Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

TiO? Nanowire Networks Prepared by Titanium Corrosion and Their Application to Bendable Dye-Sensitized Solar Cells.

ABSTRACT: TiO? nanowire networks were prepared, using the corrosion of Ti foils in alkaline (potassium hydroxide, KOH) solution at different temperatures, and then a further ion-exchange process. The prepared nanostructures were characterized by field emission scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The wet corroded foils were utilized as the photoanodes of bendable dye-sensitized solar cells (DSSCs), which exhibited a power conversion efficiency of 1.11% under back illumination.

SUBMITTER: Jin S

PROVIDER: S-EPMC5666480 | biostudies-literature | 2017 Oct

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

TiO₂ Nanowire Networks Prepared by Titanium Corrosion and Their Application to Bendable Dye-Sensitized Solar Cells.

Jin Saera S Shin Eunhye E Hong Jongin J

Nanomaterials (Basel, Switzerland) 20171012 10

TiO₂ nanowire networks were prepared, using the corrosion of Ti foils in alkaline (potassium hydroxide, KOH) solution at different temperatures, and then a further ion-exchange process. The prepared nanostructures were characterized by field emission scanning electron microscopy, Raman spectroscopy, and X-ray photoelectron spectroscopy. The wet corroded foils were utilized as the photoanodes of bendable dye-sensitized solar cells (DSSCs), which exhibited a power conversion efficiency of 1.11% un ...[more]

PMID: 29023369

Similar Datasets

Mesoporous TiO? Bragg stack templated by graft copolymer for dye-sensitized solar cells.

Project description:Organized mesoporous TiO? Bragg stacks (om-TiO? BS) consisting of alternating high and low refractive index organized mesoporous TiO? (om-TiO?) films were prepared to enhance dye loading, light harvesting, electron transport, and electrolyte pore-infiltration in dye-sensitized solar cells (DSSCs). The om-TiO? films were synthesized via a sol-gel reaction using amphiphilic graft copolymers consisting of poly(vinyl chloride) backbones and poly(oxyethylene methacrylate) side chains, i.e., PVC-g-POEM as templates. To generate high and low index films, the refractive index of om-TiO? film was tuned by controlling the grafting ratio of PVC-g-POEM via atomic transfer radical polymerization (ATRP). A polymerized ionic liquid (PIL)-based DSSC fabricated with a 1.2-?m-thick om-TiO? BS-based photoanode exhibited an efficiency of 4.3%, which is much higher than that of conventional DSSCs with a nanocrystalline TiO? layer (nc-TiO? layer) (1.7%). A PIL-based DSSC with a heterostructured photoanode consisting of 400-nm-thick organized mesoporous TiO? interfacial (om-TiO? IF) layer, 7-?m-thick nc-TiO?, and 1.2-?m-thick om-TiO? BS as the bottom, middle and top layers, respectively, exhibited an excellent efficiency of 7.5%, which is much higher than that of nanocrystaline TiO? photoanode (3.5%).

| S-EPMC4076678 | biostudies-literature

Characteristics of the Dye-Sensitized Solar Cells Using TiO₂ Nanotubes Treated with TiCl₄.

Project description:The replacement of oxide semiconducting TiO₂ nano particles with one dimensional TiO₂ nanotubes (TNTs) has been used for improving the electron transport in the dye-sensitized solar cells (DSSCs). Although use of one dimensional structure provides the enhanced photoelectrical performance, it tends to reduce the adsorption of dye on the TiO₂ surface due to decrease of surface area. To overcome this problem, we investigate the effects of TiCl₄ treatment on DSSCs which were constructed with composite films made of TiO₂ nanoparticles and TNTs. To find optimum condition of TNTs concentration in TiO₂ composites film, series of DSSCs with different TNTs concentration were made. In this optimum condition (DSSCs with 10 wt% of TNT), the effects of post treatment are compared for different TiCl₄ concentrations. The results show that the DSSCs using a TiCl₄ (90 mM) post treatment shows a maximum conversion efficiency of 7.83% due to effective electron transport and enhanced adsorption of dye on TiO₂ surface.

| S-EPMC5453211 | biostudies-other

Surfactant free most probable TiO? nanostructures via hydrothermal and its dye sensitized solar cell properties.

Project description:Tailoring the nano-morphology and nano-architecture of titanium dioxide (TiO?) is the most important task in the third generation solar cells (Dye sensitized solar cells/Quantum dot sensitized solar cells) (DSSCs/QDSSCs). In this article we present complete study of surfactant free synthesis of TiO? nanostructures by a simple and promising hydrothermal route. The plethora of nanostructures like nanoparticles clusters, 1D tetragonal nanorods, 3D dendrites containing nanorods having <30?nm diameter and 3D hollow urchin like have been synthesized. These nanostructures possess effective large surface area and thus useful in DSSCs. In the present work, 7.16% power conversion efficiency has been demonstrated for 3D dendritic hollow urchin like morphology. Our synthetic strategy provides an effective solution for surfactant free synthesis of efficient TiO? nanoarchitectures.

| S-EPMC3801147 | biostudies-literature

Hydrothermal fabrication of hierarchically anatase TiO2 nanowire arrays on FTO glass for dye-sensitized solar cells.

Project description:Hierarchical anatase TiO(2) nano-architecture arrays consisting of long TiO(2) nanowire trunk and numerous short TiO(2) nanorod branches on transparent conductive fluorine-doped tin oxide glass are successfully synthesized for the first time through a facile one-step hydrothermal route without any surfactant and template. Dye-sensitized solar cells based on the hierarchical anatase TiO(2) nano-architecture array photoelectrode of 18 ?m in length shows a power conversion efficiency of 7.34% because of its higher specific surface area for adsorbing more dye molecules and superior light scattering capacity for boosting the light-harvesting efficiency. The present photovoltaic performance is the highest value for the reported TiO(2) nanowires array photoelectrode.

| S-EPMC3583000 | biostudies-literature

The dye-sensitized solar cell database.

Project description:BackgroundDye-sensitized solar cells (DSSCs) have garnered a lot of attention in recent years. The solar energy to power conversion efficiency of a DSSC is influenced by various components of the cell such as the dye, electrolyte, electrodes and additives among others leading to varying experimental configurations. A large number of metal-based and metal-free dye sensitizers have now been reported and tools using such data to indicate new directions for design and development are on the rise.DescriptionDSSCDB, the first of its kind dye-sensitized solar cell database, aims to provide users with up-to-date information from publications on the molecular structures of the dyes, experimental details and reported measurements (efficiencies and spectral properties) and thereby facilitate a comprehensive and critical evaluation of the data. Currently, the DSSCDB contains over 4000 experimental observations spanning multiple dye classes such as triphenylamines, carbazoles, coumarins, phenothiazines, ruthenium and porphyrins.ConclusionThe DSSCDB offers a web-based, comprehensive source of property data for dye sensitized solar cells. Access to the database is available through the following URL: www.dyedb.com .

| S-EPMC5882482 | biostudies-literature

Polyaniline-Layered Rutile TiO<sub>2</sub> Nanorods as Alternative Photoanode in Dye-Sensitized Solar Cells.

Project description:In this paper, dye-sensitized solar cell (DSSC) performance of the less explored polymorph of TiO2, rutile, has been explored, and its performance has been modified with polyaniline (PANI) wrapping on the surface. For this purpose, highly crystalline rutile nanorods have been synthesized without any growth-directing substrates, employing a hydrothermal treatment. Further, to understand the phase composition and morphology, the synthesized nanorods and PANI-layered nanorods have been characterized through various physicochemical methods. The synthesized rods were implemented as photoanode material for DSSCs which exhibited a photoelectric conversion efficiency (PCE) of 4.28% with a high open-circuit voltage (V OC) of 0.84 V which is highly superior to DSSC with Degussa P25 (PCE = 3.95%) TiO2 nanoparticles. The resultant PCE of the nanorods was further enhanced to 6.23% on in situ deposition of PANI which acts as an electron-transporting layer. Introduction of conducting PANI over the rutile rod was explored as a new concept to improve the performance of photoanode material besides conventional TiCl4 treatment or scattering layer deposition.

| S-EPMC6647995 | biostudies-literature

Large-diameter titanium dioxide nanotube arrays as a scattering layer for high-efficiency dye-sensitized solar cell.

Project description:Large-sized titanium dioxide (TiO2) nanotube arrays with an outer diameter of approximately 500 nm have been successfully synthesized by potentiostatic anodization at 180 V in a used electrolyte with the addition of 1.5 M lactic acid. It is found that the synthesized large-diameter TiO2 nanotube array shows a superior light scattering ability, which can be used as a light scattering layer to significantly enhance the efficiency of TiO2 nanoparticle-based dye-sensitized solar cells from 5.18% to 6.15%. The remarkable light scattering ability makes the large-diameter TiO2 nanotube array a promising candidate for light management in dye-sensitized solar cells (DSSCs).

| S-EPMC4108594 | biostudies-literature

Enhanced Efficiency in Dye-Sensitized Solar Cells by Electron Transport and Light Scattering on Freestanding TiO₂ Nanotube Arrays.

