Dataset Information

Arthroscopic Removal of Proximal Humerus Plates in Chronic Post-traumatic Shoulder Stiffness.

ABSTRACT: Proximal humerus fracture fixation may be complicated by persistent postsurgical stiffness or implant-related problems. Arthroscopic plate removal is a cosmetic and functionally beneficial procedure; however, the procedure is technically difficult in the presence of severe subdeltoid scarring. The technique described here shows an arthroscopic subdeltoid adhesiolysis and proximal humerus plate removal using systematic access to 5 regions of screw positions on the plate. After initial glenohumeral adhesiolysis, a thorough subacromial and subdeltoid bursectomy is performed. The axillary nerve and deltoid are retracted via an anterosuperolateral portal, and a posterolateral portal is used for panoramic viewing along the plate length. Lateral portals are placed above and below the axillary nerve, and these are used for screw removal. Finally, the plate is removed via a 1-inch incision along the previous surgical scar. The technique is cosmetic and minimally invasive, and early rehabilitation restores range of motion and strength. Technical tips for safe dissection in the scarred subdeltoid space and guidelines for protection of neurovascular structures are presented.

SUBMITTER: Bhatia DN

PROVIDER: S-EPMC5462709 | biostudies-literature | 2017 Apr

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Arthroscopic Removal of Proximal Humerus Plates in Chronic Post-traumatic Shoulder Stiffness.

Bhatia Deepak N DN

Arthroscopy techniques 20170327 2

Proximal humerus fracture fixation may be complicated by persistent postsurgical stiffness or implant-related problems. Arthroscopic plate removal is a cosmetic and functionally beneficial procedure; however, the procedure is technically difficult in the presence of severe subdeltoid scarring. The technique described here shows an arthroscopic subdeltoid adhesiolysis and proximal humerus plate removal using systematic access to 5 regions of screw positions on the plate. After initial glenohumera ...[more]

PMID: 28626630

Similar Datasets

Project description:PurposeTo investigate the clinical outcomes following the arthroscopic removal of proximal humerus locking plates for symptomatic hardware after open reduction and internal fixation (ORIF) of proximal humerus fractures.MethodsPatients who underwent arthroscopic removal of hardware (ROH) with capsular release due to pain and/or immobility after receiving locking plates to treat proximal humerus fractures from 2009 to 2016 were identified. Operative and clinic records were reviewed to obtain demographic information, concomitant procedures during ROH, and pre- and postoperative active shoulder range of motion. Postoperative patient-reported outcomes included the QuickDASH, PROMIS Pain Intensity, Constant, and University of California, Los Angeles shoulder rating scale.ResultsIn total, 88 patients were included. Patients were evaluated at a minimum of 6 weeks postoperatively after ROH. Patients with pre- and postoperative active range of motion values demonstrated significant improvements in mean forward elevation (n = 69; 78.4%; 115.1° to 152.1°, P < .001), abduction (n = 29; 33.0%; 70.9° to 138.7°, P < .001), external rotation (n = 49; 55.7%; 43.7° to 58.6°, P = .012), and internal rotation (n = 45; 51.1%; 25.7° to 61.9°, P < .001). Patients also reported positive patient-reported scores, including the QuickDASH (4.1 ± 7.8), PROMIS Pain Intensity (3.5 ± 0.9), Constant (84.6 ± 10.7), and University of California, Los Angeles shoulder rating scale (33 ± 2.9), which were measured 70.6 ± 26.6 months postoperatively. There were no surgical complications, no arthroscopic cases were converted to open, but 2 reported refractures (2.3%).ConclusionsArthroscopic-assisted removal of proximal humerus locking plates significantly improves motion and function while allowing for management of concomitant shoulder pathology and potentially avoiding open surgery complications. Given that patients undergoing this procedure frequently have multiple comorbidities, arthroscopic-assisted removal with smaller incisions may minimize risks while restoring shoulder mobility. Therefore, arthroscopic ROH for patients experiencing symptomatic hardware after ORIF is recommended.Level of evidenceLevel IV, therapeutic case series.

