Browse
Submit Data
Databases
API
Help

Dataset Information

10 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Preparation of Calcined Zirconia-Carbon Composite from Metal Organic Frameworks and Its Application to Adsorption of Crystal Violet and Salicylic Acid.

ABSTRACT: Zirconia-carbon (ZC) composites were prepared via calcination of Zr-based metal organic frameworks, UiO-66 and amino-functionalized UiO-66, under N₂ atmosphere. The prepared composites were characterized using a series of instrumental analyses. The surface area of the ZC composites increased with the increase of calcination temperature, with the formation of a graphite oxide phase observed at 900 °C. The composites were used for adsorptive removal of a dye (crystal violet, CV) and a pharmaceutical and personal care product (salicylic acid, SA). The increase of the calcination temperature resulted in enhanced adsorption capability of the composites toward CV. The composite calcined at 900 °C exhibited a maximum uptake of 243 mg·g^-1, which was much greater than that by a commercial activated carbon. The composite was also effective in SA adsorption (102 mg·g^-1), and N-functionalization of the composite further enhanced its adsorption capability (109 mg·g^-1). CV adsorption was weakly influenced by solution pH, but was more dependent on the surface area and pore volume of the ZC composite. Meanwhile, SA adsorption showed strong pH dependence, which implies an active role of electrostatic interactions in the adsorption process. Base-base repulsion and hydrogen bonding are also suggested to influence the adsorption of CV and SA, especially for the N-functionalized composite.

SUBMITTER: Hasan Z

PROVIDER: S-EPMC5502925 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Adsorption of Amyloid Beta Peptide by Metal-Organic Frameworks.

Project description:Metal-organic frameworks (MOFs) are capable of adsorbing a wide range of molecules. In addition to the more commonly investigated small molecules, researchers have demonstrated that MOFs adsorb much larger molecules, such as proteins and peptides. We have investigated whether MOFs are capable of adsorbing amyloid beta peptide. Amyloid beta plays a pivotal role in the progression of Alzheimer's disease because individual copies of the peptides can aggregate, forming neurotoxic oligomers and the amyloid plaques found in brains of Alzheimer's patients. After synthesizing a number of commonly studied MOFs, their adsorption capabilities were tested. We found that the MOFs tested readily adsorbed small amounts of amyloid beta (as determined by gel electrophoresis). It was determined that in most cases, adsorption occurs rapidly, with complete adsorption within minutes of incubation. Overall adsorption capacity was found to vary between different MOFs as well. Once adsorbed, amyloid beta peptide can subsequently be eluted from some MOFs by treatment with acetonitrile/water solutions, though retention strength varied between different MOFs. In some cases, MOFs that showed complete adsorption also saw high levels of peptide elution, but others showed little to no elution of the peptide. Together these data can help us begin to understand the interactions between amyloid beta and MOFs.

| S-EPMC7774084 | biostudies-literature

Cooperative adsorption of carbon disulfide in diamine-appended metal-organic frameworks.

Project description:Over one million tons of CS2 are produced annually, and emissions of this volatile and toxic liquid, known to generate acid rain, remain poorly controlled. As such, materials capable of reversibly capturing this commodity chemical in an energy-efficient manner are of interest. Recently, we detailed diamine-appended metal-organic frameworks capable of selectively capturing CO2 through a cooperative insertion mechanism that promotes efficient adsorption-desorption cycling. We therefore sought to explore the ability of these materials to capture CS2 through a similar mechanism. Employing crystallography, spectroscopy, and gas adsorption analysis, we demonstrate that CS2 is indeed cooperatively adsorbed in N,N-dimethylethylenediamine-appended M2(dobpdc) (M?=?Mg, Mn, Zn; dobpdc4-?=?4,4'-dioxidobiphenyl-3,3'-dicarboxylate), via the formation of electrostatically paired ammonium dithiocarbamate chains. In the weakly thiophilic Mg congener, chemisorption is cleanly reversible with mild thermal input. This work demonstrates that the cooperative insertion mechanism can be generalized to other high-impact target molecules.

| S-EPMC6277438 | biostudies-literature

Preparation of Polyaniline/Emulsion Microsphere Composite for Efficient Adsorption of Organic Dyes.

Project description:Surface-functionalized polymeric microspheres have wide applications in various areas. Herein, monodisperse poly(styrene-methyl methacrylate-acrylic acid) (PSMA) microspheres were prepared via emulsion polymerization. Polyaniline (PANI) was then coated on the PSMA surface via in situ polymerization, and a three-dimensional (3D) structured reticulate PANI/PSMA composite was, thus, obtained. The adsorption performance of the composite for organic dyes under different circumstances and the adsorption mechanism were studied. The obtained PANI/PSMA composite exhibited a high adsorption rate and adsorption capacity, as well as good adsorption selectivity toward methyl orange (MO). The adsorption process followed pseudo-second-order kinetics and the Langmuir isotherm. The maximum adsorption capacity for MO was 147.93 mg/g. After five cycles of adsorption-desorption, the removal rate remained higher than 90%, which indicated that the adsorbent has great recyclability. The adsorbent materials presented herein would be highly valuable for the removal of organic dyes from wastewater.

| S-EPMC7023397 | biostudies-literature

Excavating hidden adsorption sites in metal-organic frameworks using rational defect engineering.

Project description:Metal-organic frameworks are known to contain defects within their crystalline structures. Successful engineering of these defects can lead to modifications in material properties that can potentially improve the performance of many existing frameworks. Herein, we report the high-throughput computational screening of a large experimental metal-organic framework database to identify 13 frameworks that show significantly improved methane storage capacities with linker vacancy defects. The candidates are first identified by focusing on structures with methane-inaccessible pores blocked away from the main adsorption channels. Then, organic linkers of the candidate structures are judiciously replaced with appropriate modulators to emulate the presence of linker vacancies, resulting in the integration and utilization of the previously inaccessible pores. Grand canonical Monte Carlo simulations of defective candidate frameworks show significant enhancements in methane storage capacities, highlighting that rational defect engineering can be an effective method to significantly improve the performance of the existing metal-organic frameworks.

| S-EPMC5691151 | biostudies-literature

Magnetic sustentation as an adsorption characterization technique for paramagnetic metal-organic frameworks.

Project description:Nowadays, there are many reliable characterization techniques for the study of adsorption properties in gas phase. However, the techniques available for the study of adsorption processes in solution, rely on indirect characterization techniques that measure the adsorbate concentration remaining in solution. In this work, we present a sensing method based on the magnetic properties of metal-organic frameworks (MOFs) containing paramagnetic metal centres, which stands out for the rapidity, low cost and in situ direct measurement of the incorporated adsorbate within the porous material. To illustrate this sensing technique, the adsorption in solution of four MOFs have been characterized: MIL-88A(Fe), MOF-74(Cu, Co) and ZIF-67(Co). Our simple and efficient method allows the direct determination of the adsorbed mass, as well as the measurement of adsorption isotherm curves, which we hope will greatly advance the study of adsorption processes in solution, since this method is independent of the chemical nature of the adsorbate that often makes its quantification difficult.

| S-EPMC9814357 | biostudies-literature

Cationic nickel metal-organic frameworks for adsorption of negatively charged dye molecules.

Project description:Industrial dye effluents with low biodegradability are highly toxic and carcinogenic on both human and aquatic lives, thus they are detrimental to the biodiversity of environment. Herein, this data set presents the potential of cationic Nickel based MOFs in the adsorption of charged and neutral dye molecules. Data set include a concise description of experimental conditions for the synthesis of imidazolium ligands, 1,3-bis(4-carboxyphenyl)imidazolium chloride (H2L+Cl-) and 1,3-bis(3,5-dicarboxyphenyl)imidazolium chloride (H4L+Cl-), and MOFs. The data show that the two Nickel MOFs, 1 and 2, synthesized from imidazolium ligands are cationic frameworks. The adsorption and analysis data show that the cationic MOFs exhibit efficient adsorptive removal capacity for positively charged dyes, adsorbing up to 81.08% and 98.65% of Methyl orange and Congo red, respectively.

| S-EPMC5998174 | biostudies-other

Polyethyleneimine-Modified UiO-66-NH<sub>2</sub>(Zr) Metal-Organic Frameworks: Preparation and Enhanced CO<sub>2</sub> Selective Adsorption.

Project description:UiO-66-NH2, a zirconium-based functional metal-organic framework (MOF), was postsynthetically modified via Schiff base reaction between aldehyde groups in glutaraldehyde and amino groups in UiO-66-NH2 and CO2-preabsorbed polyethyleneimine (PEI). The resulting PEI-modified MOFs, abbreviated as PEIC@UiO, were characterized with 1H NMR, Fourier transform infrared, powder X-ray diffraction, Brunauer-Emmett-Teller, scanning electron microscopy, and thermogravimetric analysis and evaluated as CO2 adsorbents. In comparison with pristine UiO-66-NH2, the PEIC@UiO adsorbents have reduced specific surface area (7-150 m2/g) but maintained the same crystal structure. Particularly, the PEIC96@UiO adsorbent exhibited significantly improved CO2/N2 adsorption selectivity (48 vs 25) and higher CO2 adsorption capacity (3.2 vs 2.7 mmol/g). The adsorbent also displayed moderate desorption energy (68 kJ/mol CO2), superior moisture endurance, and recyclability, which are very desirable for practical applications.

| S-EPMC6648867 | biostudies-literature

Modeling adsorption properties of structurally deformed metal-organic frameworks using structure-property map.

Project description:Structural deformation and collapse in metal-organic frameworks (MOFs) can lead to loss of long-range order, making it a challenge to model these amorphous materials using conventional computational methods. In this work, we show that a structure-property map consisting of simulated data for crystalline MOFs can be used to indirectly obtain adsorption properties of structurally deformed MOFs. The structure-property map (with dimensions such as Henry coefficient, heat of adsorption, and pore volume) was constructed using a large data set of over 12000 crystalline MOFs from molecular simulations. By mapping the experimental data points of deformed SNU-200, MOF-5, and Ni-MOF-74 onto this structure-property map, we show that the experimentally deformed MOFs share similar adsorption properties with their nearest neighbor crystalline structures. Once the nearest neighbor crystalline MOFs for a deformed MOF are selected from a structure-property map at a specific condition, then the adsorption properties of these MOFs can be successfully transformed onto the degraded MOFs, leading to a new way to obtain properties of materials whose structural information is lost.

| S-EPMC5544324 | biostudies-literature

Characterization of Adsorption Enthalpy of Novel Water-Stable Zeolites and Metal-Organic Frameworks.

Project description:Water adsorption is becoming increasingly important for many applications including thermal energy storage, desalination, and water harvesting. To develop such applications, it is essential to understand both adsorbent-adsorbate and adsorbate-adsorbate interactions, and also the energy required for adsorption/desorption processes of porous material-adsorbate systems, such as zeolites and metal-organic frameworks (MOFs). In this study, we present a technique to characterize the enthalpy of adsorption/desorption of zeolites and MOF-801 with water as an adsorbate by conducting desorption experiments with conventional differential scanning calorimetry (DSC) and thermogravimetric analyzer (TGA). With this method, the enthalpies of adsorption of previously uncharacterized adsorbents were estimated as a function of both uptake and temperature. Our characterizations indicate that the adsorption enthalpies of type I zeolites can increase to greater than twice the latent heat whereas adsorption enthalpies of MOF-801 are nearly constant for a wide range of vapor uptakes.

| S-EPMC4726357 | biostudies-literature

Use of the PIXEL method to investigate gas adsorption in metal-organic frameworks.

Project description:PIXEL has been used to perform calculations of adsorbate-adsorbent interaction energies between a range of metal-organic frameworks (MOFs) and simple guest molecules. Interactions have been calculated for adsorption between MOF-5 and Ar, H2, and N2; Zn2(BDC)2(TED) (BDC = 1,4-benzenedicarboxylic acid, TED = triethylenediamine) and H2; and HKUST-1 and CO2. The locations of the adsorption sites and the calculated energies, which show differences in the Coulombic or dispersion characteristic of the interaction, compare favourably to experimental data and literature energy values calculated using density functional theory.

| S-EPMC5361143 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data