Browse
Submit Data
Databases
API
Help

Dataset Information

25 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Growth of Graphene/h-BN Heterostructures on Recyclable Pt Foils by One-Batch Chemical Vapor Deposition.

ABSTRACT: High-quality large-area graphene/h-BN vertical heterostructures are promising building blocks for many viable applications such as energy harvesting/conversion, electronics and optoelectronics. Here, we successfully grew high-quality large-area graphene/h-BN vertical heterostructures on Pt foils by one-batch low-pressure chemical vapor deposition (LPCVD). We obtained the high quality of about 200-µm-wide graphene/h-BN film having uniform layer thickness. Moreover, the obtained graphene/h-BN heterostructures exhibited field effect mobility of up to 7,200 cm2V-1s-1 at room temperature. These results suggest that such graphene/h-BN heterostructures on recyclable Pt foils grown by LPCVD are promising for high-performance graphene-based electronics.

SUBMITTER: Qian Y

PROVIDER: S-EPMC5719054 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Growth of Graphene/h-BN Heterostructures on Recyclable Pt Foils by One-Batch Chemical Vapor Deposition.

Qian Yongteng Y Van Ngoc Huynh H Kang Dae Joon DJ

Scientific reports 20171206 1

High-quality large-area graphene/h-BN vertical heterostructures are promising building blocks for many viable applications such as energy harvesting/conversion, electronics and optoelectronics. Here, we successfully grew high-quality large-area graphene/h-BN vertical heterostructures on Pt foils by one-batch low-pressure chemical vapor deposition (LPCVD). We obtained the high quality of about 200-µm-wide graphene/h-BN film having uniform layer thickness. Moreover, the obtained graphene/h-BN hete ...[more]

PMID: 29213064

Similar Datasets

Hall sensors batch-fabricated on all-CVD h-BN/graphene/h-BN heterostructures.

Project description:The two-dimensional (2D) material graphene is highly promising for Hall sensors due to its potential of having high charge carrier mobility and low carrier concentration at room temperature. Here, we report the scalable batch-fabrication of magnetic Hall sensors on graphene encapsulated in hexagonal boron nitride (h-BN) using commercially available large area CVD grown materials. The all-CVD grown h-BN/graphene/h-BN van der Waals heterostructures were prepared by layer transfer technique and Hall sensors were batch-fabricated with 1D edge metal contacts. The current-related Hall sensitivities up to 97 V/AT are measured at room temperature. The Hall sensors showed robust performance over the wafer scale with stable characteristics over six months in ambient environment. This work opens avenues for further development of growth and fabrication technologies of all-CVD 2D material heterostructures and allows further improvements in Hall sensor performance for practical applications.

| S-EPMC5680335 | biostudies-literature

Growth of millimeter-size single crystal graphene on Cu foils by circumfluence chemical vapor deposition.

Project description:A simply and reproducible way is proposed to significantly suppress the nucleation density of graphene on the copper foil during the chemical vapor deposition process. By inserting a copper foil into a tube with one close end, the nucleation density on the copper foils can be reduced by more than five orders of magnitude and an ultra-low nucleation density of ~10?nucleus/cm(2) has been achieved. The structural analyses demonstrate that single crystal monolayer graphene with a lateral size of 1.9?mm can be grown on the copper foils under the optimized growth condition. The electrical transport studies show that the mobility of such single crystal graphene is around 2400?cm(2)/Vs.

| S-EPMC3971397 | biostudies-literature

Transferless Inverted Graphene/Silicon Heterostructures Prepared by Plasma-Enhanced Chemical Vapor Deposition of Amorphous Silicon on CVD Graphene.

Project description:The heterostructures of two-dimensional (2D) and three-dimensional (3D) materials represent one of the focal points of current nanotechnology research and development. From an application perspective, the possibility of a direct integration of active 2D layers with exceptional optoelectronic and mechanical properties into the existing semiconductor manufacturing processes is extremely appealing. However, for this purpose, 2D materials should ideally be grown directly on 3D substrates to avoid the transferring step, which induces damage and contamination of the 2D layer. Alternatively, when such an approach is difficult-as is the case of graphene on noncatalytic substrates such as Si-inverted structures can be created, where the 3D material is deposited onto the 2D substrate. In the present work, we investigated the possibility of using plasma-enhanced chemical vapor deposition (PECVD) to deposit amorphous hydrogenated Si (a-Si:H) onto graphene resting on a catalytic copper foil. The resulting stacks created at different Si deposition temperatures were investigated by the combination of Raman spectroscopy (to quantify the damage and to estimate the change in resistivity of graphene), temperature-dependent dark conductivity, and constant photocurrent measurements (to monitor the changes in the electronic properties of a-Si:H). The results indicate that the optimum is 100 C deposition temperature, where the graphene still retains most of its properties and the a-Si:H layer presents high-quality, device-ready characteristics.

| S-EPMC7153506 | biostudies-literature

Continuous growth of hexagonal graphene and boron nitride in-plane heterostructures by atmospheric pressure chemical vapor deposition.

Project description:Graphene-boron nitride monolayer heterostructures contain adjacent electrically active and insulating regions in a continuous, single-atom thick layer. To date structures were grown at low pressure, resulting in irregular shapes and edge direction, so studies of the graphene-boron nitride interface were restricted to the microscopy of nanodomains. Here we report templated growth of single crystalline hexagonal boron nitride directly from the oriented edge of hexagonal graphene flakes by atmospheric pressure chemical vapor deposition, and physical property measurements that inform the design of in-plane hybrid electronics. Ribbons of boron nitride monolayer were grown from the edge of a graphene template and inherited its crystallographic orientation. The relative sharpness of the interface was tuned through control of growth conditions. Frequent tearing at the graphene-boron nitride interface was observed, so density functional theory was used to determine that the nitrogen-terminated interface was prone to instability during cool down. The electronic functionality of monolayer heterostructures was demonstrated through fabrication of field effect transistors with boron nitride as an in-plane gate dielectric.

| S-EPMC5736965 | biostudies-literature

Chemical Vapor-Deposited Graphene on Ultraflat Copper Foils for van der Waals Hetero-Assembly.

Project description:The purity and morphology of the copper surface is important for the synthesis of high-quality, large-grained graphene by chemical vapor deposition. We find that atomically smooth copper foils-fabricated by physical vapor deposition and subsequent electroplating of copper on silicon wafer templates-exhibit strongly reduced surface roughness after the annealing of the copper catalyst, and correspondingly lower nucleation and defect density of the graphene film, when compared to commercial cold-rolled copper foils. The "ultrafoils"-ultraflat foils-facilitate easier dry pickup and encapsulation of graphene by hexagonal boron nitride, which we believe is due to the lower roughness of the catalyst surface promoting a conformal interface and subsequent stronger van der Waals adhesion between graphene and hexagonal boron nitride.

| S-EPMC9260747 | biostudies-literature

Top-gated chemical vapor deposition grown graphene transistors with current saturation.

Project description:Graphene transistors are of considerable interest for radio frequency (rf) applications. In general, transistors with large transconductance and drain current saturation are desirable for rf performance, which is however nontrivial to achieve in graphene transistors. Here we report high-performance top-gated graphene transistors based on chemical vapor deposition (CVD) grown graphene with large transconductance and drain current saturation. The graphene transistors were fabricated with evaporated high dielectric constant material (HfO(2)) as the top-gate dielectrics. Length scaling studies of the transistors with channel length from 5.6 ?m to 100 nm show that complete current saturation can be achieved in 5.6 ?m devices and the saturation characteristics degrade as the channel length shrinks down to the 100-300 nm regime. The drain current saturation was primarily attributed to drain bias induced shift of the Dirac points. With the selective deposition of HfO(2) gate dielectrics, we have further demonstrated a simple scheme to realize a 300 nm channel length graphene transistors with self-aligned source-drain electrodes to achieve the highest transconductance of 250 ?S/?m reported in CVD graphene to date.

| S-EPMC3236244 | biostudies-literature

Direct tuning of graphene work function via chemical vapor deposition control.

