Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Hall sensors batch-fabricated on all-CVD h-BN/graphene/h-BN heterostructures.

ABSTRACT: The two-dimensional (2D) material graphene is highly promising for Hall sensors due to its potential of having high charge carrier mobility and low carrier concentration at room temperature. Here, we report the scalable batch-fabrication of magnetic Hall sensors on graphene encapsulated in hexagonal boron nitride (h-BN) using commercially available large area CVD grown materials. The all-CVD grown h-BN/graphene/h-BN van der Waals heterostructures were prepared by layer transfer technique and Hall sensors were batch-fabricated with 1D edge metal contacts. The current-related Hall sensitivities up to 97 V/AT are measured at room temperature. The Hall sensors showed robust performance over the wafer scale with stable characteristics over six months in ambient environment. This work opens avenues for further development of growth and fabrication technologies of all-CVD 2D material heterostructures and allows further improvements in Hall sensor performance for practical applications.

SUBMITTER: Dankert A

PROVIDER: S-EPMC5680335 | biostudies-literature | 2017 Nov

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Hall sensors batch-fabricated on all-CVD h-BN/graphene/h-BN heterostructures.

Dankert André A Karpiak Bogdan B Dash Saroj P SP

Scientific reports 20171109 1

The two-dimensional (2D) material graphene is highly promising for Hall sensors due to its potential of having high charge carrier mobility and low carrier concentration at room temperature. Here, we report the scalable batch-fabrication of magnetic Hall sensors on graphene encapsulated in hexagonal boron nitride (h-BN) using commercially available large area CVD grown materials. The all-CVD grown h-BN/graphene/h-BN van der Waals heterostructures were prepared by layer transfer technique and Hal ...[more]

PMID: 29123124

Similar Datasets

Batch-fabricated high-performance graphene Hall elements.

Project description:Hall elements are by far the most widely used magnetic sensor. In general, the higher the mobility and the thinner the active region of the semiconductor used, the better the Hall device. While most common magnetic field sensors are Si-based Hall sensors, devices made from III-V compounds tend to favor over that based on Si. However these devices are more expensive and difficult to manufacture than Si, and hard to be integrated with signal-processing circuits for extending function and enforcing performance. In this article we show that graphene is intrinsically an ideal material for Hall elements which may harness the remarkable properties of graphene, i.e. extremely high carrier mobility and atomically thin active body, to create ideal magnetic sensors with high sensitivity, excellent linearity and remarkable thermal stability.

| S-EPMC3563039 | biostudies-literature

Growth of Graphene/h-BN Heterostructures on Recyclable Pt Foils by One-Batch Chemical Vapor Deposition.

Project description:High-quality large-area graphene/h-BN vertical heterostructures are promising building blocks for many viable applications such as energy harvesting/conversion, electronics and optoelectronics. Here, we successfully grew high-quality large-area graphene/h-BN vertical heterostructures on Pt foils by one-batch low-pressure chemical vapor deposition (LPCVD). We obtained the high quality of about 200-µm-wide graphene/h-BN film having uniform layer thickness. Moreover, the obtained graphene/h-BN heterostructures exhibited field effect mobility of up to 7,200 cm2V-1s-1 at room temperature. These results suggest that such graphene/h-BN heterostructures on recyclable Pt foils grown by LPCVD are promising for high-performance graphene-based electronics.

| S-EPMC5719054 | biostudies-literature

Postsynthesis of h-BN/Graphene Heterostructures Inside a STEM.

Project description:Combinations of 2D materials with different physical properties can form heterostructures with modified electrical, mechanical, magnetic, and optical properties. The direct observation of a lateral heterostructure synthesis is reported by epitaxial in-plane graphene growth from the step-edge of hexagonal BN (h-BN) within a scanning transmission electron microscope chamber. Residual hydrocarbon in the chamber is the carbon source. The growth interface between h-BN and graphene is atomically identified as largely N-C bonds. This postgrowth method can form graphene nanoribbons connecting two h-BN domains with different twisting angles, as well as isolated carbon islands with arbitrary shapes embedded in the h-BN layer. The electronic properties of the vertically stacked h-BN/graphene heterostructures are investigated by electron energy-loss spectroscopy (EELS). Low-loss EELS analysis of the dielectric response suggests a robust coupling effect between the graphene and h-BN layers.

| S-EPMC4738398 | biostudies-literature

Graphene/h-BN Heterostructures for Vertical Architecture of RRAM Design.

Project description:The development of RRAM is one of the mainstreams for next generation non-volatile memories to replace the conventional charge-based flash memory. More importantly, the simpler structure of RRAM makes it feasible to be integrated into a passive crossbar array for high-density memory applications. By stacking up the crossbar arrays, the ultra-high density of 3D horizontal RRAM (3D-HRAM) can be realized. However, 3D-HRAM requires critical lithography and other process for every stacked layer, and this fabrication cost overhead increases linearly with the number of stacks. Here, it is demonstrated that the 2D material-based vertical RRAM structure composed of graphene plane electrode/multilayer h-BN insulating dielectric stacked layers, AlOx/TiOx resistive switching layer and ITO pillar electrode exhibits reliable device performance including forming-free, low power consumption (Pset?=?~2??W and Preset?=?~0.2??W), and large memory window (>300). The scanning transmission electron microscopy indicates that the thickness of multilayer h-BN is around 2?nm. Due to the ultrathin-insulating dielectric and naturally high thermal conductivity characteristics of h-BN, the vertical structure combining the graphene plane electrode with multilayer h-BN insulating dielectric can pave the way toward a new area of ultra high-density memory integration in the future.

| S-EPMC5575158 | biostudies-literature

Digital Biosensing by Foundry-Fabricated Graphene Sensors.

Project description:The prevailing philosophy in biological testing has been to focus on simple tests with easy to interpret information such as ELISA or lateral flow assays. At the same time, there has been a decades long understanding in device physics and nanotechnology that electrical approaches have the potential to drastically improve the quality, speed, and cost of biological testing provided that computational resources are available to analyze the resulting complex data. This concept can be conceived of as "the internet of biology" in the same way miniaturized electronic sensors have enabled "the internet of things." It is well established in the nanotechnology literature that techniques such as field effect biosensing are capable of rapid and flexible biological testing. Until now, access to this new technology has been limited to academic researchers focused on bioelectronic devices and their collaborators. Here we show that this capability is retained in an industrially manufactured device, opening access to this technology generally. Access to this type of production opens the door for rapid deployment of nanoelectronic sensors outside the research space. The low power and resource usage of these biosensors enables biotech engineers to gain immediate control over precise biological and environmental data.

| S-EPMC6342992 | biostudies-literature

Vibrational Properties of h-BN and h-BN-Graphene Heterostructures Probed by Inelastic Electron Tunneling Spectroscopy.

Project description:Inelastic electron tunneling spectroscopy is a powerful technique for investigating lattice dynamics of nanoscale systems including graphene and small molecules, but establishing a stable tunnel junction is considered as a major hurdle in expanding the scope of tunneling experiments. Hexagonal boron nitride is a pivotal component in two-dimensional Van der Waals heterostructures as a high-quality insulating material due to its large energy gap and chemical-mechanical stability. Here we present planar graphene/h-BN-heterostructure tunneling devices utilizing thin h-BN as a tunneling insulator. With much improved h-BN-tunneling-junction stability, we are able to probe all possible phonon modes of h-BN and graphite/graphene at ? and K high symmetry points by inelastic tunneling spectroscopy. Additionally, we observe that low-frequency out-of-plane vibrations of h-BN and graphene lattices are significantly modified at heterostructure interfaces. Equipped with an external back gate, we can also detect high-order coupling phenomena between phonons and plasmons, demonstrating that h-BN-based tunneling device is a wonderful playground for investigating electron-phonon couplings in low-dimensional systems.

| S-EPMC4643226 | biostudies-literature

Cross-plane Thermoelectric and Thermionic Transport across Au/h-BN/Graphene Heterostructures.

Project description:The thermoelectric voltage generated at an atomically abrupt interface has not been studied exclusively because of the lack of established measurement tools and techniques. Atomically thin 2D materials provide an excellent platform for studying the thermoelectric transport at these interfaces. Here, we report a novel technique and device structure to probe the thermoelectric transport across Au/h-BN/graphene heterostructures. An indium tin oxide (ITO) transparent electrical heater is patterned on top of this heterostructure, enabling Raman spectroscopy and thermometry to be obtained from the graphene top electrode in situ under device operating conditions. Here, an AC voltage V(?) is applied to the ITO heater and the thermoelectric voltage across the Au/h-BN/graphene heterostructure is measured at 2? using a lock-in amplifier. We report the Seebeck coefficient for our thermoelectric structure to be -215 ?V/K. The Au/graphene/h-BN heterostructures enable us to explore thermoelectric and thermal transport on nanometer length scales in a regime of extremely short length scales. The thermoelectric voltage generated at the graphene/h-BN interface is due to thermionic emission rather than bulk diffusive transport. As such, this should be thought of as an interfacial Seebeck coefficient rather than a Seebeck coefficient of the constituent materials.

| S-EPMC5658445 | biostudies-literature

Magnetic field detection limits for ultraclean graphene Hall sensors.

