Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Transformation from slip to plastic flow deformation mechanism during tensile deformation of zirconium nanocontacts.

ABSTRACT: Various types of nanometer-sized structures have been applied to advanced functional and structural devices. Inherent structures, thermal stability, and properties of such nanostructures are emphasized when their size is decreased to several nanometers, especially, to several atoms. In this study, we observed the atomistic tensile deformation process of zirconium nanocontacts, which are typical nanostructures used in connection of nanometer-sized wires, transistors, and diodes, memory devices, and sensors, by in situ transmission electron microscopy. It was found that the contact was deformed via a plastic flow mechanism, which differs from the slip on lattice planes frequently observed in metals, and that the crystallinity became disordered. The various irregular relaxed structures formed during the deformation process affected the conductance.

SUBMITTER: Yamada K

PROVIDER: S-EPMC5317169 | biostudies-literature | 2017 Feb

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Transformation from slip to plastic flow deformation mechanism during tensile deformation of zirconium nanocontacts.

Yamada Kohei K Kizuka Tokushi T

Scientific reports 20170220

Various types of nanometer-sized structures have been applied to advanced functional and structural devices. Inherent structures, thermal stability, and properties of such nanostructures are emphasized when their size is decreased to several nanometers, especially, to several atoms. In this study, we observed the atomistic tensile deformation process of zirconium nanocontacts, which are typical nanostructures used in connection of nanometer-sized wires, transistors, and diodes, memory devices, a ...[more]

PMID: 28218244

Similar Datasets

Probing heat generation during tensile plastic deformation of a bulk metallic glass at cryogenic temperature.

Project description:Despite significant research efforts, the deformation and failure mechanisms of metallic glasses remain not well understood. In the absence of periodic structure, these materials typically deform in highly localized, thin shear bands at ambient and low temperatures. This process usually leads to an abrupt fracture, hindering their wider use in structural applications. The dynamics and temperature effects on the formation and operation of those shear bands have been the focus of long-standing debate. Here, we use a new experimental approach based on localized boiling of liquid nitrogen by the heat generated in the shear bands to monitor the tensile plastic deformation of a bulk metallic glass submerged in a cryogenic bath. With the "nitrogen bubbles heat sensor", we could capture the heat dissipation along the primary shear banding plane and follow the dynamics of the shear band operation. The observation of nitrogen boiling on the surface of the deforming metallic glass gives direct evidence of temperature increase in the shear bands, even at cryogenic temperatures. An acceleration in bubble nucleation towards the end of the apparent plastic deformation suggests a change from steady-state to runaway shear and premonitions the fracture, allowing us to resolve the sequence of deformation and failure events.

| S-EPMC6218505 | biostudies-literature

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Project description:The effect of severe plastic deformation by high-pressure torsion (HPT) on the structure and plastic tensile properties of two Zr-based bulk metallic glasses, Zr55.7Ni10Al7Cu19Co8.3 and Zr64Ni10Al7Cu19, was investigated. The compositions were chosen because, in TEM investigation, Zr55.7Ni10Al7Cu19Co8.3 exhibited nanoscale inhomogeneity, while Zr64Ni10Al7Cu19 appeared homogeneous on that length scale. The nanoscale inhomogeneity was expected to result in an increased plastic strain limit, as compared to the homogeneous material, which may be further increased by severe mechanical work. The as-cast materials exhibited 0.1% tensile plasticity for Zr64Ni10Al7Cu19 and Zr55.7Ni10Al7Cu19Co8.3. Following two rotations of HPT treatment, the tensile plastic strain was increased to 0.5% and 0.9%, respectively. Further testing was performed by X-ray diffraction and by differential scanning calorimetry. Following two rotations of HPT treatment, the initially fully amorphous Zr55.7Ni10Al7Cu19Co8.3 exhibited significantly increased free volume and a small volume fraction of nanocrystallites. A further increase in HPT rotation number did not result in an increase in plastic ductility of both alloys. Possible reasons for the different mechanical behavior of nanoscale heterogeneous Zr55.7Ni10Al7Cu19Co8.3 and homogeneous Zr64Ni10Al7Cu19 are presented.

| S-EPMC6566254 | biostudies-literature

Invariant plastic deformation mechanism in paramagnetic nickel-iron alloys.

