Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Harnessing heterogeneous nucleation to control tin orientations in electronic interconnections.

ABSTRACT: While many aspects of electronics manufacturing are controlled with great precision, the nucleation of tin in solder joints is currently left to chance. This leads to a widely varying melt undercooling and different crystal orientations in each joint, which results in a different resistance to electromigration, thermomechanical fatigue, and other failure modes in each joint. Here we identify a family of nucleants for tin, prove their effectiveness using a novel droplet solidification technique, and demonstrate an approach to incorporate the nucleants into solder joints to control the orientation of the tin nucleation event. With this approach, it is possible to change tin nucleation from a stochastic to a deterministic process, and to generate single-crystal joints with their c-axis orientation tailored to best combat a selected failure mode.

SUBMITTER: Ma ZL

PROVIDER: S-EPMC5715011 | biostudies-literature | 2017 Dec

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Harnessing heterogeneous nucleation to control tin orientations in electronic interconnections.

Ma Z L ZL Belyakov S A SA Sweatman K K Nishimura T T Nishimura T T Gourlay C M CM

Nature communications 20171204 1

While many aspects of electronics manufacturing are controlled with great precision, the nucleation of tin in solder joints is currently left to chance. This leads to a widely varying melt undercooling and different crystal orientations in each joint, which results in a different resistance to electromigration, thermomechanical fatigue, and other failure modes in each joint. Here we identify a family of nucleants for tin, prove their effectiveness using a novel droplet solidification technique, ...[more]

PMID: 29203763

Similar Datasets

In situ imaging of microstructure formation in electronic interconnections.

Project description:The development of microstructure during melting, reactive wetting and solidification of solder pastes on Cu-plated printed circuit boards has been studied by synchrotron radiography. Using Sn-3.0Ag-0.5Cu/Cu and Sn-0.7Cu/Cu as examples, we show that the interfacial Cu6Sn5 layer is present within 0.05?s of wetting, and explore the kinetics of flux void formation at the interface between the liquid and the Cu6Sn5 layer. Quantification of the nucleation locations and anisotropic growth kinetics of primary Cu6Sn5 crystals reveals a competition between the nucleation of Cu6Sn5 in the liquid versus growth of Cu6Sn5 from the existing Cu6Sn5 layer. Direct imaging confirms that the ?-Sn nucleates at/near the Cu6Sn5 layer in Sn-3.0Ag-0.5Cu/Cu joints.

| S-EPMC5227712 | biostudies-literature

?-Amyloid aggregation and heterogeneous nucleation.

Project description:In this article, we consider the role of heterogeneous nucleation in ?-amyloid aggregation. Heterogeneous nucleation is more common and occurs at lower levels of supersaturation than homogeneous nucleation. The nucleation period is also the stage at which most of the polymorphism of amyloids arises, this being one of the defining features of amyloids. We focus on several well-known heterogeneous nucleators of ?-amyloid, including lipid surfaces, especially those enriched in gangliosides and cholesterol, and divalent metal ions. These two broad classes of nucleators affect ?-amyloid particularly in light of the amphiphilicity of these peptides: the N-terminal region, which is largely polar and charged, contains the metal binding site, whereas the C-terminal region is aliphatic and is important in lipid binding. Notably, these two classes of nucleators can interact cooperatively, aggregation begetting greater aggregation.

| S-EPMC6699094 | biostudies-literature

Magnetic control of heterogeneous ice nucleation with nanophase magnetite: Biophysical and agricultural implications.

Project description:In supercooled water, ice nucleation is a stochastic process that requires ?250-300 molecules to transiently achieve structural ordering before an embryonic seed crystal can nucleate. This happens most easily on crystalline surfaces, in a process termed heterogeneous nucleation; without such surfaces, water droplets will supercool to below -30 °C before eventually freezing homogeneously. A variety of fundamental processes depends on heterogeneous ice nucleation, ranging from desert-blown dust inducing precipitation in clouds to frost resistance in plants. Recent experiments have shown that crystals of nanophase magnetite (Fe3O4) are powerful nucleation sites for this heterogeneous crystallization of ice, comparable to other materials like silver iodide and some cryobacterial peptides. In natural materials containing magnetite, its ferromagnetism offers the possibility that magneto-mechanical motion induced by external oscillating magnetic fields could act to disrupt the water-crystal interface, inhibiting the heterogeneous nucleation process in subfreezing water and promoting supercooling. For this to act, the magneto-mechanical rotation of the particles should be higher than the magnitude of Brownian motions. We report here that 10-Hz precessing magnetic fields, at strengths of 1 mT and above, on ?50-nm magnetite crystals dispersed in ultrapure water, meet these criteria and do indeed produce highly significant supercooling. Using these rotating magnetic fields, we were able to elicit supercooling in two representative plant and animal tissues (celery and bovine muscle), both of which have detectable, natural levels of ferromagnetic material. Tailoring magnetic oscillations for the magnetite particle size distribution in different tissues could maximize this supercooling effect.

