Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Gas-sensing behaviour of ZnO/diamond nanostructures.

ABSTRACT: Microstructured single- and double-layered sensor devices based on p-type hydrogen-terminated nanocrystalline diamond (NCD) films and/or n-type ZnO nanorods (NRs) have been obtained via a facile microwave-plasma-enhanced chemical vapour deposition process or a hydrothermal growth procedure. The morphology and crystal structure of the synthesized materials was analysed with scanning electron microscopy, X-ray diffraction measurements and Raman spectroscopy. The gas sensing properties of the sensors based on i) NCD films, ii) ZnO nanorods, and iii) hybrid ZnO NRs/NCD structures were evaluated with respect to oxidizing (i.e., NO2, CO2) and reducing (i.e., NH3) gases at 150 °C. The hybrid ZnO NRs/NCD sensor showed a remarkably enhanced NO2 response compared to the ZnO NRs sensor. Further, inspired by this special hybrid structure, the simulation of interaction between the gas molecules (NO2 and CO2) and hybrid ZnO NRs/NCD sensor was studied using DFT calculations.

SUBMITTER: Davydova M

PROVIDER: S-EPMC5769078 | biostudies-literature | 2018

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Gas-sensing behaviour of ZnO/diamond nanostructures.

Davydova Marina M Laposa Alexandr A Smarhak Jiri J Kromka Alexander A Neykova Neda N Nahlik Josef J Kroutil Jiri J Drahokoupil Jan J Voves Jan J

Beilstein journal of nanotechnology 20180103

Microstructured single- and double-layered sensor devices based on p-type hydrogen-terminated nanocrystalline diamond (NCD) films and/or n-type ZnO nanorods (NRs) have been obtained via a facile microwave-plasma-enhanced chemical vapour deposition process or a hydrothermal growth procedure. The morphology and crystal structure of the synthesized materials was analysed with scanning electron microscopy, X-ray diffraction measurements and Raman spectroscopy. The gas sensing properties of the senso ...[more]

PMID: 29379697

Similar Datasets

CuO-Decorated ZnO Hierarchical Nanostructures as Efficient and Established Sensing Materials for H2S Gas Sensors.

Project description:Highly sensitive hydrogen sulfide (H2S) gas sensors were developed from CuO-decorated ZnO semiconducting hierarchical nanostructures. The ZnO hierarchical nanostructure was fabricated by an electrospinning method following hydrothermal and heat treatment. CuO decoration of ZnO hierarchical structures was carried out by a wet method. The H2S gas-sensing properties were examined at different working temperatures using various quantities of CuO as the variable. CuO decoration of the ZnO hierarchical structure was observed to promote sensitivity for H2S gas higher than 30 times at low working temperature (200 °C) compared with that in the nondecorated hierarchical structure. The sensing mechanism of the hybrid sensor structure is also discussed. The morphology and characteristics of the samples were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-vis absorption, photoluminescence (PL), and electrical measurements.

| S-EPMC4882619 | biostudies-literature

Gas sensing properties of nanocrystalline diamond at room temperature.

Project description:This study describes an integrated NH3 sensor based on a hydrogenated nanocrystalline diamond (NCD)-sensitive layer coated on an interdigitated electrode structure. The gas sensing properties of the sensor structure were examined using a reducing gas (NH3) at room temperature and were found to be dependent on the electrode arrangement. A pronounced response of the sensor, which was comprised of dense electrode arrays (of 50 µm separation distance), was observed. The sensor functionality was explained by the surface transfer doping effect. Moreover, the three-dimensional model of the current density distribution of the hydrogenated NCD describes the transient flow of electrons between interdigitated electrodes and the hydrogenated NCD surface, that is, the formation of a closed current loop.

| S-EPMC4273209 | biostudies-literature

Hydrogen gas sensing using aluminum doped ZnO metasurfaces.

Project description:Hydrogen (H2) sensing is crucial in a wide variety of areas, such as industrial, environmental, energy and biomedical applications. However, engineering a practical, reliable, fast, sensitive and cost-effective hydrogen sensor is a persistent challenge. Here we demonstrate hydrogen sensing using aluminum-doped zinc oxide (AZO) metasurfaces based on optical read-out. The proposed sensing system consists of highly ordered AZO nanotubes (hollow pillars) standing on a SiO2 layer deposited on a Si wafer. Upon exposure to hydrogen gas, the AZO nanotube system shows a wavelength shift in the minimum reflectance by ∼13 nm within 10 minutes for a hydrogen concentration of 4%. These AZO nanotubes can also sense the presence of a low concentration (0.7%) of hydrogen gas within 10 minutes. Their rapid response time even for a low concentration, the possibility of large sensing area fabrication with good precision, and high sensitivity at room temperature make these highly ordered nanotube structures a promising miniaturized H2 gas sensor.

| S-EPMC9417916 | biostudies-literature

Synthesis of ZnO nanostructures for low temperature CO and UV sensing.

Project description:In this paper, synthesis and results of the low temperature sensing of carbon monoxide (CO) gas and room temperature UV sensors using one dimensional (1-D) ZnO nanostructures are presented. Comb-like structures, belts and rods, and needle-shaped nanobelts were synthesized by varying synthesis temperature using a vapor transport method. Needle-like ZnO nanobelts are unique as, according to our knowledge, there is no evidence of such morphology in previous literature. The structural, morphological and optical characterization was carried out using X-ray diffraction, scanning electron microscopy and diffused reflectance spectroscopy techniques. It was observed that the sensing response of comb-like structures for UV light was greater as compared to the other grown structures. Comb-like structure based gas sensors successfully detect CO at 75 °C while other structures did not show any response.

| S-EPMC3545595 | biostudies-literature

Improving sensing of formaldehyde using ZnO nanostructures with surface-adsorbed oxygen.

Project description:Detection of pollutant gases, such as formaldehyde (HCHO), in our homes and surrounding environment is of high importance for our health and safety. The effect of surface defects and specifically pre-adsorbed oxygen on the gas sensing reaction of HCHO with ZnO nanostructures is largely unknown. Using density functional theory, nonequilibrium Green's function method and ab initio molecular dynamics (AIMD) simulations, we show that the presence of surface oxygen has two key roles in the sensitivity of ZnO towards HCHO: (1) it leads to the presence of charge trap states, which vanish upon the adsorption of HCHO, and (2) it facilitates the dissociative chemisorption of HCHO on the surface. Our ground state and AIMD calculations show that multiple reaction products are produced, which eventually lead to cleaning the surface from the adsorbed species, and hence enhancing the recyclability of the surface. We not only confirm the reaction proposed by experiment, but show that the presence of surface oxygen facilitates other surface reactions as well. Our work provides insights into the gas-surface reaction mechanism of ZnO-nanostructure based gas sensors, not provided before by experiment.

| S-EPMC9417844 | biostudies-literature

Synthesis of ZnO Hierarchical Structures and Their Gas Sensing Properties.

Project description:Firecracker-like ZnO hierarchical structures (ZnO HS1) were synthesized by combining electrospinning with hydrothermal methods. Flower-like ZnO hierarchical structures (ZnO HS2) were prepared by a hydrothermal method using ultrasound-treated ZnO nanofibers (ZnO NFs) as raw material which has rarely been reported in previous papers. Scanning electron microscope (SEM) and transmission electron microscope's (TEM) images clearly indicated the existence of nanoparticles on the ZnO HS2 material. Both gas sensors exhibited high selectivity toward H2S gas over various other gases at 180 °C. The ZnO HS2 gas sensor exhibited higher H2S sensitivity response (50 ppm H2S, 42.298) at 180 °C than ZnO NFs (50 ppm H2S, 9.223) and ZnO HS1 (50 ppm H2S, 17.506) gas sensors. Besides, the ZnO HS2 sensor showed a shorter response time (14 s) compared with the ZnO NFs (25 s) and ZnO HS1 (19 s) gas sensors. The formation diagram of ZnO hierarchical structures and the gas sensing mechanism were evaluated. Apart from the synergistic effect of nanoparticles and nanoflowers, more point-point contacts between flower-like ZnO nanorods were advantageous for the excellent H2S sensing properties of ZnO HS2 material.

| S-EPMC6781051 | biostudies-literature

Graphene-Modified ZnO Nanostructures for Low-Temperature NO<sub>2</sub> Sensing.

Project description:This paper develops a novel ultrasonic spray-assisted solvothermal (USS) method to synthesize wrapped ZnO/reduced graphene oxide (rGO) nanocomposites with a Schottky junction for gas-sensing applications. The as-obtained ZnO/rGO-x samples with different graphene oxide (GO) contents (x = 0-1.5 wt %) are characterized by various techniques, and their gas-sensing properties for NO2 and other VOC gases are also evaluated. The results show that the USS-derived ZnO/rGO samples exhibit high NO2-sensing property at low operating temperatures (e.g., 70-130 °C) because of their high specific surface area and porous structures when compared with the ZnO/rGO sample obtained by the traditional precipitation method. The content of rGO shows an obvious effect on their NO2-sensing properties, and the ZnO/rGO-0.5 sample has a high response of 62 operating at 130 °C, three times that of pure ZnO. The detection limit of the ZnO/rGO-0.5 sensor to NO2 is as low as 10 ppb under the present test condition. In addition, the ZnO/rGO-0.5 sensor shows a highly selective response to NO2 gas when compared with organic vapors and other inflammable or toxic gases. The theoretical and experimental analyses indicate that the enhancement in NO2-sensing performance of the ZnO/rGO sensor is attributed to the formation of wrapped ZnO/rGO Schottky junctions.

| S-EPMC6647949 | biostudies-literature

Diamond-Graphene Composite Nanostructures.

Project description:The search for new nanostructural topologies composed of elemental carbon is driven by technological opportunities as well as the need to understand the structure and evolution of carbon materials formed by planetary shock impact events and in laboratory syntheses. We describe two new families of diamond-graphene (diaphite) phases constructed from layered and bonded sp3 and sp2 nanostructural units and provide a framework for classifying the members of this new class of materials. The nanocomposite structures are identified within both natural impact diamonds and laboratory-shocked samples and possess diffraction features that have previously been assigned to lonsdaleite and postgraphite phases. The diaphite nanocomposites represent a new class of high-performance carbon materials that are predicted to combine the superhard qualities of diamond with high fracture toughness and ductility enabled by the graphitic units and the atomically defined interfaces between the sp3- and sp2-bonded nanodomains.

| S-EPMC7227005 | biostudies-literature

Electrospun one-dimensional nanostructures: a new horizon for gas sensing materials.

Project description:Electrospun one-dimensional (1D) nanostructures are rapidly emerging as key enabling components in gas sensing due to their unique electrical, optical, magnetic, thermal, mechanical and chemical properties. 1D nanostructures have found applications in numerous areas, including healthcare, energy storage, biotechnology, environmental monitoring, and defence/security. Their enhanced specific surface area, superior mechanical properties, nanoporosity and improved surface characteristics (in particular, uniformity and stability) have made them important active materials for gas sensing applications. Such highly sensitive and selective elements can be embedded in sensor nodes for internet-of-things applications or in mobile systems for continuous monitoring of air pollutants and greenhouse gases as well as for monitoring the well-being and health in everyday life. Herein, we review recent developments of gas sensors based on electrospun 1D nanostructures in different sensing platforms, including optical, conductometric and acoustic resonators. After explaining the principle of electrospinning, we classify sensors based on the type of materials used as an active sensing layer, including polymers, metal oxide semiconductors, graphene, and their composites or their functionalized forms. The material properties of these electrospun fibers and their sensing performance toward different analytes are explained in detail and correlated to the benefits and limitations for every approach.

| S-EPMC6122236 | biostudies-literature

Ag-Modified In?O?/ZnO Nanobundles with High Formaldehyde Gas-Sensing Performance.

Project description:Ag-modified In2O3/ZnO bundles with micro/nano porous structures have been designed and synthesized with by hydrothermal method continuing with dehydration process. Each bundle consists of nanoparticles, where nanogaps of 10-30 nm are present between the nanoparticles, leading to a porous structure. This porous structure brings high surface area and fast gas diffusion, enhancing the gas sensitivity. Consequently, the HCHO gas-sensing performance of the Ag-modified In2O3/ZnO bundles have been tested, with the formaldehyde-detection limit of 100 ppb (parts per billion) and the response and recover times as short as 6 s and 3 s, respectively, at 300 °C and the detection limit of 100 ppb, response time of 12 s and recover times of 6 s at 100 °C. The HCHO sensing detect limitation matches the health standard limitation on the concentration of formaldehyde for indoor air. Moreover, the strategy to synthesize the nanobundles is just two-step heating and easy to scale up. Therefore, the Ag-modified In2O3/ZnO bundles are ready for industrialization and practical applications.

| S-EPMC4570411 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data