Browse
Submit Data
Databases
API
Help

Dataset Information

13 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

A method for rapid 3D scanning and replication of large paleontological specimens.

ABSTRACT: We demonstrate a fast and cost-effective technique to perform three dimensional (3D) scanning and replication of large paleontological specimens, in this case the entire skull of a Tyrannosaurus rex (T.rex) with a volume in the range of 2 m3. The technique involves time-of-flight (TOF) depth sensing using the Kinect scanning module commonly used in gesture recognition in gaming. Raw data from the Kinect sensor was captured using open source software and the reconstruction was done rapidly making this a viable method that can be adopted by museums and researchers in paleontology. The current method has the advantage of being low-cost as compared to industrial scanners and photogrammetric methods but also of accurately scanning a substantial volume range which is well suited for large specimens. The depth resolution from the Kinect sensor was measured to be around 0.6 mm which is ideal for scanning large specimens with reasonable structural detail. We demonstrate the efficacy of this method on the skull of FMNH PR 2081, also known as SUE, a near complete T.rex at the Field Museum of Natural History.

SUBMITTER: Das AJ

PROVIDER: S-EPMC5497938 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

MIA-Clustering: a novel method for segmentation of paleontological material.

Project description:Paleontological research increasingly uses high-resolution micro-computed tomography (μCT) to study the inner architecture of modern and fossil bone material to answer important questions regarding vertebrate evolution. This non-destructive method allows for the measurement of otherwise inaccessible morphology. Digital measurement is predicated on the accurate segmentation of modern or fossilized bone from other structures imaged in μCT scans, as errors in segmentation can result in inaccurate calculations of structural parameters. Several approaches to image segmentation have been proposed with varying degrees of automation, ranging from completely manual segmentation, to the selection of input parameters required for computational algorithms. Many of these segmentation algorithms provide speed and reproducibility at the cost of flexibility that manual segmentation provides. In particular, the segmentation of modern and fossil bone in the presence of materials such as desiccated soft tissue, soil matrix or precipitated crystalline material can be difficult. Here we present a free open-source segmentation algorithm application capable of segmenting modern and fossil bone, which also reduces subjective user decisions to a minimum. We compare the effectiveness of this algorithm with another leading method by using both to measure the parameters of a known dimension reference object, as well as to segment an example problematic fossil scan. The results demonstrate that the medical image analysis-clustering method produces accurate segmentations and offers more flexibility than those of equivalent precision. Its free availability, flexibility to deal with non-bone inclusions and limited need for user input give it broad applicability in anthropological, anatomical, and paleontological contexts.

| S-EPMC5826037 | biostudies-literature

A rapid and cost-effective pipeline for digitization of museum specimens with 3D photogrammetry.

Project description:Natural history collections are yielding more information as digitization brings specimen data to researchers, connects specimens across museums, and as new technologies allow for more large-scale data collection. Therefore, a key goal in specimen digitization is developing methods that both increase access and allow for the highest yield of phenomic data. 3D digitization is increasingly popular because it has the potential to meet both aspects of that key goal. However, current methods overlook or do not prioritize some of the most sought-after phenotypic traits, those involving the external appearance of specimens, especially color. Here, we introduce an efficient and cost-effective pipeline for 3D photogrammetry to capture the external appearance of natural history specimens and other museum objects. 3D photogrammetry aligns and compares sets of dozens, hundreds, or even thousands of photos to create 3D models. The hardware set-up requires little physical space and around $3,000 in initial investment, while the software pipeline requires $1,400/year for proprietary software subscriptions (with open-source alternatives). The creation of each 3D model takes 1-2 hours/specimen and much of the software pipeline is automated with minimal supervision required, including the onerous step of mesh processing. We showcase the method by creating 3D models for most of the type specimens in the Moore Laboratory of Zoology bird collection and show that digital bill measurements are comparable to hand-taken measurements. Color data, while not included as part of this pipeline, is easily extractable from the models and one of the most promising areas of data collection. Future advances can adapt the method for ultraviolet reflectance capture and increased efficiency and model quality. Combined with genomic data, phenomic data from 3D models including photogrammetry will open new doors to understanding organismal evolution.

| S-EPMC7425849 | biostudies-literature

Large-scale 3D imaging of mouse cochlea using serial block-face scanning electron microscopy.

Project description:This protocol describes how to prepare intact mouse cochleae for serial block-face scanning electron microscopy (SBEM). The detailed workflow includes cochlea fixation, en bloc staining, resin embedding, X-ray microscopy-guided trimming and SBEM data acquisition. This protocol allows large-scale, nanometer-resolution three-dimensional imaging of subcellular structures in a targeted tonotopic range of the cochlea and enables fast volumetric scan at submicron resolution using a compact X-ray microscope. For complete details on the use and execution of this protocol, please refer to Hua et al. (2021).

| S-EPMC8121772 | biostudies-literature

Rapid 3D radiofrequency field mapping using catalyzed double-angle method.

Project description:A new method is presented for rapid and accurate large volumetric radiofrequency (RF) field (B(1) (+)) mapping. This method is a modification of the double-angle method (DAM), which accelerates imaging speed and applies 3D acquisition to improve B(1) (+) measurement accuracy. It reduces repetition time and scan time by introducing a catalyzation RF pulse chain at the end of each DAM repetition cycle. The catalyzation pulse chain ensures that, after each TR period, the longitudinal magnetizations reach the same state for both measurements at two flip angles for the DAM so that the long TR requirement (TR >or= 5 T(1)) for complete relaxation of longitudinal magnetization of DAM becomes unnecessary. A multi-echo imaging sequence is additionally incorporated to further improve the efficiency of data acquisition. Simulations demonstrate an excellent flip angle measurement accuracy for catalyzed DAM even with TR << T(1). Phantom and in vivo volunteer studies are presented to demonstrate the catalyzation effect upon B(1)(+) mapping and the application of 3D catalyzed DAM for rapid and accurate large volume RF field mapping.

| S-EPMC2896243 | biostudies-other

3D confocal laser-scanning microscopy for large-area imaging of the corneal subbasal nerve plexus.

Project description:The capability of corneal confocal microscopy (CCM) to acquire high-resolution in vivo images of the densely innervated human cornea has gained considerable interest in using this non-invasive technique as an objective diagnostic tool for staging peripheral neuropathies. Morphological alterations of the corneal subbasal nerve plexus (SNP) assessed by CCM have been shown to correlate well with the progression of neuropathic diseases and even predict future-incident neuropathy. Since the field of view of single CCM images is insufficient for reliable characterisation of nerve morphology, several image mosaicking techniques have been developed to facilitate the assessment of the SNP in large-area visualisations. Due to the limited depth of field of confocal microscopy, these approaches are highly sensitive to small deviations of the focus plane from the SNP layer. Our contribution proposes a new automated solution, combining guided eye movements for rapid expansion of the acquired SNP area and axial focus plane oscillations to guarantee complete imaging of the SNP. We present results of a feasibility study using the proposed setup to evaluate different oscillation settings. By comparing different image selection approaches, we show that automatic tissue classification algorithms are essential to create high-quality mosaic images from the acquired 3D datasets.

| S-EPMC5945773 | biostudies-literature

Three-dimensional scanning transmission electron microscopy of biological specimens.

Project description:A three-dimensional (3D) reconstruction of the cytoskeleton and a clathrin-coated pit in mammalian cells has been achieved from a focal-series of images recorded in an aberration-corrected scanning transmission electron microscope (STEM). The specimen was a metallic replica of the biological structure comprising Pt nanoparticles 2-3 nm in diameter, with a high stability under electron beam radiation. The 3D dataset was processed by an automated deconvolution procedure. The lateral resolution was 1.1 nm, set by pixel size. Particles differing by only 10 nm in vertical position were identified as separate objects with greater than 20% dip in contrast between them. We refer to this value as the axial resolution of the deconvolution or reconstruction, the ability to recognize two objects, which were unresolved in the original dataset. The resolution of the reconstruction is comparable to that achieved by tilt-series transmission electron microscopy. However, the focal-series method does not require mechanical tilting and is therefore much faster. 3D STEM images were also recorded of the Golgi ribbon in conventional thin sections containing 3T3 cells with a comparable axial resolution in the deconvolved dataset.

| S-EPMC2917646 | biostudies-literature

Rapid, large-volume, thermally controlled 3D printing using a mobile liquid interface.

Project description:We report a stereolithographic three-dimensional printing approach for polymeric components that uses a mobile liquid interface (a fluorinated oil) to reduce the adhesive forces between the interface and the printed object, thereby allowing for a continuous and rapid print process, regardless of polymeric precursor. The bed area is not size-restricted by thermal limitations because the flowing oil enables direct cooling across the entire print area. Continuous vertical print rates exceeding 430 millimeters per hour with a volumetric throughput of 100 liters per hour have been demonstrated, and proof-of-concept structures made from hard plastics, ceramic precursors, and elastomers have been printed.

| S-EPMC6933944 | biostudies-literature

SimGBS: A Rapid Method for Simulating Large-Scale Genotyping-by-Sequencing Data

Project description:SimGBS is a versatile method of simulating Genotyping-by-Sequencing (GBS) data. It can be implemented with any genome of choice. Users can modify different parameters to customise GBS setting, such as the choice of restriction enzyme and sequencing depth. By taking the gene-drop approach, users can also specify the demographic history and define population structure (by supplying a pedigree file). Like real sequencers, SimGBS will output data into FASTQ format.

2022-07-24 | PRJEB54897 | EVA

ACT-PRESTO: Rapid and consistent tissue clearing and labeling method for 3-dimensional (3D) imaging.

Project description:Understanding the structural organization of organs and organisms at the cellular level is a fundamental challenge in biology. This task has been approached by reconstructing three-dimensional structure from images taken from serially sectioned tissues, which is not only labor-intensive and time-consuming but also error-prone. Recent advances in tissue clearing techniques allow visualization of cellular structures and neural networks inside of unsectioned whole tissues or the entire body. However, currently available protocols require long process times. Here, we present the rapid and highly reproducible ACT-PRESTO (active clarity technique-pressure related efficient and stable transfer of macromolecules into organs) method that clears tissues or the whole body within 1 day while preserving tissue architecture and protein-based signals derived from endogenous fluorescent proteins. Moreover, ACT-PRESTO is compatible with conventional immunolabeling methods and expedites antibody penetration into thick specimens by applying pressure. The speed and consistency of this method will allow high-content mapping and analysis of normal and pathological features in intact organs and bodies.

| S-EPMC4707495 | biostudies-literature

Rapid, simple and inexpensive production of custom 3D printed equipment for large-volume fluorescence microscopy.

Project description:The cost of 3D printing has reduced dramatically over the last few years and is now within reach of many scientific laboratories. This work presents an example of how 3D printing can be applied to the development of custom laboratory equipment that is specifically adapted for use with the novel brain tissue clearing technique, CLARITY. A simple, freely available online software tool was used, along with consumer-grade equipment, to produce a brain slicing chamber and a combined antibody staining and imaging chamber. Using standard 3D printers we were able to produce research-grade parts in an iterative manner at a fraction of the cost of commercial equipment. 3D printing provides a reproducible, flexible, simple and cost-effective method for researchers to produce the equipment needed to quickly adopt new methods.

| S-EPMC4626572 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data