Project description:BackgroundPosttraumatic shoulder stiffness remains a problem after proximal humerus fracture (PHF) despite good healing rates. The aim of this pilot study was to determine whether the implant material and overlying soft tissue have an effect on shoulder range of motion (ROM) before and after implant removal (IR).Methods16 patients (mean age 55.2 ± 15.3 (SD) years; 62.5% female) were included who underwent operative treatment with locking plates of either carbon fiber reinforced Polyetheretherketone (PEEK) (PEEKPower® humeral fracture plate, Arthrex, Naples, Florida, USA, n = 8) or titanium alloy (Ti) (Philos®, DePuy Synthes, Johnson & Johnson Medical, Raynham, Massachusetts, USA, n = 8) for PHF. All patients presented with a limited ROM and persistent pain in everyday life after the fracture had healed, whereupon IR was indicated. ROM before and after IR were compared as well as the Constant Score (CS) and the CS compared to the contralateral shoulder (%CS) 1 year after IR.ResultsIn group PEEK, elevation was 116.3° ± 19.2° pre- and 129.4° ± 23.7° post-IR (p = 0.027). External rotation was 35.0° ± 7.6° pre- and 50.6° ± 21.8° post-IR (p = 0.041). External rotation with the humerus abducted 90° was 38.8° ± 18.1° pre- and 52.5° ± 25.5° post-IR (p = 0.024). In group Ti, elevation was 110.0° ± 34.6° pre- and 133.8° ± 31.1° post-IR (p = 0.011). External rotation with the humerus at rest was 33.8° ± 23.1° pre- and 48.8° ± 18.7° post-IR (p = 0.048). External rotation with the humerus abducted 90° was 40.0° ± 31.6° pre- and 52.5° ± 22.5° post-IR (p = 0.011). Comparison of the two implant materials showed no significant difference. The overall CS was 90.3 ± 8.8, the %CS was 91.8% ± 14.7%.ConclusionThere was no significant difference in ROM, CS and %CS with respect to plate materials, although lower cell adhesion is reported for the hydrophobic PEEK. However, all patients showed improved functional outcomes after IR in this pilot study. In patients with shoulder stiffness following locked plating for PHF, implants should be removed and open arthrolysis should be performed, independently from the hardware material.Level of evidenceII.

Project description:Joint-preserving surgical treatment of complex unstable proximal humerus fractures remains challenging, with high failure rates even following state-of-the-art locked plating. Enhancement of implants could help improve outcomes. By overcoming limitations of conventional biomechanical testing, finite element (FE) analysis enables design optimization but requires stringent validation. This study aimed to computationally enhance the design of an existing locking plate to provide superior fixation stability and evaluate the benefit experimentally in a matched-pair fashion. Further aims were the evaluation of instrumentation accuracy and its potential influence on the specimen-specific predictive ability of FE. Screw trajectories of an existing commercial plate were adjusted to reduce the predicted cyclic cut-out failure risk and define the enhanced (EH) implant design based on results of a previous parametric FE study using 19 left proximal humerus models (Set A). Superiority of EH versus the original (OG) design was tested using nine pairs of human proximal humeri (N = 18, Set B). Specimen-specific CT-based virtual preoperative planning defined osteotomies replicating a complex 3-part fracture and fixation with a locking plate using six screws. Bone specimens were prepared, osteotomized and instrumented according to the preoperative plan via a standardized procedure utilizing 3D-printed guides. Cut-out failure of OG and EH implant designs was compared in paired groups with both FE analysis and cyclic biomechanical testing. The computationally enhanced implant configuration achieved significantly more cycles to cut-out failure compared to the standard OG design (p < 0.01), confirming the significantly lower peri-implant bone strain predicted by FE for the EH versus OG groups (p < 0.001). The magnitude of instrumentation inaccuracies was small but had a significant effect on the predicted failure risk (p < 0.01). The sample-specific FE predictions strongly correlated with the experimental results (R2 = 0.70) when incorporating instrumentation inaccuracies. These findings demonstrate the power and validity of FE simulations in improving implant designs towards superior fixation stability of proximal humerus fractures. Computational optimization could be performed involving further implant features and help decrease failure rates. The results underline the importance of accurate surgical execution of implant fixations and the need for high consistency in validation studies.

Dataset Information

Arthroscopic Removal of Proximal Humerus Plates in Chronic Post-traumatic Shoulder Stiffness.

Publications

Arthroscopic Removal of Proximal Humerus Plates in Chronic Post-traumatic Shoulder Stiffness.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets