Browse
Submit Data
Databases
API
Help

Dataset Information

20 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Atrazine degradation through PEI-copper nanoparticles deposited onto montmorillonite and sand.

ABSTRACT: We present the synthesis of new composite materials based on copper nanoparticles (Cu NPs) deposited onto montmorillonite (MK10) and quartz sand, for degradation of atrazine, in the context of an advanced oxidation process (AOP). The synthesis involves a first step in which polyethylenimine (PEI) capped Cu NPs (PEI_Cu NPs) are prepared, and then deposited onto, separately, MK10 and sand, through a solvent impregnation method. The resulting products are characterized in detail; the copper is found to exist as a mixture of copper (I, II) oxide. The degradation of atrazine follows a second-order kinetic model with constant values of K₂ = 1.7957 g mg^-1 min^-1 for MK10_PEI_Cu NPs and K₂ = 0.8133 g mg^-1 min^-1 for sand_PEI_Cu NPs. The reaction rate is linked to Cu₂O and CuO redox-active species within the layers, pores and surface of the host materials. A degradation mechanism is found with application of these composite materials in the presence of H₂O₂; adsorption occurs in the absence of H₂O₂. In contrast, the unmodified MK10 and sand exhibit adsorption in both of the above reaction conditions. Finally, the stability of the Cu NPs following degradation is evaluated, and no significant amount of copper leaching is found.

SUBMITTER: Kalidhasan S

PROVIDER: S-EPMC5431096 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Enhanced Antibacterial Activity through Silver Nanoparticles Deposited onto Carboxylated Graphene Oxide Surface.

Project description:The strong bactericidal action of silver nanoparticles (AgNPs) is usually limited by their degree of aggregation. Deposition of AgNPs onto a graphene oxide (GO) surface to generate GO-Ag hybrids has been shown to be an effective method of controlling these aggregation problems. In this sense, a novel carboxylated graphene oxide-silver nanoparticle (GOCOOH-Ag) material has been synthesized, and their antibacterial and biofilm formation inhibitions have been studied. AgNPs decorating the GOCOOH surface achieved an average size of 6.74 ± 0.25 nm, which was smaller than that of AgNPs deposited onto the GO surface. In addition, better distribution of AgNPs was achieved using carboxylated material. It is important to highlight the main role of the carboxylic groups in the nucleation and growth of the AgNPs that decorate the GO-based material surface. In vitro antibacterial activity and antibiofilm-forming action were tested against Gram-positive (Staphylococcus aureus and Staphylococcus epidermidis) and Gram-negative bacteria (Pseudomonas aeruginosa and Escherichia coli). Both GO-Ag and GOCOOH-Ag reduced bacterial growth, analyzed by time-kill curves. However, the minimum inhibitory concentration and the minimum bactericidal concentration of GOCOOH-Ag were lower than those of GO-Ag for all strains studied, indicating that GOCOOH-Ag has better antibacterial activity. In addition, both nanomaterials prevent biofilm formation, with a higher reduction of biofilm mass and cell viability in the presence of GOCOOH-Ag. The carboxylation functionalization in GO-based materials can be applied to improve the bactericidal and antibiofilm-forming action of the AgNPs.

| S-EPMC9228250 | biostudies-literature

Experimental review of PEI electrodeposition onto copper substrates for insulation of complex geometries.

Project description:Polyetherimide (PEI) was used for coating copper substrates via electrophoretic deposition (EPD) for electrical insulation. Different substrate preparation and electrical field application techniques were compared, demonstrating that the use of a pulsed voltage of 20 V allowed for the best formation of insulating coatings in the 2-6 μm thickness range. The results indicate that pulsed EPD is the best technique to effectively coat conductive substrates with superior surface finish coatings that could pass a dielectric withstand test at 10 kV mm-1, which is of importance within the EV automotive industry.

| S-EPMC9042725 | biostudies-literature

Atrazine Desorption Mechanism from an Hydrated Calcium Montmorillonite-A DFT Molecular Dynamics Study.

Project description:Atrazine is one of the most widely used herbicide molecules in the triazine family. Despite its interdiction in the European Union in 2004, atrazine and its main degradation products remain among the most frequently found molecules in freshwater reservoirs in many European Union countries. Our study aims in obtaining insight into the desorption process of atrazine from the main soil absorbent material: clay. Constrained Molecular Dynamics simulations within the Density Functional Theory framework allow us to obtain a free energy desorption profile of atrazine from a Ca2+-montmorillonite surface. The results are interpreted in terms of atrazine inclination to the clay surface and moreover, in terms of hydration states of the cations present in the clay interlayer as well as the hydration state of the atrazine. The desorption mechanism is driven by atrazine alkyl groups and their sizes because of dispersion stabilizing effects. The highest barrier corresponds to the loss of the isopropyl interaction with the surface.

| S-EPMC10855099 | biostudies-literature

Renal clearance and degradation of glutathione-coated copper nanoparticles.

