Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Structure and Flexural Properties of Typha Leaves.

ABSTRACT: The Typha leaf has a structure of lightweight cantilever beam, exhibiting excellent mechanical properties with low density. Especially, the leaf blade evolved high strength and low density with high porosity. In this paper, the structure of Typha leaf was characterized by microcomputed tomography (Micro-CT) and scanning electron microscopy (SEM), and the relationship with flexural properties was analyzed. The three-point bending test was performed on leaves to examine flexural properties, which indicated that the flexural properties vary from the base to the apex in gradient. The cross-sectional geometry shape of the leaf blade presented a strong influence on the optimized flexural stiffness. The load carrying capacity of the leaf depended on the development level of the epidermal tissue, the vascular bundle, the mechanical tissue, and the geometric properties. The investigation can be the basis for lightweight structure design and the application in the bionic engineering field.

SUBMITTER: Liu J

PROVIDER: S-EPMC5662842 | biostudies-literature | 2017

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

The Structure and Flexural Properties of Typha Leaves.

Liu Jingjing J Zhang Zhihui Z Yu Zhenglei Z Liang Yunhong Y Li Xiujuan X Ren Luquan L

Applied bionics and biomechanics 20171015

The Typha leaf has a structure of lightweight cantilever beam, exhibiting excellent mechanical properties with low density. Especially, the leaf blade evolved high strength and low density with high porosity. In this paper, the structure of Typha leaf was characterized by microcomputed tomography (Micro-CT) and scanning electron microscopy (SEM), and the relationship with flexural properties was analyzed. The three-point bending test was performed on leaves to examine flexural prop ...[more]

PMID: 29123373

Similar Datasets

Epifluorescent and histochemical aspects of shoot anatomy of Typha latifolia L., Typha angustifolia L. and Typha glauca Godr.

Project description:Using epifluorescent and histochemical techniques, we examined anatomical differences in the shoot organs of Typha latifolia, T. angustifolia and T. glauca. The leaf lamina of T. latifolia and T. glauca had enlarged epidermal cells and a thickened cuticle above the subepidermal vascular bundles; that of T. angustifolia lacked these characteristics. Leaf sheaths were similar among the species and all lacked the epidermal thickenings found in the lamina. The fertile stems had typical scattered vascular bundles with a band of fibres that was most prominent in T. glauca. The sterile stems were only 1 cm in length and contained a multiseriate hypodermis and a uniseriate endodermis over part of their length. The rhizomes were similar except for a pronounced band of fibres surrounding the central core in T. angustifolia. The rhizome was also characterized by an outer cortical region with a large multiseriate hypodermis/exodermis and a uniseriate endodermis with Casparian bands, suberin lamellae and secondarily thickened walls.

| S-EPMC4240377 | biostudies-literature

Tensile and Flexural Properties of Cement Composites Reinforced with Flax Nonwoven Fabrics.

Project description:The aim of this study is to develop a process to produce high-performance cement-based composites reinforced with flax nonwoven fabrics, analyzing the influence of the fabric structure-thickness and entanglement-on mechanical behavior under flexural and tensile loadings. For this purpose, composite with flax nonwoven fabrics with different thicknesses were first prepared and their cement infiltration was evaluated with backscattered electron (BSE) images. The nonwoven fabrics with the optimized thickness were then subjected to a water treatment to improve their stability to humid environments and the fiber-matrix adhesion. For a fixed thickness, the effect of the nonwoven entanglement on the mechanical behavior was evaluated under flexural and direct tension tests. The obtained results indicate that the flax nonwoven fabric reinforcement leads to cement composites with substantial enhancement of ductility.

| S-EPMC5459217 | biostudies-literature

Data characterizing flexural properties of Al/Al2O3 syntactic foam core metal matrix sandwich.

Project description:Microstructural observations and flexural property datasets are provided for aluminum alloy matrix syntactic foam core sandwich composites. The tests are conducted in three-point bending configuration. The data supplied includes methods used for conducting microscopy and mechanical testing. Raw load-displacement data, which is used to plot stress-strain graphs, obtained during the flexural test is also included. Images from a DSLR camera are stitched together to form a detailed failure sequencing video. Failure of specimens is captured in sequential images using a digital camera. These images are stitched together to develop a video for visualization of failure mechanisms. Calculations are also included for a theoretical model that is used to estimate the flexural properties of the syntactic foam core sandwich.

| S-EPMC4773369 | biostudies-literature

Typha

Project description:Typha Genome sequencing and assembly

| PRJNA751759 | ENA

Typha

Project description:Typha Genome sequencing and assembly

| PRJNA742003 | ENA

Flexural Behavior of HPFRCC Members with Inhomogeneous Material Properties.

