Browse
Submit Data
Databases
API
Help

Dataset Information

18 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Modulated CH₃NH₃PbI_3-xBr_x film for efficient perovskite solar cells exceeding 18.

ABSTRACT: The organic-inorganic lead halide perovskite layer is a crucial factor for the high performance perovskite solar cell (PSC). We introduce CH₃NH₃Br in the precursor solution to prepare CH₃NH₃PbI_3-xBr_x hybrid perovskite, and an uniform perovskite layer with improved crystallinity and apparent grain contour is obtained, resulting in the significant improvement of photovoltaic performance of PSCs. The effects of CH₃NH₃Br on the perovskite morphology, crystallinity, absorption property, charge carrier dynamics and device characteristics are discussed, and the improvement of open circuit voltage of the device depended on Br doping is confirmed. Based on above, the device based on CH₃NH₃PbI_2.86Br_0.14 exhibits a champion power conversion efficiency (PCE) of 18.02%. This study represents an efficient method for high-performance perovskite solar cell by modulating CH₃NH₃PbI_3-xBr_x film.

SUBMITTER: Tu Y

PROVIDER: S-EPMC5355988 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

A Compact and Smooth CH?NH?PbI? Film: Investigation of Solvent Sorts and Concentrations of CH?NH?I towards Highly Efficient Perovskite Solar Cells.

Project description:Four solvents (isopropanol (IPA), n-butyl alcohol (NBA), n-amyl alcohol (NAA), and n-hexyl alcohol (NHA)) were investigated to prepare CH?NH?I (methylammonium iodide, MAI) solutions to transform PbI? film into CH?NH?PbI? (MAPbI?) film. It was found that the morphology of the perovskite MAPbI? film was not only affected by the chain of the solvent molecule, but also by the concentration of MAI. The use of solvents with a long alkyl chain (NAA and NHA) allowed the MAPbI? to grow via an in situ transformation step, which easily made the perovskite films compact, but with a high surface roughness due to the growth of unexpected nanorods/nanoplates. The solvent with a short alkyl chain (IPA) led to the dissolution-crystallization growth mechanism, resulting in rapid generation of perovskite films with a number of pinholes. A high-quality (compact, smooth, pinhole-free) perovskite film was obtained with NBA and an optimized MAI concentration of 8 mg/mL. The corresponding perovskite solar cells achieved a maximum power conversion efficiency (PCE) of 16.66% and average PCE of 14.76% (for 40 cells).

| S-EPMC6265889 | biostudies-other

Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells.

Project description:Organic-inorganic hybrid halide perovskites are proven to be a promising semiconductor material as the absorber layer of solar cells. However, the perovskite films always suffer from nonuniform coverage or high trap state density due to the polycrystalline characteristics, which degrade the photoelectric properties of thin films. Herein, the alkali metal ions which are stable against oxidation and reduction are used in the perovskite precursor solution to induce the process of crystallization and nucleation, then affect the properties of the perovskite film. It is found that the addition of the alkali metal ions clearly improves the quality of perovskite film: enlarges the grain sizes, reduces the defect state density, passivates the grain boundaries, increases the built-in potential (Vbi), resulting to the enhancement in the power conversion efficiency of perovskite thin film solar cell.

| S-EPMC5827644 | biostudies-literature

Thermal assisted oxygen annealing for high efficiency planar CH₃NH₃PbI₃ perovskite solar cells.

Project description:We report investigations on the influences of post-deposition treatments on the performance of solution-processed methylammonium lead triiodide (CH₃NH₃PbI₃)-based planar solar cells. The prepared films were stored in pure N₂ at room temperature or annealed in pure O₂ at room temperature, 45°C, 65°C and 85°C for 12 hours prior to the deposition of the metal electrodes. It is found that annealing in O₂ leads to substantial increase in the power conversion efficiencies (PCEs) of the devices. Furthermore, strong dependence on the annealing temperature for the PCEs of the devices suggests that a thermally activated process may underlie the observed phenomenon. It is believed that the annealing process may facilitate the diffusion of O₂ into the spiro-MeOTAD for inducing p-doping of the hole transport material. Furthermore, the process can result in lowering the localized state density at the grain boundaries as well as the bulk of perovskite. Utilizing thermal assisted O₂ annealing, high efficiency devices with good reproducibility were attained. A PCE of 15.4% with an open circuit voltage (VOC) 1.04 V, short circuit current density (JSC) 23 mA/cm(2), and fill factor 0.64 had been achieved for our champion device.

| S-EPMC4208060 | biostudies-literature

Towards High Performance: Solution-Processed Perovskite Solar Cells with Cu-Doped CH3NH3PbI3.

