Dataset Information

Arbitrary waveform modulated pulse EPR at 200GHz.

ABSTRACT: We report here on the implementation of arbitrary waveform generation (AWG) capabilities at ?200GHz into an Electron Paramagnetic Resonance (EPR) and Dynamic Nuclear Polarization (DNP) instrument platform operating at 7T. This is achieved with the integration of a 1GHz, 2 channel, digital to analog converter (DAC) board that enables the generation of coherent arbitrary waveforms at Ku-band frequencies with 1ns resolution into an existing architecture of a solid state amplifier multiplier chain (AMC). This allows for the generation of arbitrary phase- and amplitude-modulated waveforms at 200GHz with >150mW power. We find that the non-linearity of the AMC poses significant difficulties in generating amplitude-modulated pulses at 200GHz. We demonstrate that in the power-limited regime of ?1<1MHz phase-modulated pulses were sufficient to achieve significant improvements in broadband (>10MHz) spin manipulation in incoherent (inversion), as well as coherent (echo formation) experiments. Highlights include the improvement by one order of magnitude in inversion bandwidth compared to that of conventional rectangular pulses, as well as a factor of two in improvement in the refocused echo intensity at 200GHz.

SUBMITTER: Kaminker I

PROVIDER: S-EPMC5519772 | biostudies-literature | 2017 Jun

REPOSITORIES: biostudies-literature

ACCESS DATA

Publications

Arbitrary waveform modulated pulse EPR at 200GHz.

Kaminker Ilia I Barnes Ryan R Han Songi S

Journal of magnetic resonance (San Diego, Calif. : 1997) 20170427

We report here on the implementation of arbitrary waveform generation (AWG) capabilities at ∼200GHz into an Electron Paramagnetic Resonance (EPR) and Dynamic Nuclear Polarization (DNP) instrument platform operating at 7T. This is achieved with the integration of a 1GHz, 2 channel, digital to analog converter (DAC) board that enables the generation of coherent arbitrary waveforms at K<sub>u</sub>-band frequencies with 1ns resolution into an existing architecture of a solid state amplifier multipl ...[more]

PMID: 28482216

Similar Datasets

Project description:Objective.Researchers are developing biomedical devices with embedded closed-loop algorithms for providing advanced adaptive therapies. As these devices become more capable and algorithms become more complex, tasked with integrating and interpreting multi-channel, multi-modal electrophysiological signals, there is a need for flexible bench-top testing and prototyping. We present a methodology for leveraging off-the-shelf audio equipment to construct a biosignal waveform generator capable of streaming pre-recorded biosignals from a host computer. By re-playing known, well-characterized, but physiologically relevant real-world biosignals into a device under test, researchers can evaluate their systems without the need for expensivein vivoexperiments.Approach.An open-source design based on the proposed methodology is described and validated, the NeuroDAC. NeuroDAC allows for 8 independent channels of biosignal playback using a simple, custom designed attenuation and buffering circuit. Applications can communicate with the device over a USB interface using standard audio drivers. On-board analog amplitude adjustment is used to maximize the dynamic range for a given signal and can be independently tuned for each channel.Main results.Low noise component selection yields a no-signal noise floor of just 5.35 ± 0.063. NeuroDAC's frequency response is characterized with a high pass -3 dB rolloff at 0.57 Hz, and is capable of accurately reproducing a wide assortment of biosignals ranging from EMG, EEG, and ECG to extracellularly recorded neural activity. We also present an application example using the device to test embedded algorithms on a closed-loop neural modulation device, the Medtronic RC+S.Significance.By making the design of NeuroDAC open-source we aim to present an accessible tool for rapidly prototyping new biomedical devices and algorithms than can be easily modified based on individual testing needs.ClinicalTrials.gov Identifiers: NCT04281134, NCT03437928, NCT03582891.

