A Tagless Indoor Localization System Based on Capacitive Sensing Technology.
Ontology highlight
ABSTRACT:
SUBMITTER: Ramezani Akhmareh A
PROVIDER: S-EPMC5038726 | biostudies-literature | 2016 Sep
REPOSITORIES: biostudies-literature
Publications
A Tagless Indoor Localization System Based on Capacitive Sensing Technology.
Ramezani Akhmareh Alireza A Lazarescu Mihai Teodor MT Bin Tariq Osama O Lavagno Luciano L
Sensors (Basel, Switzerland) 20160907 9
Accurate indoor person localization is essential for several services, such as assisted living. We introduce a tagless indoor person localization system based on capacitive sensing and localization algorithms that can determine the location with less than 0.2 m average error in a 3 m × 3 m room and has recall and precision better than 70%. We also discuss the effects of various noise types on the measurements and ways to reduce them using filters suitable for on-sensor implementation to lower co ...[more]
Similar Datasets
Project description:This paper proposes a novel multi-sensor-based indoor global localization system integrating visual localization aided by CNN-based image retrieval with a probabilistic localization approach. The global localization system consists of three parts: coarse place recognition, fine localization and re-localization from kidnapping. Coarse place recognition exploits a monocular camera to realize the initial localization based on image retrieval, in which off-the-shelf features extracted from a pre-trained Convolutional Neural Network (CNN) are adopted to determine the candidate locations of the robot. In the fine localization, a laser range finder is equipped to estimate the accurate pose of a mobile robot by means of an adaptive Monte Carlo localization, in which the candidate locations obtained by image retrieval are considered as seeds for initial random sampling. Additionally, to address the problem of robot kidnapping, we present a closed-loop localization mechanism to monitor the state of the robot in real time and make adaptive adjustments when the robot is kidnapped. The closed-loop mechanism effectively exploits the correlation of image sequences to realize the re-localization based on Long-Short Term Memory (LSTM) network. Extensive experiments were conducted and the results indicate that the proposed method not only exhibits great improvement on accuracy and speed, but also can recover from localization failures compared to two conventional localization methods.
| S-EPMC6359079 | biostudies-literature
Project description:Monitoring human movement is highly relevant in mobile health applications. Textile-based wearable solutions have the potential for continuous and unobtrusive monitoring. The precise estimation of joint angles is important in applications such as the prevention of osteoarthritis or in the assessment of the progress of physical rehabilitation. We propose a textile-based wearable device for knee angle estimation through capacitive sensors placed in different locations above the knee and in contact with the skin. We exploited this modality to enhance the baseline value of the capacitive sensors, hence facilitating readout. Moreover, the sensors are fabricated with only one layer of conductive fabric, which facilitates the design and realization of the wearable device. We observed the capability of our system to predict knee sagittal angle in comparison to gold-standard optical motion capture during knee flexion from a seated position and squats: the results showed an R2 coefficient between 0.77 and 0.99, root mean squared errors between 4.15 and 12.19 degrees, and mean absolute errors between 3.28 and 10.34 degrees. Squat movements generally yielded more accurate predictions than knee flexion from a seated position. The combination of the data from multiple sensors resulted in R2 coefficient values of 0.88 or higher. This preliminary work demonstrates the feasibility of the presented system. Future work should include more participants to further assess the accuracy and repeatability in the presence of larger interpersonal variability.