Project description:In this paper, the flexural behavior of High-performance Fiber-Reinforced Cementitious Composite (HPFRCC) has been investigated, especially focusing on the localization of cracks, which significantly governs the flexural behavior of HPFRCC members. From four points bending tests with HPFRCC members, it was observed that almost evenly distributed cracks formed gradually, followed by a localized crack that determined the failure of the members. In order to investigate the effect of a localized crack on the flexural behavior of HPFRCC members, an analytical procedure has been developed with the consideration of intrinsic inhomogeneous material properties of HPFRCC such as cracking and ultimate tensile strengths. From the comparison, while the predictions with homogeneous material properties overestimated flexural strength and ductility of HPFRCC members, it was found that the analysis results considering localization effect with inhomogeneous material properties showed good agreement with the test results, not only the flexural strength and ductility but also the crack widths. The test results and the developed analysis procedure presented in this paper can be usefully applied for the prediction of flexural behaviors of HPFRCC members by considering the effect of localized cracking behavior.

| S-EPMC5507054 | biostudies-other

Effects of Traffic Vibrations on the Flexural Properties of Newly Placed PVA-ECC Bridge Repairs.

Project description:Polyvinyl alcohol fiber reinforced engineering cementitious composites (PVA-ECCs) exhibit excellent tight-cracking and super-high toughness behaviors and have been widely used in bridge repair projects. In reality, the conventional method in bridge repair is that a portion of the bridge is closed and repaired while the other portion is left open to traffic. Consequently, newly placed PVA-ECC bridge repairs (NP-ECC-BRs) are exposed to continuous traffic vibrations (TRVs), even during the setting periods. However, whether or not TRVs affect the expected flexural properties of NP-ECC-BRs remains unknown. The purpose of this investigation was to determine the effects of TRVs on the attainable flexural properties of NP-ECC-BRs. For this purpose, a total of 324 newly fabricated thin-plate specimens were exposed to different vibration variables using self-designed vibration equipment. After vibration, a four-point flexural test was conducted to determine the flexural properties of the specimens. The results indicate that the effects of TRVs on the strengths of NP-ECC-BRs was significantly negative, but insignificantly positive for flexural deformation. We concluded that in the design of PVA-ECC bridge repairs, effects of TRVs on the flexural deformation capacity of NP-ECC-BRs are not a cause for concern, but serious consideration should be given to the associated reduction of flexural load-bearing capacity.

| S-EPMC6829306 | biostudies-literature

Deep Sequencing of Typha angustifolia Small RNAs

Project description:We used high-throughput sequencing to identify conserved and nonconserved miRNAs and other short RNAs in Typha angustifolia under control and cadmium stressed condition. A total of 114 conserved miRNAs and 41 novel candidate miRNAs encoded by 66 hairpin precursors were identified in both small RNA libraries. 4 conserved and 6 novel miRNAs showed specific expression, which, combined with function of target genes, suggests that miRNAs may play a role in plant Cd stress response.These results provide a framework for further analysis of miRNAs and their role in regulating Typha angustifolia response to cadmium stress.

2016-04-23 | GSE65091 | GEO

Low-Velocity Impact and Post-Impact Residual Flexural Properties of Kevlar/EP Three-Dimensional Angle-Interlock Composites

Project description: Not available

| S-EPMC10856067 | biostudies-literature

Genetic structure in hybrids and progenitors provides insight into processes underlying an invasive cattail (Typha × glauca) hybrid zone.

Project description:Traditional models of hybrid zones have assumed relatively low hybrid fitness, and thus focussed more on interspecific gene flow than on hybrid dispersal. Therefore, when hybrids have high fitness and the potential for autonomous dispersal, we have limited understanding of whether hybrid dispersal or repeated local hybrid formation is more important for maintaining hybrid zones. The invasive hybrid cattail Typha × glauca occupies an extensive hybrid zone in northeastern North America where it is sympatric with its progenitors T. latifolia and T. angustifolia. We characterized genetic diversity and genetic structure of the three taxa across a broad spatial scale where the maternal parent is relatively rare, and tested the hypothesis that the hybrid shows stronger evidence of gene flow than its progenitor species, particularly among disturbed sites (ditches) compared with established wetlands. Support for this hypothesis would suggest that dispersal, rather than repeated local formation, is more important for maintaining hybrid zones. Within each taxon, genetic differentiation among ditches was comparable to that among wetlands, although clonal richness was consistently greater in ditches, suggesting more frequent seed establishment. Genetic structure across sites was more pronounced in the hybrid compared with either progenitor species. Overall, our data reflect relatively low gene flow in hybrids, and suggest that hybrids are more likely to be created in situ than to be introduced from other sites. Despite the high fitness of invasive T. × glauca and its potential for autonomy, local processes appear more important than dispersal in maintaining this hybrid zone.

| S-EPMC7239851 | biostudies-literature