Project description:Morphological alterations in intracranial pressure (ICP) pulse waveform (ICPW) secondary to intracranial hypertension (ICP >20 mmHg) and a reduction in intracranial compliance (ICC) are well known indicators of neurological severity. The exclusive exploration of modifications in ICPW after either the loss of skull integrity or surgical procedures for intracranial hypertension resolution is not a common approach studied. The present study aimed to assess the morphological alterations in ICPW among neurocritical care patients with skull defects and decompressive craniectomy (DC) by comparing the variations in ICPW features according to elevations in mean ICP values. Patients requiring ICP monitoring because of acute brain injury were included. A continuous record of 10 min-length for the beat-by-beat analysis of ICPW was performed, with ICP elevation produced by means of ultrasound-guided manual internal jugular vein compression at the end of the record. ICPW features (peak amplitude ratio (P2/P1), time interval to pulse peak (TTP) and pulse amplitude) were counterweighed between baseline and compression periods. Results were distributed for three groups: intact skull (exclusive burr hole for ICP monitoring), craniotomy/large fractures (group 2) or DC (group 3). 57 patients were analyzed. A total of 21 (36%) presented no skull defects, 21 (36%) belonged to group 2, whereas 15 (26%) had DC. ICP was not significantly different between groups: ±15.11 for intact, 15.33 for group 2 and ±20.81 mmHg for group 3, with ICP-induced elevation also similar between groups (p = 0.56). Significant elevation was observed for the P2/P1 ratio for groups 1 and 2, whereas a reduction was observed in group 3 (elevation of ±0.09 for groups 1 and 2, but a reduction of 0.03 for group 3, p = 0.01), and no significant results were obtained for TTP and pulse amplitudes. In the present study, intracranial pressure pulse waveform analysis indicated that intracranial compliance was significantly more impaired among decompressive craniectomy patients, although ICPW indicated DC to be protective for further influences of ICP elevations over the brain. The analysis of ICPW seems to be an alternative to real-time ICC assessment.

Project description:ObjectivesCapillary refill time is a noninvasive method to assess tissue perfusion to determine shock status. Capillary refill time is defined as the time required to regain skin color after blanching pressure is applied. Although common methods to measure capillary refill time depend on clinicians' visual assessment, a new approach using a pulse oximeter waveform analysis exists, referred to as full finger reperfusion time. We aim to evaluate reproducibility and validity of the novel full finger reperfusion time measurement using clinicians' visual capillary refill time assessment as a reference standard.DesignProspective observational study.SettingPICUs and operating suites at a large academic children's hospital.PatientsNinety-nine children 1-12 years old with various skin color tones.InterventionsEach child had 10 measurements, including five full finger reperfusion time and five clinician capillary refill time, alternating second and third digits.Measurements and main resultsEighteen children had prolonged capillary refill time (> 2 s) and four children with capillary refill time greater than 3 seconds. Four-hundred eighty-five data pairs were analyzed. Intraclass correlation coefficient of full finger reperfusion time within each patient was 0.76 (95% CI, 0.68-0.83), demonstrating good reproducibility. Correlation coefficient between full finger reperfusion time and clinician capillary refill time was moderate: r = 0.37 (p < 0.0001; 95% CI, 0.29-0.44) for the pairs and r = 0.52 (p < 0.0001; 95% CI, 0.36-0.65) for patient average. Bland-Altman plot showed a consistent difference between full finger reperfusion time and clinician capillary refill time (full finger reperfusion time 1.14 s longer). Weak association was found between force and full finger reperfusion time (β = -0.033 ± 0.016; 95% CI, -0.065 to -0.0016; p = 0.04), finger thickness (β = -0.20 ± 0.089; 95% CI, -0.37 to -0.19; p = 0.03), except for color tone (p = 0.31). Finger temperature was associated with full finger reperfusion time (β = -0.18 ± 0.041; 95% CI, -0.26 to -0.0999; p < 0.0001).ConclusionsFull finger reperfusion time demonstrated good reproducibility. Full finger reperfusion time showed moderate correlation with clinician capillary refill time. Full finger reperfusion time was 1.14 seconds longer than capillary refill time. Future studies should focus on the clinical value of full finger reperfusion time as a monitoring device for hemodynamics in critically ill children.

Dataset Information

Arbitrary waveform modulated pulse EPR at 200GHz.

Publications

Arbitrary waveform modulated pulse EPR at 200GHz.

Similar Datasets

OmicsDI is part of the ELIXIR infrastructure

Tweets