Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Gyro-elastic beams for the vibration reduction of long flexural systems.

ABSTRACT: The paper presents a model of a chiral multi-structure incorporating gyro-elastic beams. Floquet-Bloch waves in periodic chiral systems are investigated in detail, with the emphasis on localization and the formation of standing waves. It is found that gyricity leads to low-frequency standing modes and generation of stop-bands. A design of an earthquake protection system is offered here, as an interesting application of vibration isolation. Theoretical results are accompanied by numerical simulations in the time-harmonic regime.

SUBMITTER: Carta G

PROVIDER: S-EPMC5549565 | biostudies-literature | 2017 Jul

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Gyro-elastic beams for the vibration reduction of long flexural systems.

Carta G G Jones I S IS Movchan N V NV Movchan A B AB Nieves M J MJ

Proceedings. Mathematical, physical, and engineering sciences 20170719 2203

The paper presents a model of a chiral multi-structure incorporating gyro-elastic beams. Floquet-Bloch waves in periodic chiral systems are investigated in detail, with the emphasis on localization and the formation of standing waves. It is found that gyricity leads to low-frequency standing modes and generation of stop-bands. A design of an earthquake protection system is offered here, as an interesting application of vibration isolation. Theoretical results are accompanied by numerical simulat ...[more]

PMID: 28804257

Similar Datasets

Flexural vibration systems with gyroscopic spinners.

Project description:In this paper, we study the spectral properties of a finite system of flexural elements connected by gyroscopic spinners. We determine how the eigenfrequencies and eigenmodes of the system depend on the gyricity of the spinners. In addition, we present a transient numerical simulation that shows how a gyroscopic spinner attached to the end of a hinged beam can be used as a 'stabilizer', reducing the displacements of the beam. We also discuss the dispersive properties of an infinite periodic system of beams with gyroscopic spinners at the junctions. In particular, we investigate how the band-gaps of the structure can be tuned by varying the gyricity of the spinners. This article is part of the theme issue 'Modelling of dynamic phenomena and localization in structured media (part 1)'.

| S-EPMC6732376 | biostudies-literature

Omnidirectional flexural invisibility of multiple interacting voids in vibrating elastic plates.

Project description:In elasticity, the design of a cloaking for an inclusion or a void to leave a vibrational field unperturbed by its presence, so to achieve its invisibility, is a thoroughly analysed, but still unchallenged, mechanical problem. The 'cloaking transformation' concept, originally developed in electromagnetism and optics, is not directly applicable to elastic waves, displaying a complex vectorial nature. Consequently, all examples of elastic cloaking presented so far involve complex design and thick coating skins. These cloakings often work only for problems of unidirectional propagation, within narrow ranges of frequency, and considering only one cloaked object. Here, a new method based on the concept of reinforcement, achieved via elastic stiffening and mass redistribution, is introduced to cloak multiple voids in an elastic plate. This simple technique produces invisibility of the voids to flexural waves within an extremely broad range of frequencies and thus surpassing in many aspects all existing cloaking techniques. The proposed design principle is applicable in mechanical problems ranging from the micro-scale to the scale of civil engineering. For instance, our results show how to design a perforated load-bearing building wall, vibrating during an earthquake exactly as the same wall, but unperforated, a new finding for seismic protection.

| S-EPMC6784387 | biostudies-literature

Branched flows of flexural elastic waves in non-uniform cylindrical shells.

Project description:Propagation of elastic waves along the axis of cylindrical shells is of great current interest due to their ubiquitous presence and technological importance. Geometric imperfections and spatial variations of properties are inevitable in such structures. Here we report the existence of branched flows of flexural waves in such waveguides. The location of high amplitude motion, away from the launch location, scales as a power law with respect to the variance, and linearly with respect to the correlation length of the spatial variation in the bending stiffness. These scaling laws are then theoretically derived from the ray equations. Numerical integration of the ray equations also exhibit this behaviour-consistent with finite element numerical simulations as well as the theoretically derived scaling. There appears to be a universality for the exponents in the scaling with respect to similar observations in the past for waves in other physical contexts, as well as dispersive flexural waves in elastic plates.

| S-EPMC10218726 | biostudies-literature

Flexural strengthening of beams using post-tensioned metal straps fully wrapped around steel channels anchored to normal steel reinforced concrete beams.

Project description:The efficacy of post-tensioned metal straps PTMS, wrapped around steel channels anchored to normal reinforced concrete (R.C) beams is tested in increasing the flexural capacity of the beams. For this purpose, nine normal R.C beams with dimensions of 160 mm x 240 mm x 2100 mm are constructed to fail in bending. The location and the number of the straps are considered as the main variable. It is found that using PTMS can enhance the load-carrying capacity of the beam by 29% to 63%. The decisive factors affecting the increase are the location of the straps (at the bottom or sides), shape of the flange and web edges (squared or rounded) and alignment of the flanges (vertical or inclined). A complete guide can be found in the paper as it is a novel method of strengthening beams which can be applied to the beams cast in place with integral slabs.

| S-EPMC8244913 | biostudies-literature

Designing 3D Digital Metamaterial for Elastic Waves: From Elastic Wave Polarizer to Vibration Control.

Project description:Elastic wave polarizers, which can filter out linearly polarized elastic waves from hybrid elastic waves, remain a challenge since elastic waves contain both transverse and longitudinal natures. Here, a tunable, digital, locally resonant metamaterial inspired by abacus is proposed, which consists of 3D-printed octahedral frames and built-in electromagnets. By controlling current in the electromagnets, each unit cell exhibits three digital modes, where the elastic waves have different characteristics of propagation under each mode. A variety of waveguides can be formed by a combination of the three modes and desired polarization can be further filtered out from hybrid elastic waves in a tunable manner. The underlying mechanism of these polarizer-like characteristics is investigated through a combination of theoretical analysis, numerical simulation, and experimental testing. This study provides a means of filtering out the desired wave from hybrid elastic waves, and offers promise for vibration control of particle distribution and flexible structure.

| S-EPMC6702649 | biostudies-literature

Flexural behaviour and evaluation of ultra-high-performance fibre reinforced concrete beams cured at room temperature.

Project description:Heat treatment is often required for ultra-high-performance concrete (UHPC) to achieve high strength. To broad its use in construction, the effect of different curing conditions on the properties of UHPC has been developed for many years. The experimental investigation of large scale ultra-high-performance fibre reinforced concrete (UHPFRC) beams is limited. In the present study, UHPFRC specimens and concrete cured at 20 °C were prepared to investigate the properties and flexural behaviour. The standard cubic compressive strength of UHPFRC specimens cannot be achieved at curing temperature of 20 °C. The bearing capacity under flexure was enhanced with the increase of reinforcement ratio. The failure modes of beams changed from ductile to brittle as the reinforcement ratio increased from 1.26 to 9.50%. The flexural behaviour of UHPFRC beams cured at room temperature was in accordance with the UHPFRC beams cured at high temperature in previous studies. In addition, the calculation model of CECS38-2004 underestimated the bending moment capacity of the under-reinforced UHPFRC beams (with reinforcement ratio from 0 to 7.85%) and overestimated the bending moment capacity of the UHPFRC beams with high reinforcement ration of 9.50%.

| S-EPMC8463697 | biostudies-literature

Estimating the flexural rigidity of Arabidopsis inflorescence stems: Free-vibration test vs. three-point bending test.

Project description:The mechanical strength of a plant stem (a load-bearing organ) helps the plant resist drooping, buckling and fracturing. We previously proposed a method for quickly evaluating the stiffness of an inflorescence stem in the model plant Arabidopsis thaliana based on measuring its natural frequency in a free-vibration test. However, the relationship between the stiffness and flexural rigidity of inflorescence stems was unclear. Here, we compared our previously described free-vibration test with the three-point bending test, the most popular method for calculating the flexural rigidity of A. thaliana stems, and examined the extent to which the results were correlated. Finally, to expand the application range, we present an example of a modified free-vibration test. Our results provide a reference for improving estimates of the flexural rigidity of A. thaliana inflorescence stems.

| S-EPMC8034677 | biostudies-literature

Soft and disordered hyperuniform elastic metamaterials for highly efficient vibration concentration.

Project description:Vibrations, which widely exist throughout the world, could be a nearly endless and locally obtained green energy source. It has been a long-standing challenge to efficiently utilize dispersed vibration energy, especially within the high-frequency range, since the amplitudes of high-frequency vibrations in local parts of objects are relatively weak. Here, for the first time, we propose a soft and disordered hyperuniform elastic metamaterial (DHEM), achieving a remarkable concentration of vibrations in broad frequency bands by a maximum enhancement factor of ∼4000 at 1930 Hz. The DHEM, with rational sizes from ∼1 cm to ∼1000 cm, covers a broad range of frequencies from ∼10 Hz to ∼10 kHz, which are emitted by many vibration sources including domestic appliances, factories and transportation systems, for example. Moreover, the performance of the soft DHEM under deformation is validated, enabling conformal attachments on uneven objects. Our findings lay the groundwork for reducing traditional energy consumption by recovering some of the energy dissipated by devices in the working world.

| S-EPMC8783669 | biostudies-literature

Application of Rotation Rate Sensors in Modal and Vibration Analyses of Reinforced Concrete Beams.

Project description:The recent rapid development of rotation rate sensor technology opens new opportunities for their application in more and more fields. In this paper, the potential of rotational sensors for the modal analysis of full-scale civil engineering structural elements is experimentally examined. For this purpose, vibrations of two 6-m long beams made of ultra-high performance concrete (UHPC) were measured using microelectromechanical system (MEMS) rotation rate sensors. The beams were excited to vibrations using an impact hammer and a dynamic vibration exciter. The results of the experiment show that by using rotation rate sensors, one can directly obtain derivatives of mode shapes and deflection shapes. These derivatives of mode shapes, often called "rotational modes", bring more information regarding possible local stiffness variations than the traditional transversal and deflection mode shapes, so their extraction during structural health monitoring is particularly useful. Previously, the rotational modes could only be obtained indirectly (e.g., by central difference approximation). Here, with the application of rotation rate sensors, one can obtain rotational modes and deflection shapes with a higher precision. Furthermore, the average strain rate and dynamic strain were acquired using the rotation rate sensors. The laboratory experiments demonstrated that rotation rate sensors were matured enough to be used in the monitoring and modal analyses of full-scale civil engineering elements (e.g., reinforced concrete beams).

| S-EPMC7506681 | biostudies-literature

High-Performance Piezoelectric-Type MEMS Vibration Sensor Based on LiNbO3 Single-Crystal Cantilever Beams.

Project description:It is a great challenge to detect in-situ high-frequency vibration signals for extreme environment applications. A highly sensitive and robust vibration sensor is desired. Among the many piezoelectric materials, single-crystal lithium niobate (LiNbO3) could be a good candidate to meet the demand. In this work, a novel type of micro-electro-mechanical system (MEMS) vibration sensor based on a single crystalline LiNbO3 thin film is demonstrated. Firstly, the four-cantilever-beam MEMS vibration sensor was designed and optimized with the parametric method. The structural dependence on the intrinsic frequency and maximum stress was obtained. Then, the vibration sensor was fabricated using standard MEMS processes. The practical intrinsic frequency of the as-presented vibration sensor was 5.175 kHz, which was close to the calculated and simulated frequency. The dynamic performance of the vibration sensor was tested on a vibration platform after the packaging of the printed circuit board. The effect of acceleration was investigated, and it was observed that the output charge was proportional to the amplitude of the acceleration. As the loading acceleration amplitude is 10 g and the frequency is in the range of 20 to 2400 Hz, the output charge amplitude basically remains stable for the frequency range from 100 Hz to 1400 Hz, but there is a dramatic decrease around 1400 to 2200 Hz, and then it increases significantly. This should be attributed to the significant variation of the damping coefficient near 1800 Hz. Meanwhile, the effect of the temperature on the output was studied. The results show the nearly linear dependence of the output charge on the temperature. The presented MEMS vibration sensors were endowed with a high output performance, linear dependence and stable sensitivity, and could find potential applications for the detection of wide-band high-frequency vibration.

| S-EPMC8879162 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data