| S-EPMC10747625 | biostudies-literature
Project description:Fetal movement (FM) is an essential physiological parameter to determine the health status of the fetus. To address the problems of harrowing FM signal extraction and the low recognition rate of traditional machine learning classifiers in FM signal detection, this paper develops a passive FM signal detection system based on intelligent sensing technology. FM signals are obtained from the abdomen of the pregnant woman by using accelerometers. The FM signals are extracted and identified according to the clinical nature of the features hidden in the amplitude and waveform of the FM signals that fluctuate in duration. The system consists of four main stages: (i) FM signal preprocessing, (ii) maternal artifact signal preidentification, (iii) FM signal identification, and (iv) FM classification. Firstly, Kalman filtering is used to reconstruct the FM signal in a continuous low-amplitude noise background. Secondly, the maternal artifact signal is identified using an amplitude threshold algorithm. Then, an innovative dictionary learning algorithm is used to construct a dictionary of FM features, and orthogonal matching pursuit and adaptive filtering algorithms are used to identify the FM signals, respectively. Finally, mask fusion classification is performed based on the multiaxis recognition results. Experiments are conducted to evaluate the performance of the proposed FM detection system using publicly available and self-built accelerated FM datasets. The classification results showed that the orthogonal matching pursuit algorithm was more effective than the adaptive filtering algorithm in identifying FM signals, with a positive prediction value of 89.74%. The proposed FM detection system has great potential and promise for wearable FM health monitoring.
| S-EPMC8443392 | biostudies-literature
Project description:Radio frequency (RF) technique, for its better penetrability over traditional techniques such as infrared or ultrasound, is widely used for indoor localization and tracking. In this paper, three novel measurements, point decision accuracy, path matching error and wrong jumping ratio, are firstly defined to express the localization efficiency. Then, a novel RSSI-based smooth localization (RSL) algorithm is designed, implemented, and evaluated on the WiFi networks. The tree-based mechanism determines the current position and track of the entity by assigning the weights and accumulative weights for all collected RSSI information of reference points so as to make the localization smooth. The evaluation results indicate that the proposed algorithm brings better localization smoothness of reducing 10% path matching error and 30% wrong jumping ratio over the RADAR system.
| S-EPMC4101211 | biostudies-other
Project description:Replacement orthopedic surgeries are among the most common surgeries worldwide, but clinically used passive implants cannot prevent failure rates and inherent revision arthroplasties. Optimized non-instrumented implants, resorting to preclinically tested bioactive coatings, improve initial osseointegration but lack long-term personalized actuation on the bone-implant interface. Novel bioelectronic devices comprising biophysical stimulators and sensing systems are thus emerging, aiming for long-term control of peri-implant bone growth through biointerface monitoring. These acting-sensing dual systems require high frequency (HF) operations able to stimulate osteoinduction/osteoconduction, including matrix maturation and mineralization. A sensing-compatible capacitive stimulator of thin interdigitated electrodes and delivering an electrical 60 kHz HF stimulation, 30 min/day, is here shown to promote osteoconduction in pre-osteoblasts and osteoinduction in human adipose-derived mesenchymal stem cells (hASCs). HF stimulation through this capacitive interdigitated system had significant effects on osteoblasts' collagen-I synthesis, matrix, and mineral deposition. A proteomic analysis of microvesicles released from electrically-stimulated osteoblasts revealed regulation of osteodifferentiation and mineralization-related proteins (e.g. Tgfb3, Ttyh3, Itih1, Aldh1a1). Proteomics data are available via ProteomeXchange with the identifier PXD028551. Further, under HF stimulation, hASCs exhibited higher osteogenic commitment and enhanced hydroxyapatite deposition. These promising osteoinductive/conductive capacitive stimulators will integrate novel bioelectronic implants able to monitor the bone-implant interface and deliver personalized stimulation to peri-implant tissues.
| S-EPMC8611088 | biostudies-literature
Project description:A polyvinylidene fluoride (PVDF) film-based capacitive biosensor was developed for glucose sensing. This device consists of a PVDF film sandwiched between two electrodes. A capacitive biosensor measures the dielectric properties of the dielectric layers at the interface between the electrolyte and the electrode. A glucose oxidase (GOx) enzyme was immobilized onto the electrode to oxidize glucose. In practice, the biochemical reaction of glucose with the GOx enzyme generates free electron carriers. Consequently, the potential difference between the electrodes is increased, resulting in a measurable voltage output of the biosensor. The device was tested for various glucose concentrations in the range of 0.013 to 5.85 M, and various GOx enzyme concentrations between 4882.8 and 2.5 million units/L. We found that the sensor output increased with increasing glucose concentration up to 5.85 M. These results indicate that the PVDF film-based capacitive biosensors can be properly applied to glucose sensing and provide opportunities for the low-cost fabrication of glucose-based biosensors based on PVDF materials.
