Browse
Submit Data
Databases
API
Help

Dataset Information

15 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Tunability of Band Gap and Photoluminescence in CH₃NH₃PbI₃ Films by Anodized Aluminum Oxide Templates.

ABSTRACT: Hybrid organic-inorganic halide CH₃NH₃PbI₃ perovskite films are deposited on anodized aluminum oxide templates with the different pore diameters via one-step spin coating method. The obvious 0.082?eV blue shift of optical band gap is observed in films with decreasing the diameters of pores from 400 to 30?nm. And numerical simulations based on finite element modeling are carried out to represent the absorption edge and consistent with the experiment results. It is interesting that the films show the intense photoluminescence with the excitation intensity of less than 1??W. Moreover, the photoluminescence intensity is increased with increasing pore diameters, which is attributed to the radiative recombination rate of photogenerated electrons and holes. These results pave a way for the further understanding of tunable photophysical properties of perovskite films.

SUBMITTER: Zhang Z

PROVIDER: S-EPMC5432502 | biostudies-literature | 2017 May

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Tunability of Band Gap and Photoluminescence in CH3NH3PbI3 Films by Anodized Aluminum Oxide Templates.

Zhang Zhan Z Wang Min M Ren Lixia L Jin Kexin K

Scientific reports 20170515 1

Hybrid organic-inorganic halide CH3NH3PbI3 perovskite films are deposited on anodized aluminum oxide templates with the different pore diameters via one-step spin coating method. The obvious 0.082 eV blue shift of optical band gap is observed in films with decreasing the diameters of pores from 400 to 30 nm. And numerical simulations based on finite element modeling are carried out to represent the absorption edge and consistent with the experiment results. It is ...[more]

PMID: 28507326

Similar Datasets

Evolution of Photoluminescence, Raman, and Structure of CH3NH3PbI3 Perovskite Microwires Under Humidity Exposure.

Project description:Self-assembled organic-inorganic CH3NH3PbI3 perovskite microwires (MWs) upon humidity exposure along several weeks were investigated by photoluminescence (PL) spectroscopy, Raman spectroscopy, and X-ray diffraction (XRD). We show that, in addition to the common perovskite decomposition into PbI2 and the formation of a hydrated phase, humidity induced a gradual PL redshift at the initial weeks that is stabilized for longer exposure (~?21 nm over the degradation process) and an intensity enhancement. Original perovskite Raman band and XRD reflections slightly shifted upon humidity, indicating defects formation and structure distortion of the MWs crystal lattice. By correlating the PL, Raman, and XRD results, it is believed that the redshift of the MWs PL emission was originated from the structural disorder caused by the incorporation of H2O molecules in the crystal lattice and radiative recombination through moisture-induced subgap trap states. Our study provides insights into the optical and structural response of organic-inorganic perovskite materials upon humidity exposure.

| S-EPMC5842165 | biostudies-literature

Tetragonal CH3NH3PbI3 is ferroelectric.

Project description:Halide perovskite (HaP) semiconductors are revolutionizing photovoltaic (PV) solar energy conversion by showing remarkable performance of solar cells made with HaPs, especially tetragonal methylammonium lead triiodide (MAPbI3). In particular, the low voltage loss of these cells implies a remarkably low recombination rate of photogenerated carriers. It was suggested that low recombination can be due to the spatial separation of electrons and holes, a possibility if MAPbI3 is a semiconducting ferroelectric, which, however, requires clear experimental evidence. As a first step, we show that, in operando, MAPbI3 (unlike MAPbBr3) is pyroelectric, which implies it can be ferroelectric. The next step, proving it is (not) ferroelectric, is challenging, because of the material's relatively high electrical conductance (a consequence of an optical band gap suitable for PV conversion) and low stability under high applied bias voltage. This excludes normal measurements of a ferroelectric hysteresis loop, to prove ferroelectricity's hallmark switchable polarization. By adopting an approach suitable for electrically leaky materials as MAPbI3, we show here ferroelectric hysteresis from well-characterized single crystals at low temperature (still within the tetragonal phase, which is stable at room temperature). By chemical etching, we also can image the structural fingerprint for ferroelectricity, polar domains, periodically stacked along the polar axis of the crystal, which, as predicted by theory, scale with the overall crystal size. We also succeeded in detecting clear second harmonic generation, direct evidence for the material's noncentrosymmetry. We note that the material's ferroelectric nature, can, but need not be important in a PV cell at room temperature.

| S-EPMC5514731 | biostudies-literature

CH3NH3PbI3 perovskites: Ferroelasticity revealed.

Project description:Ferroelectricity has been proposed as a plausible mechanism to explain the high photovoltaic conversion efficiency in organic-inorganic perovskites; however, convincing experimental evidence in support of this hypothesis is still missing. Identifying and distinguishing ferroelectricity from other properties, such as piezoelectricity, ferroelasticity, etc., is typically nontrivial because these phenomena can coexist in many materials. In this work, a combination of microscopic and nanoscale techniques provides solid evidence for the existence of ferroelastic domains in both CH3NH3PbI3 polycrystalline films and single crystals in the pristine state and under applied stress. Experiments show that the configuration of CH3NH3PbI3 ferroelastic domains in single crystals and polycrystalline films can be controlled with applied stress, suggesting that strain engineering may be used to tune the properties of this material. No evidence of concomitant ferroelectricity was observed. Because grain boundaries have an impact on the long-term stability of organic-inorganic perovskite devices, and because the ferroelastic domain boundaries may differ from regular grain boundaries, the discovery of ferroelasticity provides a new variable to consider in the quest for improving their stability and enabling their widespread adoption.

| S-EPMC5392022 | biostudies-literature

Alkali Metal Doping for Improved CH3NH3PbI3 Perovskite Solar Cells.