| S-EPMC6003474 | biostudies-literature

Preferred orientations of garnet porphyroblasts reveal previously cryptic templating during nucleation.

Project description:Electron back scattered diffraction data of garnet crystals from the Nelson Aureole, British Columbia and the Mosher's Island formation, Nova Scotia, reveals that 22 garnet crystals are all oriented with one of three crystal directions parallel to the trace of the foliation plane in thin section. Structural models suggest that these relationships are due to preferential garnet nucleation onto muscovite, with the alignment of repeating rows of Al octahedra and Si tetrahedra in each leading to inheritance of garnet orientation from the muscovite. These results highlight that epitaxial nucleation may be a prevalent process by which porphyroblast minerals nucleate during metamorphism and carry implications for the role that non-classic nucleation pathways play in the crystallization of metamorphic minerals, the distribution of porphyroblasts in metamorphic rocks, and, in cases in which nucleation is the rate limiting step for crystallization, the energetics of metamorphic reactions.

| S-EPMC7994400 | biostudies-literature

Heterogeneous Ice Nucleation by Graphene Nanoparticles.

Project description:Nanostructure, chemical composition and size distribution of aerosols have prime important effects on their efficiency in heterogeneous ice nucleation (HIN). The ice nucleation usually requires active sites in the aerosols in order to act as ice nuclei (IN). In this study, HIN and probable active sites of the graphene-graphene oxide nanoparticles (GGON), obtained from graphite oxide by low temperature thermal shock (LTTS), were investigated. Characteristics and size distribution of the GGON were identified using scanning electron microscope (SEM) and image processing of the results, Fourier transform infrared spectroscopy (FTIR), Raman spectra and X-ray diffraction (XRD) of their sheets. The FTIR spectra indicate stronger carbon-oxygen bonds in the samples obtained by LTTS. In addition, maximum size distribution of the GGON was ranged around 160-180?nm. After introducing these particles in the cloud chamber, HIN has occurred and ice crystals were formed. Size distribution of crystals were obtained from image processing of the plates, where covered by a thin layer of Formvar, showed the number of ice crystals in the GGON were increased as temperature increased from -20?°C to -10?°C. In addition, two possible mechanisms of asymmetry and deformation in ice crystals of the GGON were described.

| S-EPMC7298023 | biostudies-literature

Effect of Electrosynthesis Potential on Nucleation, Growth, Adhesion, and Electronic Properties of Polypyrrole Thin Films on Fluorine-Doped Tin Oxide (FTO).

Project description:Polypyrrole (PPy) is one of the most attractive conducting polymers for thin film applications due to its good electrical conductivity, stability, optical properties, and biocompatibility. Among the technologies in which PPy has gained prominence are optoelectronics and solar energy conversion, where transparent electrodes such as fluorine-doped tin oxide (FTO) or indium tin oxide (ITO) are frequently used. However, FTO substrates have the notable advantage that their components are widely available in nature, unlike those of ITO. Recognizing the importance that the FTO/polypyrrole system has gained in various applications, here, we studied for the first time the nucleation and growth mechanism of electro-synthesized PPy on FTO. Additionally, the effect of the synthesis potential (0.9, 1.0, 1.1, and 1.2 V vs. Ag/AgCl) on the homogeneity, adhesion, conductivity, and HOMO energy levels of PPy films was determined. From current-time transients and scanning electron microscopy, it was found that films synthesized at 0.9 and 1.0 V exhibit 3D growth with progressive nucleation (as well as lower homogeneity and higher adhesion to FTO). In contrast, films synthesized at 1.1 and 1.2 V follow 2D growth with instantaneous nucleation. It was also evident that increasing the polymerization potential leads to polymers with lower conductivity and more negative HOMO levels (versus vacuum). These findings are relevant to encourage the use of electro-synthesized PPy in thin film applications that require a high control of material properties.

| S-EPMC8347362 | biostudies-literature

Routes to cubic ice through heterogeneous nucleation.

Project description:The freezing of water into ice is one of the most important processes in the physical sciences. However, it is still not understood at the molecular level. In particular, the crystallization of cubic ice ([Formula: see text])-rather than the traditional hexagonal polytype ([Formula: see text])-has become an increasingly debated topic. Although evidence for [Formula: see text] is thought to date back almost 400 y, it is only in the last year that pure [Formula: see text] has been made in the laboratory, and these processes involved high-pressure ice phases. Since this demonstrates that pure [Formula: see text] can form, the question naturally arises if [Formula: see text] can be made from liquid water. With this in mind, we have performed a high-throughput computational screening study involving molecular dynamics simulations of nucleation on over 1,100 model substrates. From these simulations, we find that 1) many different substrates can promote the formation of pristine [Formula: see text]; 2) [Formula: see text] can be selectively nucleated for even the mildest supercooling; 3) the water contact layer's resemblance to a face of ice is the key factor determining the polytype selectivity and nucleation temperature, independent of which polytype is promoted; and 4) substrate lattice match to ice is not indicative of the polytype obtained. Through this study, we have deepened understanding of the interplay of heterogeneous nucleation and ice I polytypism and suggest routes to [Formula: see text] More broadly, the substrate design methodology presented here combined with the insight gained can be used to understand and control polymorphism and stacking disorder in materials in general.

| S-EPMC8020660 | biostudies-literature

Enhanced heterogeneous ice nucleation by special surface geometry.

Project description:The freezing of water typically proceeds through impurity-mediated heterogeneous nucleation. Although non-planar geometry generically exists on the surfaces of ice nucleation centres, its role in nucleation remains poorly understood. Here we show that an atomically sharp, concave wedge can further promote ice nucleation with special wedge geometries. Our molecular analysis shows that significant enhancements of ice nucleation can emerge both when the geometry of a wedge matches the ice lattice and when such lattice match does not exist. In particular, a 45° wedge is found to greatly enhance ice nucleation by facilitating the formation of special topological defects that consequently catalyse the growth of regular ice. Our study not only highlights the active role of defects in nucleation but also suggests that the traditional concept of lattice match between a nucleation centre and crystalline lattice should be extended to include a broader match with metastable, non-crystalline structural motifs.

| S-EPMC5442314 | biostudies-literature

Interfacial Concentration Effect Facilitates Heterogeneous Nucleation from Solution.

Project description:Crystal nucleation from solution plays an important role in environmental, biological, and industrial processes and mainly occurs at interfaces, although the mechanisms are not well understood. We performed nucleation experiments on glycine aqueous solutions and found that an oil-solution interface dramatically accelerates glycine nucleation compared to an air-solution interface. This is surprising given that nonpolar, hydrophobic oil (tridecane) would not be expected to favor heterogeneous nucleation of highly polar, hydrophilic glycine. Molecular dynamics simulations found significantly enhanced vs depleted glycine concentrations at the oil-solution vs air-solution interfaces, respectively. We propose that this interfacial concentration effect facilitates heterogeneous nucleation, and that it is due to dispersion interactions. This interface effect is distinct from previously described mechanisms, including surface functionalization, templating, and confinement and is expected to be present in a wide range of solution systems. This work provides new insight that is essential for understanding and controlling heterogeneous nucleation.

| S-EPMC7145339 | biostudies-literature

Earthquake Nucleation Along Faults With Heterogeneous Weakening Rate.

Project description:The transition from quasistatic slip growth to dynamic rupture propagation constitutes one possible scenario to describe earthquake nucleation. If this transition is rather well understood for homogeneous faults, how the friction properties of multiscale asperities may influence the overall stability of seismogenic faults remains largely unclear. Combining classical nucleation theory and concepts borrowed from condensed matter physics, we propose a comprehensive analytical framework that predicts the influence of heterogeneities of weakening rate on the nucleation length Lc for linearly slip-dependent friction laws. Model predictions are compared to nucleation lengths measured from 2D dynamic simulations of earthquake nucleation along heterogeneous faults. Our results show that the interplay between frictional properties and the asperity size gives birth to three instability regimes (local, extremal, and homogenized), each related to different nucleation scenarios, and that the influence of heterogeneities at a scale far lower than the nucleation length can be averaged.

| S-EPMC9286591 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data