A Monte Carlo simulation approach for estimating the health and economic impact of interventions provided at a student-run clinic.
Ontology highlight
ABSTRACT: Background
Student Run Clinics (SRCs) are a common aspect of medical education, present at more than half of US medical schools, and noted for providing care to communities that might otherwise lack access, including the uninsured and underinsured. To date, few studies have rigorously quantified the health and economic benefits of SRCs, and the present study remedies that.Methods and findings
We used Monte Carlo simulations to estimate the health impact of common preventive health interventions applied to individuals in quality-adjusted life-years (QALYs). We then used those measurements to estimate the health and economic impact of United Community Clinic (UCC), a student-run clinic in Philadelphia, PA. We found that with an annual operating budget of $50,000, UCC saves 6.5 QALYs, corresponding to over $850,000 saved.Conclusions
Using Monte Carlo simulation methods, the health and economic impact of SRCs can be reasonably estimated to demonstrate the utility of SRCs and justify their growing importance in the healthcare delivery landscape of the US.
SUBMITTER: Arenas DJ
PROVIDER: S-EPMC5746244 | biostudies-literature |
REPOSITORIES: biostudies-literature
Similar Datasets
Project description:Conventional mammography can suffer from poor contrast between healthy and cancerous tissues due to the small difference in attenuation properties. Coherent scatter slot scan imaging is an imaging technique which provides additional information and is compatible with conventional mammography. A Monte Carlo simulation of coherent scatter slot scan imaging was performed to assess its performance and provide system optimization. Coherent scatter could be exploited using a system similar to conventional slot scan mammography system with antiscatter grids tilted at the characteristic angle of cancerous tissues. System optimization was performed across several parameters, including source voltage, tilt angle, grid distances, grid ratio, and shielding geometry. The simulated carcinomas were detectable for tumors as small as 5 mm in diameter, so coherent scatter analysis using a wide-slot setup could be promising as an enhancement for screening mammography. Employing coherent scatter information simultaneously with conventional mammography could yield a conventional high spatial resolution image with additional coherent scatter information.
| S-EPMC4999523 | biostudies-other
Project description:Evaluating the marginal likelihood in Bayesian analysis is essential for model selection. Estimators based on a single Markov chain Monte Carlo sample from the posterior distribution include the harmonic mean estimator and the inflated density ratio estimator. We propose a new class of Monte Carlo estimators based on this single Markov chain Monte Carlo sample. This class can be thought of as a generalization of the harmonic mean and inflated density ratio estimators using a partition weighted kernel (likelihood times prior). We show that our estimator is consistent and has better theoretical properties than the harmonic mean and inflated density ratio estimators. In addition, we provide guidelines on choosing optimal weights. Simulation studies were conducted to examine the empirical performance of the proposed estimator. We further demonstrate the desirable features of the proposed estimator with two real data sets: one is from a prostate cancer study using an ordinal probit regression model with latent variables; the other is for the power prior construction from two Eastern Cooperative Oncology Group phase III clinical trials using the cure rate survival model with similar objectives.
| S-EPMC5967857 | biostudies-literature
Project description:Nearest Neighbour (NN) propensity score (PS) matching methods are commonly used in pharmacoepidemiology to estimate treatment response using observational data. Unfortunately, there is limited evidence on the optimal approach for accurately estimating binary treatment response and, more so, to estimate its variance. Bootstrapping, although commonly used to accurately estimate variance, is rarely used together with PS matching. In this Monte Carlo simulation-based study, we examined the performance of bootstrapping used in conjunction with PS matching, as opposed to different NN matching techniques, on a simulated dataset exhibiting varying levels of real world complexity. Thus, an experimental design was set up that independently varied the proportion of patients treated, the proportion of outcomes censored and the amount of PS matches used. Simulation results were externally validated on a real observational dataset obtained from the Belgian Cancer Registry. We found all investigated PS methods to be stable and concordant, with k-NN matching to be optimally dealing with the censoring problem, typically present in chronic cancer-related datasets, whilst being the least computationally expensive. In contrast, bootstrapping used in conjunction with PS matching, being the most computationally expensive, only showed superior results in small patient populations with long-term largely unobserved treatment effects.
| S-EPMC6976708 | biostudies-literature
Project description:This data article is related to the research article, "M.J. McNulty, K. Kelada, D. Paul, S. Nandi, and K.A. McDonald, Introducing uncertainty quantification to techno-economic models of manufacturing field-grown plant-made products, Food Bioprod. Process. 128 (2021) 153-165." The raw and analyzed data presented are related to generation, analysis, and optimization of ultra-large-scale field-grown plant-based manufacturing of high-value recombinant protein under uncertainty. The data have been acquired using deterministic techno-economic process model simulation in SuperPro Designer integrated with stochastic Monte Carlo-based simulation in Microsoft Excel using the Crystal Ball plug-in. The purpose of the article is to make techno-economic and associated uncertainty data available to be leveraged and adapted for other research purposes.