Project description:Perovskite solar cells (PSCs) have demonstrated remarkable photovoltaic performance, positioning themselves as promising devices in the field. Theoretical calculations suggest that copper (Cu) can serve as an effective dopant, potentially occupying interstitial sites in the perovskite structure, thereby reducing the energy barrier and enhancing carrier extraction. Subsequent experimental investigations confirm that adding CuI as an additive to MAPbI3-based perovskite cells improves optoelectronic properties and overall device performance. Optimizing the amount of Cu (0.01 M) has been found to significantly enhance crystalline quality and grain size, leading to improved light absorption and suppressed carrier recombination. Consequently, the power conversion efficiency (PCE) of Cu-doped PSCs increased from 16.3% to 18.2%. However, excessive Cu doping (0.1 M) negatively impacts morphology, resulting in inferior optical properties and diminished device performance. Furthermore, Cu-doped PSCs exhibit higher stabilized power output (SPO) compared to pristine cells. This study underscores the substantial benefits of Cu doping for advancing the development of highly efficient PSCs.

| S-EPMC10821043 | biostudies-literature

Perovskite Solar Cells Based on Compact, Smooth FA0.1MA0.9PbI3 Film with Efficiency Exceeding 22.

Project description:The utilization of mixed cations is beneficial for taking the advantages of cations and achieving highly efficient perovskite solar cells (PSCs). Herein, the precisely small incorporation of CH(NH2)2 (FA) cations in methyl ammonium lead iodide (MAPbI3) enables the formation of compact, smooth perovskite film with high crystallinity. Consequently, the short-circuit current and the fill factor of the PSCs based on FAxMA1-xPbI3 perovskite are greatly improved, leading to the enhanced device efficiency. The champion PSC based on FA0.1MA0.9PbI3 exhibits a remarkably high efficiency of 22.02%. Furthermore, the PSCs based on FA0.1MA0.9PbI3 perovskite also show improved device stability. This work provides a simple approach to fabricate high-quality perovskite films and high-performance PSCs with better stability.

| S-EPMC7174521 | biostudies-literature

Nonstoichiometric acid-base reaction as reliable synthetic route to highly stable CH3NH3PbI3 perovskite film.

Project description:Perovskite solar cells have received worldwide interests due to swiftly improved efficiency but the poor stability of the perovskite component hampers the device fabrication under normal condition. Herein, we develop a reliable nonstoichiometric acid-base reaction route to stable perovskite films by intermediate chemistry and technology. Perovskite thin-film prepared by nonstoichiometric acid-base reaction route is stable for two months with negligible PbI2-impurity under ?65% humidity, whereas other perovskites prepared by traditional methods degrade distinctly after 2 weeks. Route optimization involves the reaction of PbI2 with excess HI to generate HPbI3, which subsequently undergoes reaction with excess CH3NH2 to deliver CH3NH3PbI3 thin films. High quality of intermediate HPbI3 and CH3NH2 abundance are two important factors to stable CH3NH3PbI3 perovskite. Excess volatile acid/base not only affords full conversion in nonstoichiometric acid-base reaction route but also permits its facile removal for stoichiometric purification, resulting in average efficiency of 16.1% in forward/reverse scans.

| S-EPMC5476796 | biostudies-literature

Instability in CH3NH3PbI3 perovskite solar cells due to elemental migration and chemical composition changes.

Project description:Organic-inorganic halide perovskites have rapidly grown as favorable materials for photovoltaic applications, but accomplishing long-term stability is still a major research problem. This work demonstrates a new insight on instability and degradation factors in CH3NH3PbI3 perovskite solar cells aging with time in open air. X-ray photoelectron spectroscopy (XPS) has been used to investigate the compositional changes caused by device degradation over the period of 1000?hrs. XPS spectra confirm the migration of metallic ions from the bottom electrode (ITO) as a key factor causing the chemical composition change in the perovskite layer besides the diffusion of oxygen. XPS results are in good agreement with the crystallographic marks. Glow discharge optical emission spectrometry (GD-OES) has also been performed on the samples to correlate the XPS results. Based on the experimental results, fundamental features that account for the instability in the perovskite solar cell is discussed.

| S-EPMC5684397 | biostudies-literature

Relationship between ion migration and interfacial degradation of CH3NH3PbI3 perovskite solar cells under thermal conditions.