Project description:Dye-sensitized solar cells (DSSCs) were fabricated with closed- or open-ended freestanding TiO₂ nanotube arrays as photoelectrodes that were decorated with carbon materials and large TiO₂ nanoparticles (NPs) to enhance energy conversion efficiency. The energy conversion efficiency of DSSCs based on open-ended freestanding TiO₂ nanotube arrays increased from 4.47% to 5.39%, compared to the DSSCs based on closed-ended freestanding TiO₂ nanotube arrays. In DSSCs based on the open-ended freestanding TiO₂ nanotube arrays, the energy conversion efficiency with carbon materials increased from 5.39% to 6.19% due to better electron transport, and that with a scattering layer from 5.39% to 6.24% due to more light harvesting compared to the DSSCs without carbon materials or scattering layer. Moreover, the energy conversion efficiency of DSSCs based on the open-ended freestanding TiO₂ nanotube arrays with both carbon materials and scattering layer increased from 5.39% to 6.98%, which is an enhancement of 29.50%. In DSSCs based on the TiO₂ nanotube arrays, the carbon materials can improve electron transport by π-π conjugation, and the large TiO₂ NPs can enhance the capacity to light-harvest by scattering.

| S-EPMC5666510 | biostudies-literature

A general method for preparing anatase TiO₂ treelike-nanoarrays on various metal wires for fiber dye-sensitized solar cells.

Project description:Anatase TiO2 tree-like nanoarrays were prepared on various metal wires (Ti, W, Ni, etc.) through one-step facile hydrothermal reaction. The anatase TiO2 tree-like nanoarrays consist of long TiO2 nanowire trunks with direct charge transport channels, and a large number of short TiO2 nanorod branches with large surface areas. Fiber dye-sensitized solar cells (FDSSCs) based on the anatase TiO2 tree-like nanoarrays deposited on Ti wires can achieve outstanding power conversion efficiency (PCE) of 6.32%, while FDSSCs on W wires have lower PCE of 3.24% due to the formation of WO3 layer, which might enhance recombination of charges. When the substrate is changed to a Nicole oxide wire, a novel p-n heterojunction can be obtained. This universal method is simple, facile, and low cost for preparing anatase TiO2 treelike-nanoarrays on various metal wires, which may find potential applications in fabrication of optoelectronic devices.

| S-EPMC3960580 | biostudies-literature

Photovoltaic Effects of Dye-Sensitized Solar Cells Using Double-Layered TiO<sub>2</sub> Photoelectrodes and Pyrazine-Based Photosensitizers.

Project description:In this study, to obtain high performances of the dye-sensitized solar cells using the optimal TiO2 photoelectrode for the synthesized pyrazine-based organic photosensitizers, three types of TiO2 photoelectrodes were fabricated and evaluated for comparison. The double-layered nanoporous TiO2 photoelectrode (SPD type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer. The single-layered nanoporous TiO2 photoelectrodes (D type and SP type) consisted of a dispersed TiO2 layer and a transparent TiO2 layer, respectively. The surface area, pore volume, and crystalline structures of the three types of TiO2 photoelectrodes were analyzed by Brunauer-Emmett-Teller method, field-emission scanning electron microscopy, and X-ray diffractometry to confirm their crystallinity and surface morphology. The structures of the three types of TiO2 photoelectrode-adsorbed organic sensitizers were investigated using X-ray photoelectron spectroscopy. The photovoltaic performances of DSSC devices using three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes were investigated under a light intensity of 100 mW/cm2 at AM 1.5. The DSSC device using double-layered SPD type TiO2 photoelectrodes displayed 1.31∼2.64% efficiency, compared to single-layered SP type TiO2 photoelectrodes (1.31∼2.50%) and D type TiO2 photoelectrodes (0.90∼1.54%), using organic photosensitizers. The DSSC device using the SPD type TiO2 photoelectrode and trifluoromethylbenzopyrazine (TPPF) as a photosensitizer showed the highest performances: J sc of 5.69 mA/cm2, V oc of 0.69 V, FF of 0.67, and efficiency of 2.64%. The relationship between photovoltaic effects and interfacial resistance characteristics of DSSCs using the three organic photosensitizers adsorbed onto the three types of TiO2 photoelectrodes could be interpreted from interfacial resistances according to frequency through impedance analysis.

| S-EPMC10134224 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data