Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

The Room-Temperature Chemiresistive Properties of Potassium Titanate Whiskers versus Organic Vapors.

ABSTRACT: The development of portable gas-sensing units implies a special care of their power efficiency, which is often approached by operation at room temperature. This issue primarily appeals to a choice of suitable materials whose functional properties are sensitive toward gas vapors at these conditions. While the gas sensitivity is nowadays advanced by employing the materials at nano-dimensional domain, the room temperature operation might be targeted via the application of layered solid-state electrolytes, like titanates. Here, we report gas-sensitive properties of potassium titanate whiskers, which are placed over a multielectrode chip by drop casting from suspension to yield a matrix mono-layer of varied density. The material synthesis conditions are straightforward both to get stable single-crystalline quasi-one-dimensional whiskers with a great extent of potassium replacement and to favor the increase of specific surface area of the structures. The whisker layer is found to be sensitive towards volatile organic compounds (ethanol, isopropanol, acetone) in the mixture with air at room temperature. The vapor identification is obtained via processing the vector signal generated by sensor array of the multielectrode chip with the help of pattern recognition algorithms.

SUBMITTER: Varezhnikov AS

PROVIDER: S-EPMC5746944 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Organic-Inorganic Ternary Nanohybrids of Single-Walled Carbon Nanohorns for Room Temperature Chemiresistive Ethanol Detection.

Project description:Organic-inorganic ternary nanohybrids consisting of oxidized-single walled carbon nanohorns-SnO2-polyvinylpyrrolidone (ox-SWCNH/SnO2/PVP) with stoichiometry 1/1/1 and 2/1/1 and ox-SWCNH/ZnO/PVP = 5/2/1 and 5/3/2 (all mass ratios) were synthesized and characterized as sensing films of chemiresistive test structures for ethanol vapor detection in dry air, in the range from 0 up to 50 mg/L. All the sensing films had an ox-SWCNH concentration in the range of 33.3-62.5 wt%. A comparison between the transfer functions and the response and recovery times of these sensing devices has shown that the structures with ox-SWCNH/SnO2/PVP = 1/1/1 have the highest relative sensitivities of 0.0022 (mg/L)-1, while the devices with ox-SWCNH/SnO2/PVP = 2/1/1 have the lowest response time (15 s) and recovery time (50 s) for a room temperature operation, proving the key role of carbonic material in shaping the static and dynamic performance of the sensor. These response and recovery times are lower than those of "heated" commercial sensors. The sensing mechanism is explained in terms of the overall response of a p-type semiconductor, where ox-SWCNH percolated between electrodes of the sensor, shunting the heterojunctions made between n-type SnO2 or ZnO and p-type ox-SWCNH. The hard-soft acid-base (HSAB) principle supports this mechanism. The low power consumption of these devices, below 2 mW, and the sensing performances at room temperature may open new avenues towards ethanol sensors for passive samplers of environment monitoring, alcohol test portable instruments and wireless network sensors for Internet of Things applications.

| S-EPMC7766401 | biostudies-literature

Air Stable Nickel-Decorated Black Phosphorus and Its Room-Temperature Chemiresistive Gas Sensor Capabilities.

Project description:In the rapidly emerging field of layered two-dimensional functional materials, black phosphorus, the P-counterpart of graphene, is a potential candidate for various applications, e.g., nanoscale optoelectronics, rechargeable ion batteries, electrocatalysts, thermoelectrics, solar cells, and sensors. Black phosphorus has shown superior chemical sensing performance; in particular, it is selective for the detection of NO2, an environmental toxic gas, for which black phosphorus has highlighted high sensitivity at a ppb level. In this work, by applying a multiscale characterization approach, we demonstrated a stability and functionality improvement of nickel-decorated black phosphorus films for gas sensing prepared by a simple, reproducible, and affordable deposition technique. Furthermore, we studied the electrical behavior of these films once implemented as functional layers in gas sensors by exposing them to different gaseous compounds and under different relative humidity conditions. Finally, the influence on sensing performance of nickel nanoparticle dimensions and concentration correlated to the decoration technique and film thickness was investigated.

| S-EPMC8461602 | biostudies-literature

Ferroelectric perovskite-type films with robust in-plane polarization toward efficient room-temperature chemiresistive sensing.

Project description:Ferroelectric materials have become key components for versatile device applications, and their thin films are highly desirable for integrating the miniaturized devices. Despite substantial endeavors, it is still challenging to achieve effective chemiresistive sensing in the ferroelectric films. Here, for the first time, we have exploited ferroelectric thin films of 2D hybrid perovskite BA2EA2Pb3I10 (1), to fabricate the high-performance chemiresistor gas sensors. The spin-coated films of 1 exhibit high orientation and good crystallinity, thus preserving robust in-plane spontaneous polarization (P s ∼2.0 μC/cm2) and low electric coercivity. Notably, such ferroelectric film-based sensors after electric poling enable the dramatic room-temperature sensing responses to NO2 gas, including high sensitivity (0.05 ppm-1), extremely low detection limit (1 ppm) and fast responding rate (∼6 s). Besides, the chemiresistive responses are remarkably enhanced by threefold (up to 320%) through electric poling. It is proposed that this behavior closely involves with strong in-plane ferroelectric polarization of 1 that generates a built-in electric field inhibiting the recombination of charge carriers. As far as we know, this ferroelectric-based film chemiresisor is one of the best room-temperature sensors for NO2 gas among all the existing candidate materials. These findings highlight great potential of ferroelectrics toward effective chemiresistive performances, and also establish a bright direction to explore their future device applications.

| S-EPMC11197688 | biostudies-literature

Exclusive and ultrasensitive detection of formaldehyde at room temperature using a flexible and monolithic chemiresistive sensor.

Project description:Formaldehyde, a probable carcinogen, is a ubiquitous indoor pollutant, but its highly selective detection has been a long-standing challenge. Herein, a chemiresistive sensor that can detect ppb-level formaldehyde in an exclusive manner at room temperature is designed. The TiO2 sensor exhibits under UV illumination highly selective detection of formaldehyde and ethanol with negligible cross-responses to other indoor pollutants. The coating of a mixed matrix membrane (MMM) composed of zeolitic imidazole framework (ZIF-7) nanoparticles and polymers on TiO2 sensing films removed ethanol interference completely by molecular sieving, enabling an ultrahigh selectivity (response ratio > 50) and response (resistance ratio > 1,100) to 5 ppm formaldehyde at room temperature. Furthermore, a monolithic and flexible sensor is fabricated successfully using a TiO2 film sandwiched between a flexible polyethylene terephthalate substrate and MMM overlayer. Our work provides a strategy to achieve exclusive selectivity and high response to formaldehyde, demonstrating the promising potential of flexible gas sensors for indoor air monitoring.

| S-EPMC8368006 | biostudies-literature

Crystalline Structure, Defect Chemistry and Room Temperature Colossal Permittivity of Nd-doped Barium Titanate.

Project description:Dielectric materials with high permittivity are strongly demanded for various technological applications. While polarization inherently exists in ferroelectric barium titanate (BaTiO3), its high permittivity can only be achieved by chemical and/or structural modification. Here, we report the room-temperature colossal permittivity (~760,000) obtained in xNd: BaTiO3 (x?=?0.5?mol%) ceramics derived from the counterpart nanoparticles followed by conventional pressureless sintering process. Through the systematic analysis of chemical composition, crystalline structure and defect chemistry, the substitution mechanism involving the occupation of Nd3+ in Ba2+ -site associated with the generation of Ba vacancies and oxygen vacancies for charge compensation has been firstly demonstrated. The present study serves as a precedent and fundamental step toward further improvement of the permittivity of BaTiO3-based ceramics.

| S-EPMC5304219 | biostudies-literature

Warm Water Versus Room Temperature Water Immersion Colonoscopy

Project description:Water immersion insertion has been documented to decrease procedure-related discomfort during colonoscopy. There was used warm water infusion for colonoscope insertion in most of the water immersion colonoscopy trials. The investigators have been using room temperature water (20-24°C) for water immersion and the investigators did not notice any drawback of it. In our opinion, it is simpler and cheaper option for water immersion colonoscopy and proof of its efficacy and safety could support the use of water immersion technique in routine practice. The primary endpoint is cecal intubation time and the investigators suppose that the use of warm water infusion does not shorten it significantly. Patient comfort during colonoscope insertion, water consumption, length of the scope while reaching the cecum, need for external compression, need for positioning of the patient and endoscopist´s difficulty with colonoscopy will be also assessed.

| 2124104 | ecrin-mdr-crc

Room temperature triplet state spectroscopy of organic semiconductors.

Project description:Organic light-emitting devices and solar cells are devices that create, manipulate, and convert excited states in organic semiconductors. It is crucial to characterize these excited states, or excitons, to optimize device performance in applications like displays and solar energy harvesting. This is complicated if the excited state is a triplet because the electronic transition is 'dark' with a vanishing oscillator strength. As a consequence, triplet state spectroscopy must usually be performed at cryogenic temperatures to reduce competition from non-radiative rates. Here, we control non-radiative rates by engineering a solid-state host matrix containing the target molecule, allowing the observation of phosphorescence at room temperature and alleviating constraints of cryogenic experiments. We test these techniques on a wide range of materials with functionalities spanning multi-exciton generation (singlet exciton fission), organic light emitting device host materials, and thermally activated delayed fluorescence type emitters. Control of non-radiative modes in the matrix surrounding a target molecule may also have broader applications in light-emitting and photovoltaic devices.

| S-EPMC3896913 | biostudies-literature

Purely Organic Microparticles Showing Ultralong Room Temperature Phosphorescence.

Project description:Currently, organic phosphorescent particles are heavily used in sensing and imaging. Up to now, most of these particles contain poisonous and/or expensive metal complexes. Environmentally friendly systems are therefore highly desired. A purely amorphous system consisting of poly(methyl methacrylate) particles with incorporated N,N,N',N'-tetrakis(4-carboxyphenyl)benzidine emitter molecules is presented in this work. Single particles with sizes between 400 and 840 nm show-depending on the environment-bright fluorescence and phosphorescence. The latter is observed when oxygen is not in the proximity of the emitting dye molecules. These particles can scavenge singlet oxygen, which is produced during the photoexcitation process, by incorporating it into the polymer matrix. This renders their use to be unharmful for the surrounding matter with possible application in marking schemes for living bodies.

| S-EPMC8158833 | biostudies-literature

Room temperature organic exciton-polariton condensate in a lattice.

Project description:Interacting Bosons in artificial lattices have emerged as a modern platform to explore collective manybody phenomena and exotic phases of matter as well as to enable advanced on-chip simulators. On chip, exciton-polaritons emerged as a promising system to implement and study bosonic non-linear systems in lattices, demanding cryogenic temperatures. We discuss an experiment conducted on a polaritonic lattice at ambient conditions: We utilize fluorescent proteins providing ultra-stable Frenkel excitons. Their soft nature allows for mechanically shaping them in the photonic lattice. We demonstrate controlled loading of the coherent condensate in distinct orbital lattice modes of different symmetries. Finally, we explore the self-localization of the condensate in a gap-state, driven by the interplay of effective interaction and negative effective mass in our lattice. We believe that this work establishes organic polaritons as a serious contender to the well-established GaAs platform for a wide range of applications relying on coherent Bosons in lattices.

| S-EPMC7280250 | biostudies-literature

Mechano-induced persistent room-temperature phosphorescence from purely organic molecules.

Project description:The persistent room-temperature phosphorescence (RTP) of purely organic materials in the solid state has recently attracted much research interest and found promising, rapid and visual applications by the naked eye, after the removal of the excitation source. However, almost all reported organic persistent RTP processes are induced by using a UV-light irradiation source. In this report, persistent RTP with an emission lifetime as long as 0.15 s which can be induced not only by photoirradiation but also by mechanical action is presented, which merges mechano-induced luminescence and persistent RTP together. It is found that such persistent RTP is produced through intermolecular electronic coupling (IEC) of units with different excited state configurations. Interestingly, there are two different crystals with and without mechano-induced persistent RTP which can be grown from this organic material, as such a new type of mechano-luminescence (ML) is strongly dependent on their intermolecular interactions. Furthermore, the intensity of such mechano-induced persistent RTP can be increased by lowing the temperature as well, similar to that of photo-induced persistent RTP. Notably, these two crystals exhibit a ML enhancement and ML "turn on", respectively, with decreasing temperature. Therefore, such mechano-induced persistent RTP provides an example of new types of organic luminescent materials, which is a missing jigsaw piece of organic luminescence and important for both fundamental research and practical applications of both persistent RTP and ML of organic materials.

| S-EPMC5939606 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data