Project description:Organic-inorganic hybrid perovskite solar cells (PSCs) have been extensively studied because of their outstanding performance: a power conversion efficiency exceeding 22% has been achieved. The most commonly used PSCs consist of CH3NH3PbI3 (MAPbI3) with a hole-selective contact, such as 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenylamine)-9,9-spiro-bifluorene (spiro-OMeTAD), for collecting holes. From the perspective of long-term operation of solar cells, the cell performance and constituent layers (MAPbI3, spiro-OMeTAD, etc.) may be influenced by external conditions like temperature, light, etc. Herein, we report the effects of temperature on spiro-OMeTAD and the interface between MAPbI3 and spiro-OMeTAD in a solar cell. It was confirmed that, at high temperatures (85 °C), I- and CH3NH3+ (MA+) diffused into the spiro-OMeTAD layer in the form of CH3NH3I (MAI). The diffused I- ions prevented oxidation of spiro-OMeTAD, thereby degrading the electrical properties of spiro-OMeTAD. Since ion diffusion can occur during outdoor operation, the structural design of PSCs must be considered to achieve long-term stability.

| S-EPMC5430925 | biostudies-literature

Investigation of Thermally Induced Degradation in CH3NH3PbI3 Perovskite Solar Cells using In-situ Synchrotron Radiation Analysis.

Project description:In this study, we employ a combination of various in-situ surface analysis techniques to investigate the thermally induced degradation processes in MAPbI3 perovskite solar cells (PeSCs) as a function of temperature under air-free conditions (no moisture and oxygen). Through a comprehensive approach that combines in-situ grazing-incidence wide-angle X-ray diffraction (GIWAXD) and high-resolution X-ray photoelectron spectroscopy (HR-XPS) measurements, we confirm that the surface structure of MAPbI3 perovskite film changes to an intermediate phase and decomposes to CH3I, NH3, and PbI2 after both a short (20?min) exposure to heat stress at 100?°C and a long exposure (>1?hour) at 80?°C. Moreover, we observe clearly the changes in the orientation of CH3NH3+ organic cations with respect to the substrate in the intermediate phase, which might be linked directly to the thermal degradation processes in MAPbI3 perovskites. These results provide important progress towards improved understanding of the thermal degradation mechanisms in perovskite materials and will facilitate improvements in the design and fabrication of perovskite solar cells with better thermal stability.

| S-EPMC5498566 | biostudies-literature

High-Switching-Ratio Photodetectors Based on Perovskite CH₃NH₃PbI₃ Nanowires.

Project description:Hybrid organic-inorganic perovskite materials have attracted extensive attention due to their impressive performance in photovoltaic devices. One-dimensional perovskite CH₃NH₃PbI₃ nanomaterials, possessing unique structural features such as large surface-to-volume ratio, anisotropic geometry and quantum confinement, may have excellent optoelectronic properties, which could be utilized to fabricate high-performance photodetectors. However, in comparison to CH₃NH₃PbI₃ thin films, reports on the fabrication of CH₃NH₃PbI₃ nanowires for optoelectrical application are rather limited. Herein, a two-step spin-coating process has been utilized to fabricate pure-phase and single-crystalline CH₃NH₃PbI₃ nanowires on a substrate without mesoporous TiO₂ or Al₂O₃. The size and density of CH₃NH₃PbI₃ nanowires can be easily controlled by changing the PbI₂ precursor concentration. The as-prepared CH₃NH₃PbI₃ nanowires are utilized to fabricate photodetectors, which exhibit a fairly high switching ratio of ~600, a responsivity of 55 mA/W, and a normalized detectivity of 0.5 × 1011 jones under 532 nm light illumination (40 mW/cm²) at a very low bias voltage of 0.1 V. The as-prepared perovskite CH₃NH₃PbI₃ nanowires with excellent optoelectronic properties are regarded to be a potential candidate for high-performance photodetector application.

| S-EPMC5977332 | biostudies-literature