Project description:Solid-state magnetic field sensors are important for applications in commercial electronics and fundamental materials research. Most magnetic field sensors function in a limited range of temperature and magnetic field, but Hall sensors in principle operate over a broad range of these conditions. Here, we evaluate ultraclean graphene as a material platform for high-performance Hall sensors. We fabricate micrometer-scale devices from graphene encapsulated with hexagonal boron nitride and few-layer graphite. We optimize the magnetic field detection limit under different conditions. At 1 kHz for a 1 μm device, we estimate a detection limit of 700 nT Hz-1/2 at room temperature, 80 nT Hz-1/2 at 4.2 K, and 3 μT Hz-1/2 in 3 T background field at 4.2 K. Our devices perform similarly to the best Hall sensors reported in the literature at room temperature, outperform other Hall sensors at 4.2 K, and demonstrate high performance in a few-Tesla magnetic field at which the sensors exhibit the quantum Hall effect.

| S-EPMC7441171 | biostudies-literature

Synthesis of AAB-Stacked Single-Crystal Graphene/hBN/Graphene Trilayer van der Waals Heterostructures by In Situ CVD.

Project description:van der Waals heterostructures based on graphene and hBN layers with different stacking modes are receiving considerable attention because of their potential application in fundamental physics. However, conventional exfoliation fabrication methods and layer-by-layer transfer techniques have various limitations. The CVD synthesis of high-quality large-area graphene and hBN multilayer heterostructures is essential for the advancement of new physics. Herein, the authors propose an in situ CVD growth strategy for synthesizing wafer-scale AAB-stacked single-crystal graphene/hBN/graphene trilayer van der Waals heterostructures. Single-crystal CuNi(111) alloys are prepared on sapphire, followed by the pre-dissolution of carbon atoms. Single-crystal monolayer hBN is synthesized on a plasma-cleaned CuNi(111) surface. Then, a single-crystal monolayer graphene is epitaxially grown onto the hBN surface to form graphene/hBN bilayer heterostructures. A controlled decrease in the growth temperature allows the carbon atoms to precipitate out of the CuNi(111) alloy to form single-crystal graphene at the interface between hBN and CuNi(111), thereby producing graphene/hBN/graphene trilayer van der Waals heterostructures. The stacking modes between as-grown 2D layers are investigated through Raman spectroscopy and transmission electron microscopy. This study provides an in situ CVD approach to directly synthesize large-scale single-crystal low-dimensional van der Waals heterostructures and facilitates their application in future 2D-material-based integrated circuits.

| S-EPMC9313474 | biostudies-literature

Transferless Inverted Graphene/Silicon Heterostructures Prepared by Plasma-Enhanced Chemical Vapor Deposition of Amorphous Silicon on CVD Graphene.

Project description:The heterostructures of two-dimensional (2D) and three-dimensional (3D) materials represent one of the focal points of current nanotechnology research and development. From an application perspective, the possibility of a direct integration of active 2D layers with exceptional optoelectronic and mechanical properties into the existing semiconductor manufacturing processes is extremely appealing. However, for this purpose, 2D materials should ideally be grown directly on 3D substrates to avoid the transferring step, which induces damage and contamination of the 2D layer. Alternatively, when such an approach is difficult-as is the case of graphene on noncatalytic substrates such as Si-inverted structures can be created, where the 3D material is deposited onto the 2D substrate. In the present work, we investigated the possibility of using plasma-enhanced chemical vapor deposition (PECVD) to deposit amorphous hydrogenated Si (a-Si:H) onto graphene resting on a catalytic copper foil. The resulting stacks created at different Si deposition temperatures were investigated by the combination of Raman spectroscopy (to quantify the damage and to estimate the change in resistivity of graphene), temperature-dependent dark conductivity, and constant photocurrent measurements (to monitor the changes in the electronic properties of a-Si:H). The results indicate that the optimum is 100 C deposition temperature, where the graphene still retains most of its properties and the a-Si:H layer presents high-quality, device-ready characteristics.

| S-EPMC7153506 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data