Project description:Degradation of inorganic nanoparticles (NPs) into small molecular complexes is often observed in the physiological environment; however, how this process influences renal clearance of inorganic NPs is largely unknown. By systematically comparing renal clearance of degradable luminescent glutathione coated copper NPs (GS-CuNPs) and their dissociated products, Cu(II)-glutathione disulfide (GSSG) complexes (Cu(II)-GSSG), we found that GS-CuNPs were eliminated through the urinary system surprisingly faster and accumulated in the liver much less than their smaller dissociation counterparts. With assistance of radiochemistry and positron emission tomography (PET) imaging, we found that the observed "nano size" effect in enhancing renal clearance is attributed to the fact that GS-CuNPs are more resistant to serum protein adsorption than Cu(II)-GSSG. In addition, since dissociation of GS-CuNPs follows zero-order chemical kinetics, their renal clearance and biodistribution also depend on initial injection doses and their dissociation processes. Quantitative understanding of size effect and other factors involved in renal clearance and biodistribution of degradable inorganic NPs will lay down a foundation for further development of renal-clearable inorganic NPs with minimized nanotoxicity.

| S-EPMC4955579 | biostudies-literature

Catalytic Activity of Silicon Nanowires Decorated with Gold and Copper Nanoparticles Deposited by Pulsed Laser Ablation.

Project description:Silicon nanowires (SiNWs) decorated by pulsed laser ablation with gold or copper nanoparticles (labeled as AuNPs@SiNWs and CuNPs@SiNWs) were investigated for their catalytic properties. Results demonstrated high catalytic performances in the Caryl-N couplings and subsequent carbonylations for gold and copper catalysts, respectively, that have no precedents in the literature. The excellent activity, attested by the very high turn over number (TON) values, was due both to the uniform coverage along the NW length and to the absence of the chemical shell surrounding the metal nanoparticles (MeNPs). A high recyclability was also observed and can be ascribed to the strong covalent interaction at the Me-Si interface by virtue of metal "silicides" formation.

| S-EPMC5853710 | biostudies-literature

Enhanced Photocatalytic Degradation of Ternary Dyes by Copper Sulfide Nanoparticles.

Project description:We report the effect of thermolysis time on the morphological and optical properties of CuS nanoparticles prepared from Cu(II) dithiocarbamate single-source precursor. The as-prepared copper sulfide nanoparticles were used as photocatalysts for the degradation of crystal violet (CV), methylene blue (MB), rhodamine B (RhB), and a ternary mixture of the three dyes (CV/MB/RhB). Powder XRD patterns confirmed the hexagonal covellite phase for the CuS nanoparticles. At the same time, HRTEM images revealed mixed shapes with a particle size of 31.47 nm for CuS1 prepared at 30 min while CuS2 prepared at 1 h consists of mixtures of hexagonal and nanorods shaped particles with an average size of 21.59 nm. Mixed hexagonal and spherically shaped particles with a size of 17.77 nm were obtained for CuS3 prepared at 2 h. The optical bandgaps of the nanoparticles are 3.00 eV for CuS1, 3.26 eV for CuS2 and 3.13 eV for CuS3. The photocatalytic degradation efficiency showed that CuS3 with the smallest particle size is the most efficient photocatalyst and degraded 85% of CV, 100% of MB, and 81% of RhB. The as-prepared CuS showed good stability and recyclability and also degraded ternary dyes mixture (CV/MB/RhB) effectively. The byproducts of the dye degradation were evaluated using ESI-mass spectrometry.

| S-EPMC8398049 | biostudies-literature

Immobilization of Magnetic Nanoparticles onto Amine-Modified Nano-Silica Gel for Copper Ions Remediation.

