Dataset Information

Comparative metabolic state of microflora on the surface of the anode electrode in a microbial fuel cell operated at different pH conditions.

ABSTRACT: The metabolic state of microflora (mixed microbial cultures) in microbial fuel cells (MFCs) is currently unclear. Metabolomic analyses were conducted of microflora growing on the anodic electrodes of MFCs operated at pH 7.0, 5.5, or 4.0 and utilizing starch as the major carbon substrate. A much higher current was produced at pH 7.0 than at pH 5.5 and 4.0, correlating with an increased population ratio of Geobacter species to the total bacteria growing on the electrode. Most intracellular metabolites related to the tricarboxylic acid (TCA) cycle were present at a higher level at pH 7.0 than at pH 5.5 and 4.0, and the levels of metabolites correlated well with the obtained current densities. A high intracellular adenosine triphosphate (ATP)/adenosine diphosphate (ADP) ratio at pH 7.0, compared to at pH 5.5 and 4.0, likewise supported current production. Overall, the metabolomic analyses demonstrated that activation of the TCA cycle and increased ATP generation are critical parameters for electricity generation by microflora.

SUBMITTER: Sasaki D

PROVIDER: S-EPMC5174012 | biostudies-literature | 2016 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Comparative metabolic state of microflora on the surface of the anode electrode in a microbial fuel cell operated at different pH conditions.

Sasaki Daisuke D Sasaki Kengo K Tsuge Yota Y Kondo Akihiko A

AMB Express 20161220 1

The metabolic state of microflora (mixed microbial cultures) in microbial fuel cells (MFCs) is currently unclear. Metabolomic analyses were conducted of microflora growing on the anodic electrodes of MFCs operated at pH 7.0, 5.5, or 4.0 and utilizing starch as the major carbon substrate. A much higher current was produced at pH 7.0 than at pH 5.5 and 4.0, correlating with an increased population ratio of Geobacter species to the total bacteria growing on the electrode. Most intracellular metabol ...[more]

PMID: 28000139

Similar Datasets

Project description:Microbial fuel cells (MFCs) generate energy while aiding the biodegradation of waste through the activity of an electroactive mixed biofilm. Metabolic cooperation is essential for MFCs' efficiency, especially during early colonization. Thus, examining specific ecological processes that drive the assembly of anode biofilms is highly important for shortening startup times and improving MFC performance, making this technology cost-effective and sustainable. Here, we use metagenomics to show that bioaugmentation of the anode surface with a taxonomically defined electroactive consortium, dominated by Desulfuromonas, resulted in an extremely rapid current density generation. Conversely, the untreated anode surface resulted in a highly stochastic and slower biofilm assembly. Remarkably, an efficient anode colonization process was obtained only if wastewater was added, leading to a nearly complete replacement of the bioaugmented community by Geobacter lovleyi Although different approaches to improve MFC startup have been investigated, we propose that only the combination of anode bioaugmentation with wastewater inoculation can reduce stochasticity. Such an approach provides the conditions that support the growth of specific newly arriving species that positively support the fast establishment of a highly functional anode biofilm.IMPORTANCE Mixed microbial communities play important roles in treating wastewater, in producing renewable energy, and in the bioremediation of pollutants in contaminated environments. While these processes are well known, especially the community structure and biodiversity, how to efficiently and robustly manage microbial community assembly remains unknown. Moreover, it has been shown that a high degree of temporal variation in microbial community composition and structure often occurs even under identical environmental conditions. This heterogeneity is directly related to stochastic processes involved in microbial community organization, similarly during the initial stages of biofilm formation on surfaces. In this study, we show that anode surface pretreatment alone is not sufficient for a substantial improvement in startup times in microbial fuel cells (MFCs), as previously thought. Rather, we have discovered that the combination of applying a well-known consortium directly on the anode surface together with wastewater (including the bacteria that they contain) is the optimized management scheme. This allowed a selected colonization process by the wastewater species, which improved the functionality relative to that of untreated systems.

Project description:Metals are considered a suitable anode material for microbial fuel cells (MFCs) because of their high electrical conductivity. However, only a few types of metals have been used as anodes, and an extensive screening of metals has not yet been conducted. In this study, to develop a new metal anode for increased electricity generation in MFCs, 14 different metals (Al, Ti, Fe, Ni, Cu, Zn, Zr, Nb, Mo, Ag, In, Sn, Ta, and W) and 31 of their oxidized forms were comprehensively tested. Oxidized-metal anodes were prepared using flame oxidation, heat treatment, and electrochemical oxidation. The selected anodes were further evaluated in detail using air-cathode single-chambered MFCs.The untreated Mo and electrochemically oxidized Mo anodes showed high averages of maximum power densities in the screening test, followed by flame-oxidized (FO) W, FO-Fe, FO-Mo, and Sn-based anodes. The untreated Mo and FO-W anodes were selected for further evaluation. X-ray analyses revealed that the surface of the Mo anode was naturally oxidized in the presence of air, forming a layer of MoO3, a known oxidation catalyst. A high maximum power density (1296 mW/m2) was achieved using the Mo anode in the MFCs, which was superior to that obtained using the FO-W anode (1036 mW/m2). The Mo anode, but not the FO-W anode, continued to produce current without detectable corrosion until the end of operation (350 days). Geobacter was abundant in both biofilms on the Mo and FO-W anodes, as analyzed by high-throughput sequencing of the 16S rRNA gene.The screening test revealed that Mo, W, Fe, and Sn are useful MFC anode materials. The detailed analyses demonstrated that the Mo anode is a high-performance electrode with structural simplicity and long-term stability in MFCs. The anode can be easily prepared by merely shaping Mo materials to the desired forms. These properties would enable the large-scale preparation of the anode, required for practical MFC applications. This study also implies the potential involvement of Geobacter in the Mo and W cycles on Earth.

Dataset Information

Comparative metabolic state of microflora on the surface of the anode electrode in a microbial fuel cell operated at different pH conditions.

Publications

Comparative metabolic state of microflora on the surface of the anode electrode in a microbial fuel cell operated at different pH conditions.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets