Browse
Submit Data
Databases
API
Help

Dataset Information

30 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Enhanced thermal conductivity of epoxy composites filled with silicon carbide nanowires.

ABSTRACT: In this study, we report a facile approach to fabricate epoxy composite incorporated with silicon carbide nanowires (SiC NWs). The thermal conductivity of epoxy/SiC NWs composites was thoroughly investigated. The thermal conductivity of epoxy/SiC NWs composites with 3.0 wt% filler reached 0.449 Wm^-1 K^-1, approximately a 106% enhancement as compared to neat epoxy. In contrast, the same mass fraction of silicon carbide micron particles (SiC MPs) incorporated into epoxy matrix showed less improvement on thermal conduction properties. This is attributed to the formation of effective heat conduction pathways among SiC NWs as well as a strong interaction between the nanowires and epoxy matrix. In addition, the thermal properties of epoxy/SiC NWs composites were also improved. These results demonstrate that we developed a novel approach to enhance the thermal conductivity of the polymer composites which meet the requirement for the rapid development of the electronic devices.

SUBMITTER: Shen D

PROVIDER: S-EPMC5453999 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Vertically Aligned Silicon Carbide Nanowires/Boron Nitride Cellulose Aerogel Networks Enhanced Thermal Conductivity and Electromagnetic Absorbing of Epoxy Composites.

Project description:With the innovation of microelectronics technology, the heat dissipation problem inside the device will face a severe test. In this work, cellulose aerogel (CA) with highly enhanced thermal conductivity (TC) in vertical planes was successfully obtained by constructing a vertically aligned silicon carbide nanowires (SiC NWs)/boron nitride (BN) network via the ice template-assisted strategy. The unique network structure of SiC NWs connected to BN ensures that the TC of the composite in the vertical direction reaches 2.21 W m-1 K-1 at a low hybrid filler loading of 16.69 wt%, which was increased by 890% compared to pure epoxy (EP). In addition, relying on unique porous network structure of CA, EP-based composite also showed higher TC than other comparative samples in the horizontal direction. Meanwhile, the composite exhibits good electrically insulating with a volume electrical resistivity about 2.35 × 1011 Ω cm and displays excellent electromagnetic wave absorption performance with a minimum reflection loss of - 21.5 dB and a wide effective absorption bandwidth (< - 10 dB) from 8.8 to 11.6 GHz. Therefore, this work provides a new strategy for manufacturing polymer-based composites with excellent multifunctional performances in microelectronic packaging applications.

| S-EPMC9056589 | biostudies-literature

Enhanced thermal conductivity of epoxy composites filled with tetrapod-shaped ZnO.

Project description:Epoxy composites with ZnO powders characterized by different structures as inclusion are prepared and their thermal properties are studied. The experimental results demonstrate that the epoxy resins filled by tetrapod-shaped ZnO (T-ZnO) whiskers have the superior thermal transport property in comparison to ZnO micron particles (ZnO MPs). The thermal conductivity of ZnO/epoxy and T-ZnO/epoxy composites in different mass fraction (10, 20, 30, 40, 50 wt%) are respectively investigated and the suitable models are compared to explain the enhancement effect of thermal conductivity. The thermal conductivity of T-ZnO/epoxy composites with 50 wt% filler reaches 4.38 W m-1 K-1, approximately 1816% enhancement as compared to neat epoxy. In contrast, the same mass fraction of ZnO MPs are incorporated into epoxy matrix showed less improvement on thermal conduction properties. This is because T-ZnO whiskers act as a thermal conductance bridge in the epoxy matrix. In addition, the other thermal properties of T-ZnO/epoxy composites are also improved. Furthermore, the T-ZnO/epoxy composite also presents a much reduced coefficient of thermal expansion (∼28.1 ppm K-1) and increased glass transition temperature (215.7 °C). This strategy meets the requirement for the rapid development of advanced electronic packaging.

| S-EPMC9079263 | biostudies-literature

Enhanced Thermal Conductivity of Epoxy Composites Filled with Al2O3/Boron Nitride Hybrids for Underfill Encapsulation Materials.