| S-EPMC5872060 | biostudies-literature
Project description:Precise localization and pose estimation in indoor environments are commonly employed in a wide range of applications, including robotics, augmented reality, and navigation and positioning services. Such applications can be solved via visual-based localization using a pre-built 3D model. The increase in searching space associated with large scenes can be overcome by retrieving images in advance and subsequently estimating the pose. The majority of current deep learning-based image retrieval methods require labeled data, which increase data annotation costs and complicate the acquisition of data. In this paper, we propose an unsupervised hierarchical indoor localization framework that integrates an unsupervised network variational autoencoder (VAE) with a visual-based Structure-from-Motion (SfM) approach in order to extract global and local features. During the localization process, global features are applied for the image retrieval at the level of the scene map in order to obtain candidate images, and are subsequently used to estimate the pose from 2D-3D matches between query and candidate images. RGB images only are used as the input of the proposed localization system, which is both convenient and challenging. Experimental results reveal that the proposed method can localize images within 0.16 m and 4° in the 7-Scenes data sets and 32.8% within 5 m and 20° in the Baidu data set. Furthermore, our proposed method achieves a higher precision compared to advanced methods.
| S-EPMC8153307 | biostudies-literature
Project description:In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB) technologies. The sensing array consists of a polydimethlysiloxane (PDMS) structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array.
| S-EPMC3230994 | biostudies-other
Project description:In this paper we tackle the problem of indoor robot localization by using a vision-based approach. Specifically, we propose a visual odometer able to give back the relative pose of an omnidirectional automatic guided vehicle (AGV) that moves inside an indoor industrial environment. A monocular downward-looking camera having the optical axis nearly perpendicular to the ground floor, is used for collecting floor images. After a preliminary analysis of images aimed at detecting robust point features (keypoints) takes place, specific descriptors associated to the keypoints enable to match the detected points to their consecutive frames. A robust correspondence feature filter based on statistical and geometrical information is devised for rejecting those incorrect matchings, thus delivering better pose estimations. A camera pose compensation is further introduced for ensuring better positioning accuracy. The effectiveness of proposed methodology has been proven through several experiments, in laboratory as well as in an industrial setting. Both quantitative and qualitative evaluations have been made. Outcomes have shown that the method provides a final positioning percentage error of 0.21% on an average distance of 17.2 m. A longer run in an industrial context has provided comparable results (a percentage error of 0.94% after about 80 m). The average relative positioning error is about 3%, which is still in good agreement with current state of the art.
| S-EPMC7038713 | biostudies-literature
Project description:Accurate, inexpensive, and reliable real-time indoor localization holds the key to the full potential of the context-aware applications and location-based Internet of Things (IoT) services. State-of-the-art indoor localization systems are coping with the complex non-line-of-sight (NLOS) signal propagation which hinders the use of proven multiangulation and multilateration methods, as well as with prohibitive installation costs, computational demands, and energy requirements. In this paper, we present a novel sensor utilizing low-range infrared (IR) signal in the line-of-sight (LOS) context providing high precision angle-of-arrival (AoA) estimation. The proposed sensor is used in the pragmatic solution to the localization problem that avoids NLOS propagation issues by exploiting the powerful concept of the wireless sensor network (WSN). To demonstrate the proposed solution, we applied it in the challenging context of the supermarket cart navigation. In this specific use case, a proof-of-concept navigation system was implemented with the following components: IR-AoA sensor prototype and the corresponding WSN used for cart localization, server-side application programming interface (API), and client application suite consisting of smartphone and smartwatch applications. The localization performance of the proposed solution was assessed in, altogether, four evaluation procedures, including both empirical and simulation settings. The evaluation outcomes are ranging from centimeter-level accuracy achieved in static-1D context up to 1 m mean localization error obtained for a mobile cart moving at 140 cm/s in a 2D setup. These results show that, for the supermarket context, appropriate localization accuracy can be achieved, along with the real-time navigation support, using readily available IR technology with inexpensive hardware components.
| S-EPMC7663400 | biostudies-literature