Project description:The Invar anomaly is one of the most fascinating phenomena observed in magnetically ordered materials. Invariant thermal expansion and elastic properties have attracted substantial scientific attention and led to important technological solutions. By studying planar faults in the high-temperature magnetically disordered state of [Formula: see text], here we disclose a completely different anomaly. An invariant plastic deformation mechanism is characterized by an unchanged stacking fault energy with temperature within wide concentration and temperature ranges. This anomaly emerges from the competing stability between the face-centered cubic and hexagonal close-packed structures and occurs in other paramagnetic or nonmagnetic systems whenever the structural balance exists. The present findings create a platform for tailoring high-temperature properties of technologically relevant materials toward plastic stability at elevated temperatures.

| S-EPMC8040816 | biostudies-literature

Plastic deformation mechanisms in a severely deformed Fe-Ni-Al-C alloy with superior tensile properties.

Project description:Nanostructured metals have high strength while they usually exhibit limited uniform elongation. While, a yield strength of approximately 2.1 GPa and a uniform elongation of about 26% were achieved in a severely deformed Fe-24.8%Ni-6.0%Al-0.38%C alloy in the present work. The plastic deformation mechanisms for the coarse-grained (CG) sample and the cold-rolled (CR) samples of this alloy were investigated by a series of mechanical tests and microstructure characterizations before and after tensile tests. No obvious phase transformation was observed during the tensile deformation for the CG sample, and the plastic deformation was found to be mainly accommodated by deformation twins and dislocation behaviors. While significant phase transformation occurs for the CR samples due to the facts that the deformed grains by CR are insufficient to sustain the tensile deformation themselves and the flow stress for the CR samples is high enough to activate the martensite transformation. The amount of phase transformation increases with increasing thickness reduction of CR, resulting in excellent tensile ductility in the severely deformed alloy. The back stress hardening was found to play a more important role in the CR samples than in the CG sample due to the dynamically reinforced heterogeneous microstructure by phase transformation.

| S-EPMC5688163 | biostudies-literature

Mechanics of near-field deformation during co- and post-seismic shallow fault slip.

Project description:Poor knowledge of how faults slip and distribute deformation in the shallow crust hinders efforts to mitigate hazards where faults increasingly intersect with the expanding global population at Earth's surface. Here we analyze two study sites along the 2014 M 6.0 South Napa, California, earthquake rupture, each dominated by either co- or post-seismic shallow fault slip. We combine mobile laser scanning (MLS), active-source seismic tomography, and finite element modeling to investigate how deformation rate and mechanical properties of the shallow crust affect fault behavior. Despite four orders-of-magnitude difference in the rupture velocities, MLS-derived shear strain fields are remarkably similar at the two sites and suggest deceleration of the co-seismic rupture near Earth's surface. Constrained by the MLS and seismic data, finite element models indicate shallow faulting is more sensitive to lithologic layering and plastic yielding than to the presence of fault compliant zones (i.e., regions surrounding faults with reduced stiffness). Although both elastic and elastoplastic models can reproduce the observed surface displacement fields within the uncertainty of MLS data, elastoplastic models likely provide the most reliable representations of subsurface fault behavior, as they produce geologically reasonable stress states and are consistent with field, geodetic, and seismological observations.

| S-EPMC7081326 | biostudies-literature

Constitutive law and flow mechanism in diamond deformation.

