Browse
Submit Data
Databases
API
Help

Dataset Information

14 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Comfortable, high-efficiency heat pump with desiccant-coated, water-sorbing heat exchangers.

ABSTRACT: Comfortable, efficient, and affordable heating, ventilation, and air conditioning systems in buildings are highly desirable due to the demands of energy efficiency and environmental friendliness. Traditional vapor-compression air conditioners exhibit a lower coefficient of performance (COP) (typically 2.8-3.8) owing to the cooling-based dehumidification methods that handle both sensible and latent loads together. Temperature- and humidity-independent control or desiccant systems have been proposed to overcome these challenges; however, the COP of current desiccant systems is quite small and additional heat sources are usually needed. Here, we report on a desiccant-enhanced, direct expansion heat pump based on a water-sorbing heat exchanger with a desiccant coating that exhibits an ultrahigh COP value of more than 7 without sacrificing any comfort or compactness. The pump's efficiency is doubled compared to that of pumps currently used in conventional room air conditioners, which is a revolutionary HVAC breakthrough. Our proposed water-sorbing heat exchanger can independently handle sensible and latent loads at the same time. The desiccants adsorb moisture almost isothermally and can be regenerated by condensation heat. This new approach opens up the possibility of achieving ultrahigh efficiency for a broad range of temperature- and humidity-control applications.

SUBMITTER: Tu YD

PROVIDER: S-EPMC5227918 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Time series of heat demand and heat pump efficiency for energy system modeling.

Project description:With electric heat pumps substituting for fossil-fueled alternatives, the temporal variability of their power consumption becomes increasingly important to the electricity system. To easily include this variability in energy system analyses, this paper introduces the "When2Heat" dataset comprising synthetic national time series of both the heat demand and the coefficient of performance (COP) of heat pumps. It covers 16 European countries, includes the years 2008 to 2018, and features an hourly resolution. Demand profiles for space and water heating are computed by combining gas standard load profiles with spatial temperature and wind speed reanalysis data as well as population geodata. COP time series for different heat sources - air, ground, and groundwater - and different heat sinks - floor heating, radiators, and water heating - are calculated based on COP and heating curves using reanalysis temperature data. The dataset, as well as the scripts and input parameters, are publicly available under an open source license on the Open Power System Data platform.

| S-EPMC6773861 | biostudies-literature

Thermofluidic heat exchangers for actuation of transcription in artificial tissues.

Project description:Spatial patterns of gene expression in living organisms orchestrate cell decisions in development, homeostasis, and disease. However, most methods for reconstructing gene patterning in 3D cell culture and artificial tissues are restricted by patterning depth and scale. We introduce a depth- and scale-flexible method to direct volumetric gene expression patterning in 3D artificial tissues, which we call "heat exchangers for actuation of transcription" (HEAT). This approach leverages fluid-based heat transfer from printed networks in the tissues to activate heat-inducible transgenes expressed by embedded cells. We show that gene expression patterning can be tuned both spatially and dynamically by varying channel network architecture, fluid temperature, fluid flow direction, and stimulation timing in a user-defined manner and maintained in vivo. We apply this approach to activate the 3D positional expression of Wnt ligands and Wnt/β-catenin pathway regulators, which are major regulators of development, homeostasis, regeneration, and cancer throughout the animal kingdom.

| S-EPMC7527231 | biostudies-literature

Reduced Bimolecular Recombination in Blade-Coated, High-Efficiency, Small-Molecule Solar Cells.

Project description:To realize the full promise of solution deposited photovoltaic devices requires processes compatible with high-speed manufacturing. We report the performance and morphology of blade-coated bulk heterojunction devices based on the small molecule donor p-DTS(FBTTh2)2 when treated with a post-deposition solvent vapor annealing (SVA) process. SVA with tetrahydrofuran improves the device performance of blade-coated films more than solvent additive processing (SA) with 1,8-diiodooctane. In spin-coating, SA and SVA achieve similar device performance. Our optimized, blade coated, SVA devices achieve power conversion efficiencies over 8 % and maintain high efficiencies in films up to ≈ 250 nm thickness, providing valuable resilience to small process variations in high-speed manufacturing. Using impedance spectroscopy, we show that this advantageous behavior originates from highly suppressed bimolecular recombination in the SVA-treated films. Electron microscopy and grazing-incidence X-ray scattering experiments show that SA and SVA both produce highly crystalline donor domains, but SVA films have a radically smaller domain size compared to SA films. We attribute the different behavior to variations in initial nucleation density and relative ability of SVA and SA to control subsequent crystal growth.

| S-EPMC5695694 | biostudies-literature

Tunable Brownian magneto heat pump.

Project description:We propose a mesoscopic Brownian magneto heat pump made of a single charged Brownian particle that is steered by an external magnetic field. The particle is subjected to two thermal noises from two different heat sources. When confined, the particle performs gyrating motion around a potential energy minimum. We show that such a magneto-gyrator can be operated as both a heat engine and a refrigerator. The maximum power delivered by the engine and the performance of the refrigerator, namely the rate of heat transferred per unit external work, can be tuned and optimised by the applied magnetic field. Further tunability of the key properties of the engine, such as the direction of gyration and the torque exerted by the engine on the confining potential, is obtained by varying the strength and direction of the applied magnetic field. In principle, our predictions can be tested by experiments with colloidal particles and complex plasmas.

| S-EPMC9352690 | biostudies-literature

Field monitoring data on a residential exhaust air heat pump system (air-to-air heat pump).

Project description:This data article presents the raw data used in the article "Experimental and analytical evaluation of exhaust air heat pumps in ventilation-based heating systems" [1]. The data set contains measurement results of a field monitoring on a residential exhaust air heat pump system (air-to-air heat pump) in Germany. This data could be used to investigate the dynamic behavior and performance of the exhaust air heat pump systems. The data set contains air temperature and humidity of all four sides of the heat pump unit. Moreover, the electrical consumption of the unit and the dynamic pressure difference on the exhaust side (as indication of the air volume rate) could be also found in the data set.

| S-EPMC8473652 | biostudies-literature

Thermal response test data of five quadratic cross section precast pile heat exchangers.

Project description:This data article comprises records from five Thermal Response Tests (TRT) of quadratic cross section pile heat exchangers. Pile heat exchangers, typically referred to as energy piles, consist of traditional foundation piles with embedded heat exchanger pipes. The data presented in this article are related to the research article entitled "Comparing heat flow models for interpretation of precast quadratic pile heat exchanger thermal response tests" (Alberdi-Pagola et al., 2018) [1]. The TRT data consists of measured inlet and outlet temperatures, fluid flow and injected heat rate recorded every 10 min. The field dataset is made available to enable model verification studies.

| S-EPMC5996141 | biostudies-literature

Water Polishing improved controlled-release characteristics and fertilizer efficiency of castor oil-based polyurethane coated diammonium phosphate.

Project description:The production cost of controlled-release fertilizers is an important factoring limiting their applications. To reduce the coating cost of diammonium phosphate (DAP) and improve its nutrition release characteristics, the fertilizer cores were modified by water polishing with three dosages at 1, 2, and 3%. The effects of modification were evaluated in terms of particle hardness, size distribution, angle of repose and specific surface area. Castor oil-based polyurethane was used as coating material for fertilizer performance evaluation. A pot experiment was conducted to verify the fertilizer efficiency of coated diammonium phosphate (CDAP) with maize. The results showed that polishing with 2% water reduced the angle of repose by 2.48-10.57% and specific surface area by 5.70-48.76%, making it more suitable for coating. The nutrient release period of CDAP was significantly prolonged by 5.36 times. Soil available phosphorous, enzyme activities, maize grain yield, and phosphorous use efficiency were all improved through the blending application of coated and normal phosphate fertilizer. This study demonstrated that water-based surface modification is a low-cost and effective method for improvement and promotion of controlled release P fertilizers.

| S-EPMC7113275 | biostudies-literature

Endoscope-connected water pump with high flow rates improves the unsedated colonoscopy performance by water immersion method.

Project description:ObjectivesThe aim of this study was to determine if different water pump flow rates influence the insertion time of water immersion method in unsedated patients. We tested the hypothesis that high flow rate (HFR) is more effective than low flow rate (LFR) in facilitating insertion. Clinical registration number: NCT01869296.MethodsConsecutive symptomatic patients without prior abdominal surgery were consented and enrolled. They were randomized to an HFR (10.4 mL/s) or LFR (1.7 mL/s) group. The patients were not informed about the flow rate of the water pump (single blinded). Patients underwent unsedated colonoscopy examination with standard colonoscope. Demographic and procedural parameters were recorded. Data were analyzed with Student's t-test or Chi-square test as appropriate.ResultsA total of 132 patients (66 in HFR and 66 in LFR group) were recruited. The HFR group showed significantly shorter cecal intubation time (12.5±6.2 min in HFR vs 16.3±7.3 min in LFR, p=0.004), shorter time to pass rectosigmoid (3.6±2.2 min in HFR vs 6.2±4.6 min in LFR, p<0.001), and lower pain score (4.2±2.8 in HFR vs 5.3±2.6 in LFR, p=0.024). The cecal intubation rate was not significantly different (87.9% in HFR vs 80.3% in LFR, p=0.34), and 29 (14 in HFR and 15 in LFR) patients with signs of colon redundancy were successfully intubated to the cecum after repeated loop reduction and position changes.ConclusionCompared to LFR, HFR of the water infusion pump significantly reduced colonoscopy insertion time and pain score in unsedated patients. Significantly shorter time to pass the rectosigmoid appeared to play a contributory role.

| S-EPMC5769563 | biostudies-literature

Carrier fluid temperature data in vertical ground heat exchangers with a varying pipe separation.

Project description:The dataset in this article is related to shallow geothermal energy systems, which efficiently provide renewable heating and cooling to buildings, and specifically to the performance of the vertical ground heat exchangers (GHE) embedded in the ground. GHEs incorporate pipes with a circulating (carrier) fluid, exchanging heat between the ground and the building. The data show the average and inlet temperatures of the carrier fluid circulating in the pipes embedded in the GHEs (which directly relate to the performance of these systems). These temperatures were generated using detailed finite element modelling and comprise part of the daily output of various one-year simulations, accounting for numerous design parameters (including different pipe geometries) and ground conditions. An expanded explanation of the data as well as comprehensive analyses on how they were used can be found in the article titled "Ground-source heat pump systems: the effect of variable pipe separation in ground heat exchangers" (Makasis N, Narsilio GA, Bidarmaghz A, Johnston IW, 2018) [1].

| S-EPMC5996741 | biostudies-literature

Fabrication of magnetic water-soluble hyperbranched polyol functionalized graphene oxide for high-efficiency water remediation.

Project description:Magnetic water-soluble hyperbranched polyol functionalized graphene oxide nanocomposite (MWHPO-GO) was successfully prepared and applied to water remediation in this paper. MWHPO-GO was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), magnetization curve, zeta potential, scanning electron microscope (SEM) and transmission electron microscope (TEM) analyses. MWHPO-GO exhibited excellent adsorption performance for the removal of synthetic dyes (methylene blue (MB) and methyl violet (MV)) and heavy metal (Pb(II)). Moreover, MWHPO-GO could be simply recovered from water with magnetic separation. The pseudo-second order equation and the Langmuir model exhibited good correlation with the adsorption kinetic and isotherm data, respectively, for these three pollutants. The thermodynamic results (?G?<?0, ?H?<?0, ?S?<?0) implied that the adsorption process of MB, MV and Pb(II) was feasible, exothermic and spontaneous in nature. A possible adsorption mechanism has been proposed where ?-? stacking interactions, H-bonding interaction and electrostatic attraction dominated the adsorption of MB/MV and chelation and electrostatic attraction dominated the adsorption of Pb(II). In addition, the excellent reproducibility endowed MWHPO-GO with the potential for application in water remediation.

| S-EPMC4926210 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data