Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Coexistence of Write Once Read Many Memory and Memristor in blend of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate and Polyvinyl Alcohol.

ABSTRACT: In this work, the coexistence of Write Once Read Many Memory (WORM) and memristor can be achieved in a single device of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT: PSS) and Polyvinyl Alcohol (PVA) blend organic memory system. In memristor mode, the bistable resistance states of the device can be cycled for more than 1000 times. Once a large negative bias of -8V was applied to the device, it was switched to permanent high resistance state that cannot be restored back to lower resistance states. The mechanism of the memristor effect can be attributed to the charge trapping behaviour in PVA while the WORM effect can be explained as the electrochemical characteristic of PEDOT: PSS which harnesses the percolative conduction pathways. The results may facilitate multipurpose memory device with active tunability.

SUBMITTER: Nguyen VC

PROVIDER: S-EPMC5150231 | biostudies-literature | 2016 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Coexistence of Write Once Read Many Memory and Memristor in blend of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate and Polyvinyl Alcohol.

Nguyen Viet Cuong VC Lee Pooi See PS

Scientific reports 20161212

In this work, the coexistence of Write Once Read Many Memory (WORM) and memristor can be achieved in a single device of Poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT: PSS) and Polyvinyl Alcohol (PVA) blend organic memory system. In memristor mode, the bistable resistance states of the device can be cycled for more than 1000 times. Once a large negative bias of -8V was applied to the device, it was switched to permanent high resistance state that cannot be restored back to lower ...[more]

PMID: 27941830

Similar Datasets

Resistive Switching Memory Phenomena in PEDOT PSS: Coexistence of Switchable Diode Effect and Write Once Read Many Memory.

Project description:We study resistive switching memory phenomena in conducting polymer PEDOT PSS. In the same film, there are two types of memory behavior coexisting; namely, the switchable diode effect and write once read many memory. This is the first report on switchable diode phenomenon based on conducting organic materials. The effect was explained as charge trapping of PEDOT PSS film and movement of proton. The same PEDOT PSS device also exhibits write once read many memory (WORM) phenomenon which arises due to redox reaction that reduces PEDOT PSS and renders it non-conducting. The revelation of these two types of memory phenomena in PEDOT PSS highlights the remarkable versatility of this conducting conjugated polymer.

| S-EPMC4726348 | biostudies-literature

Engineering a Poly(3,4-ethylenedioxythiophene):(Polystyrene Sulfonate) Surface Using Self-Assembling Molecules-A Chemical Library Approach.

Project description:The surface properties of poly(3,4-ethylenedioxythiophene):(polystyrene sulfonate) (PEDOT:PSS) affect the performance of many organic electronic devices. The work function determines the efficiency of the charge carrier transfer between PEDOT:PSS electrodes and the active layer of the device. The surface free energy affects phase separation in multicomponent blends that are typically used to fabricate active layers of organic light-emitting diodes and photovoltaic devices. Here, we present a method to prepare PEDOT:PSS films with a gradient work function and surface free energy. This modification was achieved by evaporation of trimethoxy(3,3,3-trifluoropropyl)silane in such a way that the degree of surface coverage of the molecules varied in the selected direction. Gradient films were used as electrodes to fabricate two-terminal PEDOT:PSS/poly(3-hexyl thiophene)/Au devices to rapidly screen for the influence of the modification on the performance of the prepared polymer diodes. Gradual changes in the morphology of the solution-cast model poly(3-butyl thiophene)/poly-bromostyrene films followed changes in the surface energy of the substrate.

| S-EPMC6641617 | biostudies-literature

A Bilayered Wood-Poly(3,4-ethylenedioxythiophene):Polystyrene Sulfonate Hydrogel Interfacial Evaporator for Sustainable Solar-Driven Sewage Purification and Desalination.

Project description:Solar-driven interfacial evaporation and purification is a promising solar energy conversion technology to produce clean water or solve water scarcity. Although wood-based photothermal materials have attracted particular interest in solar water purification and desalination due to their rapid water supply and great heat localization, challenges exist given their complicated processing methods and relatively poor stability. Herein, we propose a facile approach for fabricating a bilayered wood-poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (wood-PEDOT:PSS) hydrogel interfacial evaporator by direct drop-casting and dry-annealing. Benefiting from the unique combined merits of the wood-PEDOT:PSS hydrogel evaporator, i.e., excellent light absorption (~99.9%) and efficient photothermal conversion of nanofibrous PEDOT:PSS and the strong hydrophilicity and fast water transport from wood, the as-fabricated bilayered wood-PEDOT:PSS hydrogel evaporator demonstrates a remarkably high evaporation rate (~1.47 kg m-2 h-1) and high energy efficiency (~75.76%) at 1 kW m-2. We further demonstrate the practical applications of such an evaporator for sewage purification and desalination, showing outstanding performance stability and partial salt barrier capability against a continuous 10-day test in simulated seawater and an ultrahigh ion removal rate of 99.9% for metal ion-containing sewage. The design and fabrication of such novel, efficient wood-based interfacial evaporators pave the way for large-scale applications in solar water purification.

| S-EPMC10457931 | biostudies-literature

Wide-Range Humidity-Temperature Hybrid Flexible Sensor Based on Strontium Titanate and Poly 3,4 Ethylenedioxythiophene Polystyrene Sulfonate for Wearable 3D-Printed Mask Applications.

Project description:In this paper, we report a fast, linear wide-range hybrid flexible sensor based on a novel composite of strontium titanate (SrTiO3) and poly 3,4 ethylenedioxythiophene polystyrene sulfonate (PEDOT: PSS) as a sensing layer. Inter-digitate electrodes (IDEs) were printed for humidity monitoring (finger: 250 µm; spacing: 140 µm; length: 8 mm) whilst a meander-based pattern was printed for the temperature measurement (meander thickness: 180 µm; spacing: 400 µm) on each side of the PET substrate using silver ink. Moreover, active layers with different concentration ratios were coated on the electrodes using a spray coating technique. The as-developed sensor showed an excellent performance, with a humidity measurement range of (10-90% RH) and temperature measurement range of (25-90 °C) with a fast response (humidity: 5 s; temperature: 4.2 s) and recovery time (humidity: 8 s; temperature: 4.4 s). The reliability of the sensor during mechanical bending of up to 5.5 mm was validated with a reliable performance. The sensor was also used in real-world applications to measure human respiration. For this, a suggested sensor-based autonomous wireless node was included in a 3D-printed mask. The manufactured sensor was an excellent contender for wearable and environmental applications because of its exceptional performance, which allowed for the simultaneous measurement of both quantities by a single sensing device.

| S-EPMC9823765 | biostudies-literature

Melt-Electrospun Polyethylene Nanofiber Obtained from Polyethylene/Polyvinyl Butyral Blend Film.

Project description:We prepared low-density polyethylene (LDPE) nanofiber, a few hundred nanometers in diameter, using polyvinyl butyral (PVB) and a laser melt-electrospinning (M-ESP) device. We blended PVB with LDPE via an internal melt mixer, removed the PVB after M-ESP by ethanol treatment, and studied the influence of PVB on fiber diameter. A substantial diameter reduction with improved crystallinity of LDPE fiber was observed with increased PVB content in the blend. PVB inclusion also increased the polarity of the LDPE/PVB blend, resulting in better spinnability. The removal of PVB from LDPE/PVB blend fiber caused a massive drop in the LDPE fiber diameter, due to fiber splitting, particularly in PVB-rich samples. Fourier transform infrared (FTIR) spectroscopy of fibers confirmed that the prepared nanofiber was the same as pure LDPE fiber.

| S-EPMC7077628 | biostudies-literature

Interaction behavior of polyion-counterion for sodium polystyrene sulfonate.

Project description:The specific conductances are measured for sodium polystyrene sulfonate in water and methanol-water mixture. The equivalent conductivity data against concentration are evaluated by scaling concept. The effects of the solvent composition and the polyelectrolyte concentration on the fractions of uncondensed counterions (f) , the polyion conductivities λp , the standard state free energies of counterion association ΔGAo , and the polyion transference number TP are calculated. The charge density (ξ) of sodium polystyrene sulfonate was used for the research article [1] to see the variation of the critical aggregation concentration of cetyltrimethyl ammonium bromide in sodium polystyrene sulfonate against the charge density of sodium polystyrene sulfonate.

| S-EPMC6710635 | biostudies-literature

Transparent Wood Smart Windows: Polymer Electrochromic Devices Based on Poly(3,4-Ethylenedioxythiophene):Poly(Styrene Sulfonate) Electrodes.

Project description:Transparent wood composites, with their high strength and toughness, thermal insulation, and excellent transmissivity, offer a route to replace glass for diffusely transmitting windows. Here, conjugated-polymer-based electrochromic devices (ECDs) that switch on-demand are demonstrated using transparent wood coated with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as a transparent conducting electrode. These ECDs exhibit a vibrant magenta-to-clear color change that results from a remarkably colorless bleached state. Furthermore, they require low energy and power inputs of 3?mWh?m-2 at 2?W?m-2 to switch due to a high coloration efficiency (590?cm2 ?C-1 ) and low driving voltage (0.8?V). Each device component is processed with high-throughput methods, which highlights the opportunity to apply this approach to fabricate mechanically robust, energy-efficient smart windows on a large scale.

| S-EPMC5873251 | biostudies-literature

Potassium-chelating drug sodium polystyrene sulfonate enhances lysosomal function and suppresses proteotoxicity.

Project description:Lysosomes are crucial for degradation and recycling of damaged proteins and cellular components. Therapeutic strategies enhancing lysosomal function are a promising approach for aging and age-related neurodegenerative diseases. Here, we show that an FDA approved drug sodium polystyrene sulfonate (SPS), used to reduce high blood potassium in humans, enhances lysosomal function both in C. elegans and in human neuronal cells. Enhanced lysosomal function following SPS treatment is accompanied by the suppression of proteotoxicity caused by expression of the neurotoxic peptides Aβ and TAU. Additionally, treatment with SPS imparts health benefits as it significantly increases lifespan in C. elegans. Overall our work supports the potential use of SPS as a prospective geroprotective intervention.

| S-EPMC9886731 | biostudies-literature

Silver-Polystyrene (Ag/PS) Nanocomposites Doped with Polyvinyl Alcohol (PVA)-Fabrication and Bactericidal Activity.

Project description:In the present work, we report the studies on perfectly homogeneous nanocomposites composed of polystyrene-grafted silver nanoparticles (Ag@PS) as a bioactive fulfilment and a mixture of polystyrene (PS) and polyvinyl alcohol (PVA) as a matrix. The procedure developed by our group of the nanocomposites' preparation consists of three steps: synthesis of narrow-dispersive AgNPs (5.96 ± 1.02 nm); grafting of narrowly dispersed polystyrene onto the surface of AgNPs; thermoforming with a mixture of PS/PVA. Kirby-Bauer (K-B) and Dynamic Shake Flask (DSF) assays revealed high antibacterial activity against a series of Gram(-) and Gram(+) bacteria strains of the fabricated nanocomposites at low silver content (0.5%). We showed that the doping of Ag/PS composites with PVA increases the antibacterial activity of composites. The hydrophilic component in the nanocomposites enables easier water migration inside the polymer matrix, which makes releasing silver nanoparticles and silver ions to the environment facile.

| S-EPMC7697651 | biostudies-literature

Long-term efficacy of oral calcium polystyrene sulfonate for hyperkalemia in CKD patients.

Project description:BackgroundCalcium polystyrene sulfonate (CPS) has long been used to treat hyperkalemia in patients with chronic kidney disease (CKD). However, its efficacy and safety profile have not been systematically explored. We investigated the long-term efficacy of oral CPS for treating mild hyperkalemia on an outpatient basis.MethodsWe performed a retrospective analysis of ambulatory CKD patients who were prescribed CPS for > 1 week because of elevated serum potassium levels > 5.0 mmol/L. Patients were divided into four groups according to the length of time that they took a fixed dosage of CPS (Group 1, < 3 months; Group 2, 3-6 months; Group 3, 6-12 months; and Group 4, > 1 year). Response was defined as a decrease in the serum potassium level (> 0.3 mmol/L) after treatment with CPS.ResultsWe enrolled a total of 247 adult patients with a basal eGFR level of 30 ± 15 mL/min/1.73 m2. All patients took small doses of CPS (8.0 ± 3.6 g/d), and serum potassium decreased in a dose-dependent fashion. Serum potassium of all patients decreased significantly from 5.8 ± 0.3 mmol/L to 4.9 ± 0.7 mmol/L with CPS treatment (P < 0.001). The response rates were 79.9%, 71.4%, 66.7%, and 86.8% in Groups 1, 2, 3, and 4, respectively. No serious adverse effects were reported during CPS administration, though constipation was noted in 19 patients (8%).ConclusionSmall doses of oral CPS are effective and safe for controlling mild hyperkalemia in CKD patients over a long period of time.

| S-EPMC5362098 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data