Project description:Constitutive laws and crystal plasticity in diamond deformation have been the subjects of substantial interest since synthetic diamond was made in 1950's. To date, however, little is known quantitatively regarding its brittle-ductile properties and yield strength at high temperatures. Here we report, for the first time, the strain-stress constitutive relations and experimental demonstration of deformation mechanisms under confined high pressure. The deformation at room temperature is essentially brittle, cataclastic, and mostly accommodated by fracturing on {111} plane with no plastic yielding at uniaxial strains up to 15%. At elevated temperatures of 1000°C and 1200°C diamond crystals exhibit significant ductile flow with corresponding yield strength of 7.9 and 6.3 GPa, indicating that diamond starts to weaken when temperature is over 1000°C. At high temperature the plastic deformation and ductile flow is meditated by the <110>{111} dislocation glide and a very active {111} micro-twinning.

| S-EPMC3500768 | biostudies-other

Experimental characterization of shear transformation zones for plastic flow of bulk metallic glasses.

Project description:We report experimental characterization of shear transformation zones (STZs) for plastic flow of bulk metallic glasses (BMGs) based on a newly developed cooperative shearing model [Johnson WL, Samwer K (2005) A universal criterion for plastic yielding of metallic glasses with a (T/T(g))(2/3) temperature dependence. Phys Rev Lett 95: 195501]. The good agreement between experimental measurements and theoretical predictions in the STZ volumes provides compelling evidence that the plastic flow of metallic glasses occurs through cooperative shearing of unstable STZs activated by shear stresses. Moreover, the ductility of BMGs was found to intrinsically correlate with their STZ volumes. The experiments presented herein pave a way to gain a quantitative insight into the atomic-scale mechanisms of BMG mechanical behavior.

| S-EPMC2567442 | biostudies-literature

Machine learning plastic deformation of crystals.

Project description:Plastic deformation of micron-scale crystalline solids exhibits stress-strain curves with significant sample-to-sample variations. It is a pertinent question if this variability is purely random or to some extent predictable. Here we show, by employing machine learning techniques such as regression neural networks and support vector machines that deformation predictability evolves with strain and crystal size. Using data from discrete dislocations dynamics simulations, the machine learning models are trained to infer the mapping from features of the pre-existing dislocation configuration to the stress-strain curves. The predictability vs strain relation is non-monotonic and exhibits a system size effect: larger systems are more predictable. Stochastic deformation avalanches give rise to fundamental limits of deformation predictability for intermediate strains. However, the large-strain deformation dynamics of the samples can be predicted surprisingly well.

| S-EPMC6294252 | biostudies-literature

Plastic deformation of protein monolayers.

Project description:Globular proteins are peculiar solids that display both local stability of their conformation and the ability to undergo large cooperative changes of shape (conformational changes). If one forces a large deformation of the molecule, such that the structure is necessarily changed, it is not obvious whether the deformed globule can still remain a solid or whether it will melt. Is it possible to plastically deform a protein? Here we investigate this question with a micro-mechanical experiment on a small region (approximately 10 molecules) of a protein monolayer adsorbed on a rigid surface. For the two proteins studied, albumin and myoglobin, we observed that the molecules can be substantially deformed (approximately 1-2 nm deformation) by comparatively small stresses applied for sufficiently long times. The deformation is irreversible, and the protein remains in the solid state (i.e., displays a nonzero shear modulus). The dynamics of the deformation is approximately logarithmic in time, similar to creep in solids. These results show that globular proteins adsorbed on a surface can be plastically deformed.

| S-EPMC1302309 | biostudies-other

Sintering boron carbide ceramics without grain growth by plastic deformation as the dominant densification mechanism.

Project description:A new ceramic sintering approach employing plastic deformation as the dominant mechanism is proposed, at low temperature close to the onset point of grain growth and under high pressure. Based on this route, fully dense boron carbide without grain growth can be prepared at 1,675-1,700 °C and under pressure of (≥) 80 MPa in 5 minutes. The dense boron carbide shows excellent mechanical properties, including Vickers hardness of 37.8 GPa, flexural strength of 445.3 MPa and fracture toughness of 4.7 MPa•m(0.5). Such a process should also facilitate the cost-effective preparation of other advanced ceramics for practical applications.

| S-EPMC4622079 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data