Project description:Organic-inorganic hybrid halide perovskites are proven to be a promising semiconductor material as the absorber layer of solar cells. However, the perovskite films always suffer from nonuniform coverage or high trap state density due to the polycrystalline characteristics, which degrade the photoelectric properties of thin films. Herein, the alkali metal ions which are stable against oxidation and reduction are used in the perovskite precursor solution to induce the process of crystallization and nucleation, then affect the properties of the perovskite film. It is found that the addition of the alkali metal ions clearly improves the quality of perovskite film: enlarges the grain sizes, reduces the defect state density, passivates the grain boundaries, increases the built-in potential (Vbi), resulting to the enhancement in the power conversion efficiency of perovskite thin film solar cell.

| S-EPMC5827644 | biostudies-literature

Direct observation of intrinsic twin domains in tetragonal CH3NH3PbI3.

Project description:Organic-inorganic hybrid perovskites are exciting candidates for next-generation solar cells, with CH3NH3PbI3 being one of the most widely studied. While there have been intense efforts to fabricate and optimize photovoltaic devices using CH3NH3PbI3, critical questions remain regarding the crystal structure that governs its unique properties of the hybrid perovskite material. Here we report unambiguous evidence for crystallographic twin domains in tetragonal CH3NH3PbI3, observed using low-dose transmission electron microscopy and selected area electron diffraction. The domains are around 100-300 nm wide, which disappear/reappear above/below the tetragonal-to-cubic phase transition temperature (approximate 57 °C) in a reversible process that often 'memorizes' the scale and orientation of the domains. Since these domains exist within the operational temperature range of solar cells, and have dimensions comparable to the thickness of typical CH3NH3PbI3 films in the solar cells, understanding the twin geometry and orientation is essential for further improving perovskite solar cells.

| S-EPMC5331338 | biostudies-literature

Exceptionally Stable CH3NH3PbI3 Films in Moderate Humid Environmental Condition.

Project description:An unprecedentedly stable CH3NH3PbI3 film synthesized by a modified chemical vapor transport method is demonstrated. The results show that the crystal structure, light absorption, and device efficiency do not degrade after storing for 100 d in air with 40% relative humidity, while the conventional solution-processed perovskites are usually stable for less than 20 d in similar conditions.

| S-EPMC5054937 | biostudies-literature

Atomic-scale imaging of CH3NH3PbI3 structure and its decomposition pathway.

Project description:Understanding the atomic structure and structural instability of organic-inorganic hybrid perovskites is the key to appreciate their remarkable photoelectric properties and understand failure mechanism. Here, using low-dose imaging technique by direct-detection electron-counting camera in a transmission electron microscope, we investigate the atomic structure and decomposition pathway of CH3NH3PbI3 (MAPbI3) at the atomic scale. We successfully image the atomic structure of perovskite in real space under ultra-low electron dose condition, and observe a two-step decomposition process, i.e., initial loss of MA+ followed by the collapse of perovskite structure into 6H-PbI2 with their critical threshold doses also determined. Interestingly, an intermediate phase (MA0.5PbI3) with locally ordered vacancies can robustly exist before perovskite collapses, enlightening strategies for prevention and recovery of perovskite structure during the degradation. Associated with the structure evolution, the bandgap gradually increases from ~1.6 eV to ~2.1 eV. In addition, it is found that C-N bonds can be readily destroyed under irradiation, releasing NH3 and HI and leaving hydrocarbons. These findings enhance our understanding of the photoelectric properties and failure mechanism of MAPbI3, providing potential strategies into material optimization.

| S-EPMC8448763 | biostudies-literature

Role of the Iodide-Methylammonium Interaction in the Ferroelectricity of CH3 NH3 PbI3.

Project description:Excellent conversion efficiencies of over 20?% and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH3 NH3 PbI3 being an archetypal compound. The question why CH3 NH3 PbI3 has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non-centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long-range level. Although the molecular cation CH3 NH3 + is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.

| S-EPMC6972664 | biostudies-literature

Hot carrier extraction in CH3NH3PbI3 unveiled by pump-push-probe spectroscopy.

Project description:Halide perovskites are promising materials for development in hot carrier (HC) solar cells, where the excess energy of above-bandgap photons is harvested before being wasted as heat to enhance device efficiency. Presently, HC separation and transfer processes at higher-energy states remain poorly understood. Here, we investigate the excited state dynamics in CH3NH3PbI3 using pump-push-probe spectroscopy. It has its intrinsic advantages for studying these dynamics over conventional transient spectroscopy, albeit complementary to one another. By exploiting the broad excited-state absorption characteristics, our findings reveal the transfer of HCs from these higher-energy states into bathophenanthroline (bphen), an energy selective organic acceptor far above perovskite's band edges. Complete HC extraction is realized only after overcoming the interfacial barrier formed at the heterojunction, estimated to be between 1.01 and 1.08 eV above bphen's lowest unoccupied molecular orbital level. The insights gained here are essential for the development of a new class of optoelectronics.

| S-EPMC6858252 | biostudies-literature

Fabrication of CH₃NH₃PbI₃/PVP Composite Fibers via Electrospinning and Deposition.

Project description:In our study, one-dimensional PbI₂/polyvinylpyrrolidone (PVP) composition fibers have been prepared by using PbI₂ and PVP as precursors dissolved in N,N-dimethylformamide via a electrospinning process. Dipping the fibers into CH₃NH₃I solution changed its color, indicating the formation of CH₃NH₃PbI₃, to obtain CH₃NH₃PbI₃/PVP composite fibers. The structure, morphology and composition of the all as-prepared fibers were characterized by using X-ray diffraction and scanning electron microscopy.

| S-EPMC5455475 | biostudies-other