Project description:In this study, a thermal conductivity of 0.22 W·m-1·K-1 was obtained for pristine epoxy (EP), and the impact of a hybrid filler composed of two-dimensional (2D) flake-like boron nitride (BN) and zero-dimensional (0D) spherical micro-sized aluminum oxide (Al2O3) on the thermal conductivity of epoxy resin was investigated. With 80 wt.% hybrid Al2O3-BN filler contents, the thermal conductivity of the EP composite reached 1.72 W·m-1·K-1, increasing approximately 7.8-fold with respect to the pure epoxy matrix. Furthermore, different important properties for the application were analyzed, such as Fourier-transform infrared (FTIR) spectra, viscosity, morphology, coefficient of thermal expansion (CTE), glass transition temperature (Tg), decomposition temperature (Td), dielectric properties, and thermal infrared images. The obtained thermal performance is suitable for specific electronic applications such as flip-chip underfill packaging.

| S-EPMC7795928 | biostudies-literature

Enhanced Thermal Conductivity of Epoxy Composites Filled with 2D Transition Metal Carbides (MXenes) with Ultralow Loading.

Project description:With the development of electronic devices such as integrated circuits toward the continual increase in power density and consumption, the efficient heat dissipation and low thermal expansion of materials become one of the most important issue. However, conventional polymers have the problem of poor thermal dissipation performance, which hinder application for electronic devices. In this work, the two-dimensional material, MXene (Ti3C2), is used as the reinforcement additive to optimize the thermal properties of polymers. We reported the preparation of multilayer Ti3C2 MXene by HF etching method and obtained few-layer Ti3C2 MXene by simple ultrasonication. Meanwhile, Ti3C2/epoxy composites were prepared by a solution blending method. The results show that the thermal properties of the composites are improved in comparison with the neat epoxy. Thermal conductivity value (0.587 W/mK) of epoxy composite with only 1.0 wt% Ti3C2 MXene fillers, is increased by 141.3% compared with that of neat epoxy. In addition, the composite presents an increased glass transition temperature, high thermal stability and lower coefficient of thermal expansion. This work is of great significance for the research of high-performance composite materials.

| S-EPMC6591414 | biostudies-literature

Thermal Conductivity of Epoxy Resin Composites Filled with Combustion Synthesized h-BN Particles.

Project description:The thermal conductivity of epoxy resin composites filled with combustion-synthesized hexagonal boron nitride (h-BN) particles was investigated. The mixing of the composite constituents was carried out by either a dry method (involving no use of solvent) for low filler loadings or a solvent method (using acetone as solvent) for higher filler loadings. It was found that surface treatment of the h-BN particles using the silane 3-glycidoxypropyltrimethoxysilane (GPTMS) increases the thermal conductivity of the resultant composites in a lesser amount compared to the values reported by other studies. This was explained by the fact that the combustion synthesized h-BN particles contain less -OH or active sites on the surface, thus adsorbing less amounts of GPTMS. However, the thermal conductivity of the composites filled with the combustion synthesized h-BN was found to be comparable to that with commercially available h-BN reported in other studies. The thermal conductivity of the composites was found to be higher when larger h-BN particles were used. The thermal conductivity was also found to increase with increasing filler content to a maximum and then begin to decrease with further increases in this content. In addition to the effect of higher porosity at higher filler contents, more horizontally oriented h-BN particles formed at higher filler loadings (perhaps due to pressing during formation of the composites) were suggested to be a factor causing this decrease of the thermal conductivity. The measured thermal conductivities were compared to theoretical predictions based on the Nielsen and Lewis theory. The theoretical predictions were found to be lower than the experimental values at low filler contents (< 60 vol %) and became increasing higher than the experimental values at high filler contents (> 60 vol %).

| S-EPMC6273151 | biostudies-literature

Enhanced Thermal Conductivity of Polymer Composite by Adding Fishbone-like Silicon Carbide.

Project description:The rapid development of chip technology has all put forward higher requirements for highly thermally conductive materials. In this work, a new type of material of Fishbone-like silicon carbide (SiC) material was used as the filler in a polyvinylidene fluoride (PVDF) matrix. The silicon carbide/polyvinylidene fluoride (SiC/PVDF) composites were successfully prepared with different loading by a simple mixing method. The thermal conductivity of SiC/PVDF composite reached 0.92 W m-1 K-1, which is 470% higher than that of pure polymer. The results show that using the filler with a new structure to construct thermal conductivity networks is an effective way to improve the thermal conductivity of PVDF. This work provides a new idea for the further application in the field of electronic packaging.

| S-EPMC8620080 | biostudies-literature

Enhanced Thermal Conductivity of Silicone Composites Filled with Few-Layered Hexagonal Boron Nitride.

Project description:In this study, we demonstrate the use of silicone/few-layered hexagonal boron nitride (FL-hBN) composites for heat dissipation applications. FL-hBN is synthesized via a green, facile, low-cost and scalable liquid exfoliation method using a jet cavitation process. The crystal structures, surface morphologies and specific surface areas of pristine h-BN and FL-hBN were characterized by XRD, SEM, TEM and AFM (atomic force microscopy). The results confirmed that FL-hBN with a thickness of ~4 nm was successfully obtained from the exfoliation process. In addition, we introduced both pristine h-BN and FL-hBN into silicone with different ratios to study their thermal properties. The results of the laser flash analysis indicate that the silicon/FL-hBN composite exhibited a higher thermal conductivity than that of the silicone/h-BN composite. With the optimal loading content of 30 wt.% FL-hBN content, the thermal conductivity of the composite could be enhanced to 230%, which is higher than that of silicone/h-BN (189%). These results indicate that jet cavitation is an effective and swift way to obtain few-layered hexagonal boron nitride that could effectively enhance the thermal conductivity of silicone composites.

| S-EPMC7570332 | biostudies-literature

Improving thermal conductivity of Al/SiC composites by post-oxidization of reaction-bonded silicon carbide preforms.

Project description:High thermal conductivity aluminium-based silicon carbide (Al/SiC) composites were successfully fabricated through post-oxidization of reaction-bonded silicon carbide preforms (RS preforms), utilizing vacuum pressure infiltration technology. The study investigated the regulation of interfacial reactions in conventional sintering and reaction sintering. Conventional sintering introduced a large amount of SiO2, which negatively impacted the thermal conductivity of the Al/SiC composite, but the reaction sintering not. The proposed post-oxidization treatment of RS preforms effectively removed residual carbon from the SiC particle surfaces, thereby forestalling the formation of Al4C3. Furthermore, the post-oxidization treatment effectively formed lightweight SiO2 deposits onto the surface of SiC particles, improving Al-SiC interfacial wettability and reducing thermal resistance, thereby enhancing composite thermal conductivity. Notably, the thermal conductivity of the post-oxidized sample exhibited an increase of 6.5% compared to the untreated sample. The study also evaluated the impact of particle size distribution on volume fraction and thermal properties. The optimized Al/SiC composites yielded thermal conductivity, coefficient of thermal expansion, bending strength, and Young's modulus values of 237.3 W/m K, 8.5 × 10-6/°C, 325 MPa, and 75.9 GPa, respectively.

| S-EPMC11258292 | biostudies-literature

Simultaneously Enhanced Thermal Conductivity and Dielectric Breakdown Strength in Sandwich AlN/Epoxy Composites.

Project description:Polymer-based composites with high thermal conductivity and dielectric breakdown strength have gained increasing attention due to their significant application potential in both power electronic devices and power equipment. In this study, we successfully prepared novel sandwich AlN/epoxy composites with various layer thicknesses, showing simultaneously and remarkably enhanced dielectric breakdown strength and thermal conductivity. The most optimized sandwich composite, with an outer layer thickness of 120 μm and an inner layer thickness of 60 μm (abbreviated as 120-60) exhibits a high through-plane thermal conductivity of 0.754 W/(m·K) (4.1 times of epoxy) and has a dielectric breakdown strength of 69.7 kV/mm, 8.1% higher compared to that of epoxy. The sandwich composites also have higher in-plane thermal conductivity (1.88 W/(m·K) for 120-60) based on the novel parallel models. The sandwich composites with desirable thermal and electrical properties are very promising for application in power electronic devices and power equipment.

| S-EPMC8401393 | biostudies-literature

Thermal Conductivity and Cure Kinetics of Epoxy-Boron Nitride Composites-A Review.

Project description:Epoxy resin composites filled with thermally conductive but electrically insulating particles play an important role in the thermal management of modern electronic devices. Although many types of particles are used for this purpose, including oxides, carbides and nitrides, one of the most widely used fillers is boron nitride (BN). In this review we concentrate specifically on epoxy-BN composites for high thermal conductivity applications. First, the cure kinetics of epoxy composites in general, and of epoxy-BN composites in particular, are discussed separately in terms of the effects of the filler particles on cure parameters and the cured composite. Then, several fundamental aspects of epoxy-BN composites are discussed in terms of their effect on thermal conductivity. These aspects include the following: the filler content; the type of epoxy system used for the matrix; the morphology of the filler particles (platelets, agglomerates) and their size and concentration; the use of surface treatments of the filler particles or of coupling agents; and the composite preparation procedures, for example whether or not solvents are used for dispersion of the filler in the matrix. The dependence of thermal conductivity on filler content, obtained from over one hundred reports in the literature, is examined in detail, and an attempt is made to categorise the effects of the variables and to compare the results obtained by different procedures.

| S-EPMC7476057 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data