| S-EPMC8405912 | biostudies-literature
Project description:Traditional multiple-group confirmatory factor analysis (multiple-group CFA) is usually criticized for having too restrictive model assumption, namely the scalar measurement invariance. The new multiple-group analysis methodology, alignment, has become an effective alternative. The alignment evaluates measurement invariance and more importantly, permits factor mean comparisons without requiring scalar invariance which is usually required in traditional multiple-group CFA. Some simulation studies and empirical studies have investigated the applicability of alignment under different conditions, but some areas remain unexplored. Based on the simulation studies of Asparouhov and Muthén and of Flake and McCoach, this current simulation study is broken into two sections. The first study investigates the minimal group sizes required for alignment in three-factor models. The second study compares the performance of multiple-group CFA, multiple-group exploratory structural equation model (multiple-group ESEM), and alignment by including different proportions and magnitudes of cross-loadings in the models. Study 1 shows that when the model has no noninvariant parameters, the alignment requires relatively lower group sizes. Explicitly, the minimal group size required for alignment was 250 when the amount of groups was three, the minimal group size was 150 when the amount of groups was nine, and 200 when the amount of groups was 15. When there are noninvariant parameters in the model and the amount of groups is low, a group size of 350 is a safe rule of thumb. When there are noninvariant parameters in the model and the amount of groups is high, a group size of 250 is required for trustworthy results. The magnitude of noninvariance and the noninvariance rate do not affect the minimal group size required for alignment. Study 2 shows that multiple-group CFA provides accurate factor mean estimates when each factor had 20% factor loading (1 factor loading) with small-sized cross-loading. Multiple-group ESEM provides accurate factor mean estimates when the magnitude of cross-loading is small or when each factor had 20% factor loading (1 factor loading) with medium-sized cross-loading. Alignment provides accurate factor mean estimates when there are only small-sized cross-loadings in the model. The parameter estimates, coverage rates and ratios of average standard error to standard deviation for each methodology are not influenced by the amount of groups. Recommendations are concluded for using multiple-group CFA, multiple-group ESEM, traditional alignment and aligned ESEM (AESEM) based on the results. Multiple-group CFA is more suitable for use when scalar invariance is established. Multiple-group ESEM works best when there are small-sized or only a few medium-sized cross-loadings in the model. Traditional alignment allows for small-sized cross-loadings and a few noninvariant parameters in the model. AESEM integrates the advantages of alignment and ESEM, can provide accurate estimates when noninvariant parameters and cross-loadings both exist in the model. Compared to multiple-group CFA, multiple-group ESEM, the alignment methodology performs well in more situations.
| S-EPMC9263979 | biostudies-literature
Project description:A computational method is developed to carry out explicit solvent simulations of complex molecular systems under conditions of constant pH. In constant-pH simulations, preidentified ionizable sites are allowed to spontaneously protonate and deprotonate as a function of time in response to the environment and the imposed pH. The method, based on a hybrid scheme originally proposed by H. A. Stern (J. Chem. Phys. 2007, 126, 164112), consists of carrying out short nonequilibrium molecular dynamics (neMD) switching trajectories to generate physically plausible configurations with changed protonation states that are subsequently accepted or rejected according to a Metropolis Monte Carlo (MC) criterion. To ensure microscopic detailed balance arising from such nonequilibrium switches, the atomic momenta are altered according to the symmetric two-ends momentum reversal prescription. To achieve higher efficiency, the original neMD-MC scheme is separated into two steps, reducing the need for generating a large number of unproductive and costly nonequilibrium trajectories. In the first step, the protonation state of a site is randomly attributed via a Metropolis MC process on the basis of an intrinsic pKa; an attempted nonequilibrium switch is generated only if this change in protonation state is accepted. This hybrid two-step inherent pKa neMD-MC simulation method is tested with single amino acids in solution (Asp, Glu, and His) and then applied to turkey ovomucoid third domain and hen egg-white lysozyme. Because of the simple linear increase in the computational cost relative to the number of titratable sites, the present method is naturally able to treat extremely large systems.
| S-EPMC4535364 | biostudies-literature
Project description:BACKGROUND: In the biological sciences the TCID50 (median tissue culture infective dose) assay is often used to determine the strength of a virus. METHODS: When the so-called Spearman-Kaerber calculation is used, the ratio between the pfu (the number of plaque forming units, the effective number of virus particles) and the TCID50, theoretically approaches a simple function of Eulers constant. Further, the standard deviation of the logarithm of the TCID50 approaches a simple function of the dilution factor and the number of wells used for determining the ratios in the assay. However, these theoretical calculations assume that the dilutions of the assay are independent, and in practice this is not completely correct. The assay was simulated using Monte Carlo techniques. RESULTS: Our simulation studies show that the theoretical results actually hold true for practical implementations of the assay. Furthermore, the simulation studies show that the distribution of the (the log of) TCID50, although discrete in nature, has a close relationship to the normal distribution. CONCLUSION: The pfu is proportional to the TCID50 titre with a factor of about 0.56 when using the Spearman-Kaerber calculation method. The normal distribution can be used for statistical inferences and ANOVA on the (the log of) TCID50 values is meaningful with group sizes of 5 and above.
| S-EPMC3331834 | biostudies-other
Project description:Performance optimization of indirect x-ray detectors requires proper characterization of both ionizing (gamma) and optical photon transport in a heterogeneous medium. As the tool of choice for modeling detector physics, Monte Carlo methods have failed to gain traction as a design utility, due mostly to excessive simulation times and a lack of convenient simulation packages. The most important figure-of-merit in assessing detector performance is the detective quantum efficiency (DQE), for which most of the computational burden has traditionally been associated with the determination of the noise power spectrum (NPS) from an ensemble of flood images, each conventionally having 10(7) - 10(9) detected gamma photons. In this work, the authors show that the idealized conditions inherent in a numerical simulation allow for a dramatic reduction in the number of gamma and optical photons required to accurately predict the NPS.The authors derived an expression for the mean squared error (MSE) of a simulated NPS when computed using the International Electrotechnical Commission-recommended technique based on taking the 2D Fourier transform of flood images. It is shown that the MSE is inversely proportional to the number of flood images, and is independent of the input fluence provided that the input fluence is above a minimal value that avoids biasing the estimate. The authors then propose to further lower the input fluence so that each event creates a point-spread function rather than a flood field. The authors use this finding as the foundation for a novel algorithm in which the characteristic MTF(f), NPS(f), and DQE(f) curves are simultaneously generated from the results of a single run. The authors also investigate lowering the number of optical photons used in a scintillator simulation to further increase efficiency. Simulation results are compared with measurements performed on a Varian AS1000 portal imager, and with a previously published simulation performed using clinical fluence levels.On the order of only 10-100 gamma photons per flood image were required to be detected to avoid biasing the NPS estimate. This allowed for a factor of 10(7) reduction in fluence compared to clinical levels with no loss of accuracy. An optimal signal-to-noise ratio (SNR) was achieved by increasing the number of flood images from a typical value of 100 up to 500, thereby illustrating the importance of flood image quantity over the number of gammas per flood. For the point-spread ensemble technique, an additional 2× reduction in the number of incident gammas was realized. As a result, when modeling gamma transport in a thick pixelated array, the simulation time was reduced from 2.5 × 10(6) CPU min if using clinical fluence levels to 3.1 CPU min if using optimized fluence levels while also producing a higher SNR. The AS1000 DQE(f) simulation entailing both optical and radiative transport matched experimental results to within 11%, and required 14.5 min to complete on a single CPU.The authors demonstrate the feasibility of accurately modeling x-ray detector DQE(f) with completion times on the order of several minutes using a single CPU. Convenience of simulation can be achieved using GEANT4 which offers both gamma and optical photon transport capabilities.
| S-EPMC3978362 | biostudies-other
Project description:Two new statistical models based on Monte Carlo Simulation (MCS) have been developed to score peptide matches in shotgun proteomic data and incorporated in a database search program, MassMatrix (www.massmatrix.net). The first model evaluates peptide matches based on the total abundance of matched peaks in the experimental spectra. The second model evaluates amino acid residue tags within MS/MS spectra. The two models provide complementary scores for peptide matches that result in higher confidence in peptide identification when significant scores are returned from both models. The MCS-based models use a variance reduction technique that improves estimation precision. Due to the high computational expense of MCS-based models, peptide matches were prefiltered by other statistical models before further evaluation by the MCS-based models. Receiver operating characteristic analysis of the data sets confirmed that MCS-based models improved the overall performance of the MassMatrix search software, especially for low-mass accuracy data sets.
| S-EPMC2749500 | biostudies-literature
Project description:Molecular simulations based on classical force fields are computationally efficient but lack accuracy due to the empirical formulation of non-bonded interactions. Quantum mechanical (QM) methods, albeit accurate, have inhibitory computational costs for large molecules and clusters. Hence, to overcome the bottleneck, machine learning (ML)-based methods have been employed in the recent years. We had earlier reported a combined scheme of many-body expansion (MBE) and ML to predict the interaction energies of rigid water clusters. In this work, we proceed toward building a flexible water model using the ML-MBE scheme. This ML-MBE scheme has an error of <1% for interaction energy prediction in comparison to the parent QM method for flexible water decamers. Machine learning-based Monte Carlo simulations (MLMC) are performed with this water model, and the structural properties of these configurations are compared with those obtained from ab initio molecular dynamics (AIMD) and the TIP3P classical force field. The radial distribution functions, tetrahedral order parameters, and number of hydrogen bonds in AIMD and MLMC have a similar qualitative and quantitative trend, whereas the classical force fields show a significant deviation.
| S-EPMC7143414 | biostudies-literature