Project description:A novel nano-hybrid was synthesized through immobilization of amine-functionalized silica gel nanoparticles with nanomagnetite via a co-precipitation technique. The parameters, such as reagent concentrations, reaction temperature and time, were optimized to accomplish the nano-silica gel chelating matrix. The most proper amine-modified silica gel nanoparticles were immobilized with magnetic nanoparticles. The synthesized magnetic amine nano-silica gel (MANSG) was established and characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Fourier transform infrared (FTIR), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and vibrating sample magnetometry (VSM). The feasibility of MANSG for copper ions' remediation from wastewater was examined. MANSG achieves a 98% copper decontamination from polluted water within 90 min. Equilibrium sorption of copper ions onto MANSG nanoparticles obeyed the Langmuir equation compared to the Freundlich, Temkin, Elovich and Dubinin-Radushkevich (D-R) equilibrium isotherm models. The pseudo-second-order rate kinetics is appropriate to describe the copper sorption process onto the fabricated MANSG.

| S-EPMC5456743 | biostudies-other

Data of interaction of supported ionic liquids phases onto copper nanoparticles: A density functional theory study.

Project description:This work contains data on the computational, structural, and electronic characterization of supported ionic liquids phases anchored to copper nanoparticles using Density Functional theory calculations. The data supplement the paper "Interaction of supported ionic liquids phases onto copper nanoparticles: A Density Functional Theory study" [1], based on the adsorption of ionic liquid onto a Cu nanoparticle is analyzed from a chemical and physical point of view. The chemical analysis is based on Atoms in Molecule theory (AIM) and allows us to differentiate the chemical binding nature between ionic liquid and copper nanoparticle. On the other hand, the energy decomposition analysis based on absolutely localized molecular orbital (ALMO-EDA) describes the physical contributions that govern the interaction between ionic liquid and the copper nanoparticles. Herein, detailed and extended information in the synthesis and computational characterization are presented.

| S-EPMC7708792 | biostudies-literature

Stress, strain and deformation of poly-lactic acid filament deposited onto polyethylene terephthalate woven fabric through 3D printing process.

Project description:Although direct deposition of polymeric materials onto textiles through 3D printing is a great technique used more and more to develop smart textiles, one of the main challenges is to demonstrate equal or better mechanical resistance, durability and comfort than those of the textile substrates before deposition process. This article focuses on studying the impact of the textile properties and printing platform temperature on the tensile and deformations of non-conductive and conductive poly lactic acid (PLA) filaments deposited onto polyethylene terephthalate (PET) textiles through 3D printing process and optimizing them using theoretical and statistical models. The results demonstrate that the deposition process affects the tensile properties of the printed textile in comparison with the ones of the textiles. The stress and strain at rupture of the first 3D printed PLA layer deposited onto PET textile material reveal to be a combination of those of the printed layer and the PET fabric due to the lower flexibility and diffusion of the polymeric printed track through the textile fabric leading to a weak adhesion at the polymer/textile interface. Besides, printing platform temperature and textile properties influence the tensile and deformation properties of the 3D printed PLA on PET textile significantly. Both, the washing process and the incorporation of conductive fillers into the PLA do not affect the tensile properties of the extruded polymeric materials. The elastic, total and permanent deformations of the 3D-printed PLA on PET fabrics are lower than the ones of the fabric before polymer deposition which demonstrates a better dimensional stability, higher stiffness and lower flexibility of these materials.

| S-EPMC6778127 | biostudies-literature

Immobilization of Horseradish Peroxidase onto Montmorillonite/Glucosamine-Chitosan Composite for Electrochemical Biosensing of Polyphenols.

Project description:Glucosamine-chitosan synthesized by the Maillard reaction was combined with montmorillonite to obtain a nanohybrid composite to immobilize horseradish peroxidase. The material combines the advantageous properties of clay with those of the chitosan derivative; has improved water solubility and reduced molecular weight and viscosity; involves an eco-friendly synthesis; and exhibits ion exchange capacity, good adhesiveness, and a large specific surface area for enzyme adsorption. The physicochemical characteristics of the composite were analyzed by infrared spectroscopy and X-ray diffraction to determine clay-polycation interactions. The electrochemical response of the different polyphenols to glassy carbon electrodes modified with the composite was evaluated by cyclic voltammetry. The sensitivity and detection limit values obtained with the biosensor toward hydroquinone, chlorogenic acid, catechol, and resorcinol are (1.6 ± 0.2) × 102 µA mM-1 and (74 ± 8) nM; (1.2 ± 0.1) × 102 µA mM-1 and (26 ± 3) nM; (16 ± 2) µA mM-1 and (0.74 ± 0.09) μM; and (3.7± 0.3) µA mM-1 and (3.3 ± 0.2) μM, respectively. The biosensor was applied to quantify polyphenols in pennyroyal and lemon verbena extracts.

| S-EPMC11201438 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data