oximes in an aqueous solvent.

Project description:A simple procedure for SnCl(2)/TiCl(3)-mediated deoximation of ketoximes in an aqueous solvent is reported. Under the conditions developed in this effort, various ketones and aldehydes are produced in good to excellent yields.

| S-EPMC6268544 | biostudies-literature

Design of aqueous redox-enhanced electrochemical capacitors with high specific energies and slow self-discharge.

Project description:Electrochemical double-layer capacitors exhibit high power and long cycle life but have low specific energy compared with batteries, limiting applications. Redox-enhanced capacitors increase specific energy by using redox-active electrolytes that are oxidized at the positive electrode and reduced at the negative electrode during charging. Here we report characteristics of several redox electrolytes to illustrate operational/self-discharge mechanisms and the design rules for high performance. We discover a methyl viologen (MV)/bromide electrolyte that delivers a high specific energy of ∼14 Wh kg(-1) based on the mass of electrodes and electrolyte, without the use of an ion-selective membrane separator. Substituting heptyl viologen for MV increases stability, with no degradation over 20,000 cycles. Self-discharge is low, due to adsorption of the redox couples in the charged state to the activated carbon, and comparable to cells with inert electrolyte. An electrochemical model reproduces experiments and predicts that 30-50 Wh kg(-1) is possible with optimization.

| S-EPMC4532795 | biostudies-literature

Redox control for electrochemical dechlorination of trichloroethylene in bicarbonate aqueous media.

Project description:The role of iron anode on electrochemical dechlorination of aqueous trichloroethylene (TCE) is evaluated using batch mixed-electrolyte experiments. A significantly higher dechlorination rate, up to 99%, is reported when iron anode and copper foam cathodes are used. In contrast to the oxygen-releasing inert anode, the cast iron anode generates ferrous species, which regulate the electrolyte to a reducing condition (low ORP value) and favor the reduction of TCE. The main products of TCE electrochemical reduction on copper foam cathode include ethene and ethane. The ratio of these two hydrocarbons gases varied with the electrolyte ORP condition and current density as more ethane gas generates at more reducing electrolyte condition and at higher current condition. A pseudofirst-order model is used to describe the degradation of TCE; the first-order rate constant (k) increases with the current applied but exhibits a negative relation with initial concentration. Depending on the current, electrolysis by iron anode causes a reduction in the ORP and an increase in the pH of the mixed electrolyte. Enhanced reaction rates in this investigation indicate that the electrochemical reduction using copper foam and iron anode may be a promising process for remediation of groundwater contaminated with chlorinated organic compounds.

| S-EPMC3150566 | biostudies-literature

Solvent-induced electrochemistry at an electrically asymmetric carbon Janus particle.

Project description:Chemical doping through heteroatom substitution is often used to control the Fermi level of semiconductor materials. Doping also occurs when surface adsorbed molecules modify the Fermi level of low dimensional materials such as carbon nanotubes. A gradient in dopant concentration, and hence the chemical potential, across such a material generates usable electrical current. This opens up the possibility of creating asymmetric catalytic particles capable of generating voltage from a surrounding solvent that imposes such a gradient, enabling electrochemical transformations. In this work, we report that symmetry-broken carbon particles comprised of high surface area single-walled carbon nanotube networks can effectively convert exothermic solvent adsorption into usable electrical potential, turning over electrochemical redox processes in situ with no external power supply. The results from ferrocene oxidation and the selective electro-oxidation of alcohols underscore the potential of solvent powered electrocatalytic particles to extend electrochemical transformation to various environments.

| S-EPMC8184849 | biostudies-literature

On the limitations in assessing stability of oxygen evolution catalysts using aqueous model electrochemical cells.

Project description:Recent research indicates a severe discrepancy between oxygen evolution reaction catalysts dissolution in aqueous model systems and membrane electrode assemblies. This questions the relevance of the widespread aqueous testing for real world application. In this study, we aim to determine the processes responsible for the dissolution discrepancy. Experimental parameters known to diverge in both systems are individually tested for their influence on dissolution of an Ir-based catalyst. Ir dissolution is studied in an aqueous model system, a scanning flow cell coupled to an inductively coupled plasma mass spectrometer. Real dissolution rates of the Ir OER catalyst in membrane electrode assemblies are measured with a specifically developed, dedicated setup. Overestimated acidity in the anode catalyst layer and stabilization over time in real devices are proposed as main contributors to the dissolution discrepancy. The results shown here lead to clear guidelines for anode electrocatalyst testing parameters to resemble realistic electrolyzer operating conditions.

| S-EPMC8044118 | biostudies-literature

High-performance aqueous sodium-ion battery using a hybrid electrolyte with a wide electrochemical stability window.

Project description:The practical application of aqueous sodium-ion batteries (ASIBs) is limited by the electrolysis of water, which results in a low working voltage and energy density of ASIBs. Here, a NaClO4-based acetonitrile/water hybrid electrolyte (NaClO4(H2O)2AN2.4) is applied to ASIBs for the first time, which effectively extends the electrochemical stability window (ESW) to 3.0 V and reduces the internal resistance of the battery. Based on this hybrid electrolyte, an ASIB full cell using carbon coated Na2.85K0.15V2(PO4)3 and NaTi2(PO4)3 as the cathode and anode materials, respectively, can afford a discharge capacity and energy density of 52 mA h g-1 and 51 W h kg-1, respectively, at a current density of 1 A g-1. The energy density of this battery exceeds almost all reported traditional ASIBs.

| S-EPMC9055268 | biostudies-literature

Aldehyde Hydrogenation by Pt/TiO2 Catalyst in Aqueous Phase: Synergistic Effect of Oxygen Vacancy and Solvent Water

Project description:The aldehyde hydrogenation for stabilizing and upgrading

| S-EPMC9875238 | biostudies-literature

Electrochemistry in Media of Exceptionally Low Polarity: Voltammetry with a Fluorous Solvent.

Project description:This work demonstrates the first cyclic voltammetry in a perfluorocarbon solvent without use of a cosolvent. The novel electrolyte tetrabutylammonium tetrakis[3,5-bis(perfluorohexyl)phenyl]borate (NBu(4)BArF(104); 80 mM) allows for voltammetry of ferrocene in perfluoro(methylcyclohexane) by lowering the specific resistance to Ω268 k cm at 20.8 °C. Despite significant solution resistance, the resulting voltammograms can be fitted quantitatively without difficulty. The thus determined standard electron transfer rate constant, k°, for the oxidation of ferrocene in perfluoro(methylcyclohexane) is somewhat smaller than for many solvents commonly used in electrochemistry, but can be explained readily as the result of the viscosity and size of the solvent using Marcus theory. Dielectric dispersion spectroscopy verifies that addition of NBu(4)BArF(104) does not significantly raise the overall polarity of the solution over that of neat perfluoro(methylcyclohexane).

| S-EPMC2832752 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data