Project description:Besides its unprecedented physical and chemical characteristics, graphene is also well known for its formidable potential of being a next-generation device material. Work function (WF) of graphene is a crucial factor in the fabrication of graphene-based electronic devices because it determines the energy band alignment and whether the contact in the interface is Ohmic or Schottky. Tuning of graphene WF, therefore, is strongly demanded in many types of electronic and optoelectronic devices. Whereas study on work function tuning induced by doping or chemical functionalization has been widely conducted, attempt to tune the WF of graphene by controlling chemical vapor deposition (CVD) condition is not sufficient in spite of its simplicity. Here we report the successful WF tuning method for graphene grown on a Cu foil with a novel CVD growth recipe, in which the CH4/H2 gas ratio is changed. Kelvin probe force microscopy (KPFM) verifies that the WF-tuned regions, where the WF increases by the order of ~250 meV, coexist with the regions of intrinsic WF within a single graphene flake. By combining KPFM with lateral force microscopy (LFM), it is demonstrated that the WF-tuned area can be manipulated by pressing it with an atomic force microscopy (AFM) tip and the tuned WF returns to the intrinsic WF of graphene. A highly plausible mechanism for the WF tuning is suggested, in which the increased graphene-substrate distance by excess H2 gases may cause the WF increase within a single graphene flake. This novel WF tuning method via a simple CVD growth control provides a new direction to manipulate the WF of various 2-dimensional nanosheets as well as graphene.

| S-EPMC7303148 | biostudies-literature

Contamination-free graphene by chemical vapor deposition in quartz furnaces.

Project description:Although the growth of graphene by chemical vapor deposition is a production technique that guarantees high crystallinity and superior electronic properties on large areas, it is still a challenge for manufacturers to efficiently scale up the production to the industrial scale. In this context, issues related to the purity and reproducibility of the graphene batches exist and need to be tackled. When graphene is grown in quartz furnaces, in particular, it is common to end up with samples contaminated by heterogeneous particles, which alter the growth mechanism and affect graphene's properties. In this paper, we fully unveil the source of such contaminations and explain how they create during the growth process. We further propose a modification of the widely used quartz furnace configuration to fully suppress the sample contamination and obtain identical and clean graphene batches on large areas.

| S-EPMC5577164 | biostudies-other

Postsynthesis of h-BN/Graphene Heterostructures Inside a STEM.

Project description:Combinations of 2D materials with different physical properties can form heterostructures with modified electrical, mechanical, magnetic, and optical properties. The direct observation of a lateral heterostructure synthesis is reported by epitaxial in-plane graphene growth from the step-edge of hexagonal BN (h-BN) within a scanning transmission electron microscope chamber. Residual hydrocarbon in the chamber is the carbon source. The growth interface between h-BN and graphene is atomically identified as largely N-C bonds. This postgrowth method can form graphene nanoribbons connecting two h-BN domains with different twisting angles, as well as isolated carbon islands with arbitrary shapes embedded in the h-BN layer. The electronic properties of the vertically stacked h-BN/graphene heterostructures are investigated by electron energy-loss spectroscopy (EELS). Low-loss EELS analysis of the dielectric response suggests a robust coupling effect between the graphene and h-BN layers.

| S-EPMC4738398 | biostudies-literature

Formation mechanism of overlapping grain boundaries in graphene chemical vapor deposition growth.

Project description:The formation of grain boundaries (GBs) in graphene films is both fundamentally interesting and practically important for many applications. A GB in graphene is known as a linear defect and is formed during the coalescence of two single crystalline graphene domains. The covalent binding between domains is broadly known as the mechanism of GB formation during graphene chemical vapor deposition (CVD) growth. Here, we demonstrate another GB formation mechanism, where two graphene domains are connected by weak van der Waals interactions between overlapping graphene layers. The formation mechanism of the overlapping GBs (OLGBs) is systematically explored theoretically and the proposed conditions for forming OLGBs are validated by experimental observations. This discovery leads to a deep understanding of the mechanism of graphene CVD growth and reveals potential means for graphene quality control in CVD synthesis.

| S-EPMC5408562 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data