Browse
Submit Data
Databases
API
Help

Dataset Information

0 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Nucleation and Ostwald Growth of Particles in Fe-O-Al-Ca Melt.

ABSTRACT: Tremendous focus has been put on the control of particle size distribution which effects the grain structure and mechanical properties of resulting metallic materials, and thus nucleation and growth of particles in solution should be clarified. This study uses classical nucleation theory and Ostwald ripening theory to probe the relationship between the compositions of Fe-O-Al-Ca melts and the behavior of particles under the condition of no external stirring. Our experimental data suggest that decreasing the initial Ca addition and Al addition is conductive to the increase of nucleation rate for calcium aluminate particles, which exhibits a same change trend with that predicted from classical nucleation theory. Based on the experimental evidence for particles size distribution in three-dimensional, we demonstrate that Ostwald ripening is the predominate mechanism on the coarsening of particles in Fe-O-Al-Ca melt at early stage of deoxidation under the condition of no external stirring but not at later stage.

SUBMITTER: Wang L

PROVIDER: S-EPMC5773526 | biostudies-literature | 2018 Jan

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Publications

Nucleation and Ostwald Growth of Particles in Fe-O-Al-Ca Melt.

Wang Linzhu L Li Junqi J Yang Shufeng S Chen Chaoyi C Jin Huixin H Li Xiang X

Scientific reports 20180118 1

Tremendous focus has been put on the control of particle size distribution which effects the grain structure and mechanical properties of resulting metallic materials, and thus nucleation and growth of particles in solution should be clarified. This study uses classical nucleation theory and Ostwald ripening theory to probe the relationship between the compositions of Fe-O-Al-Ca melts and the behavior of particles under the condition of no external stirring. Our experimental data suggest that de ...[more]

PMID: 29348615

Similar Datasets

Effect of Mg Treatment on the Nucleation and Ostwald Growth of Inclusions in Fe-O-Al-Mg Melt.

Project description:This study aimed to investigate the effect of Mg treatment on the nucleation and ostwald growth of inclusions. Deoxidized experiments with Al (0.05%Al) and Al-Mg (0.05%Al + 0.03%Mg) were carried out at 1873 K, and the composition, number, and size of inclusions were studied as a function of holding time. Homogeneous nucleation theory and ostwald ripening were utilized to calculate the nucleation rate, the critical size of nuclei, and coarsening rate of inclusions. The results show that small inclusions were more easily found in the steels with Al-Mg complex deoxidation, and the number of inclusions with Al-Mg complex deoxidation is larger at an early stage of deoxidation. The critical size of nuclei increases in the order of MgAl2O4 (0.3-0.4 nm) < Al2O3 (0.4-0.6 nm), and the nucleation rate increases in the order of Al2O3 (1100 cm-3 s-1) < MgAl2O4 (1200 cm-3s-1), which is consistent with the experimental results. Moreover, the coarsening rate of MgAl2O4 inclusions was smaller than Al2O3 inclusions in both the value of kd(cal.) from ostwald growth and the value of kd(obs.) from inclusion size. The effect of Mg addition on coarsening of inclusion was analyzed and their mechanism was discussed based on ostwald ripening theory and Factsage calculation.

| S-EPMC7435484 | biostudies-literature

Evidence of multi-step nucleation leading to various crystallization pathways from an Fe-O-Al melt.

Project description:The crystallization process from a solution begins with nucleation, which determines the structure and size of the resulting crystals. Further understanding of multi-pathway crystallizations from solution through two-step nucleation mechanisms is needed. This study uses density functional theory to probe the thermodynamic properties of alumina clusters at high temperature and reveals the thermodynamic relationship between these clusters and the saturation levels of dissolved oxygen and aluminum in an Fe-O-Al melt. Based on the thermodynamics of cluster formation and the experimental evidence for both excess oxygen in the Fe-O-Al melt and for alumina with a polycrystalline structure in solidified iron, we demonstrate that the appearance of various types of clusters that depends on the saturation ratio determines the nucleation steps that lead to the various crystallization pathways. Such mechanisms may also be important in nucleation and crystallization from solution.

| S-EPMC4035573 | biostudies-literature

Thermodynamic insight into the growth of nanoscale inclusion of Al-deoxidation in Fe-O-Al melt.

Project description:Products of Al-deoxidation reaction in iron melt are the most common inclusions and play an important effect on steel performance. Understanding the thermodynamics on nano-alumina (or nano-hercynite) is very critical to explore the relationship between Al-deoxidation reaction and products growth in iron melt. In present study, a thermodynamic modeling of nano-alumina inclusions in Fe-O-Al melt has been developed. The thermodynamic results show that the Gibbs free energy changes for the formation of nano-Al2O3 and nano-FeAl2O4 decrease with the increasing size and increase with the increasing temperature. The Gibbs free energy changes for transformation of nano-Al2O3 into bulk-Al2O3 increase with the increasing size and temperature. The thermodynamic curve of nano-alumina (or nano-hercynite) and the equilibrium curve of bulk-alumina (or bulk-hercynite) obtained in this work are agree with the published experimental data of Al-deoxidation equilibria in liquid iron. In addition, the thermodynamic coexisting points about Al2O3 and FeAl2O4 in liquid iron are in a straight line and coincide with the various previous data. It suggested that these scattered experimental data maybe in the different thermodynamic state of Al-deoxidized liquid iron and the reaction products for most of the previous Al-deoxidation experiments are nano-alumina (or nano-hercynite).

| S-EPMC7547113 | biostudies-literature

Immiscible hydrous Fe-Ca-P melt and the origin of iron oxide-apatite ore deposits.

Project description:The origin of iron oxide-apatite deposits is controversial. Silicate liquid immiscibility and separation of an iron-rich melt has been invoked, but Fe-Ca-P-rich and Si-poor melts similar in composition to the ore have never been observed in natural or synthetic magmatic systems. Here we report experiments on intermediate magmas that develop liquid immiscibility at 100?MPa, 1000-1040?°C, and oxygen fugacity conditions (fO2) of ?FMQ?=?0.5-3.3 (FMQ?=?fayalite-magnetite-quartz equilibrium). Some of the immiscible melts are highly enriched in iron and phosphorous?±?calcium, and strongly depleted in silicon (<5?wt.% SiO2). These Si-poor melts are in equilibrium with a rhyolitic conjugate and are produced under oxidized conditions (~FMQ?+?3.3), high water activity (aH2O???0.7), and in fluorine-bearing systems (1?wt.%). Our results show that increasing aH2O and fO2 enlarges the two-liquid field thus allowing the Fe-Ca-P melt to separate easily from host silicic magma and produce iron oxide-apatite ores.

| S-EPMC5897329 | biostudies-literature

Remarkable nucleation and growth of ultrafine particles from vehicular exhaust.

Project description:High levels of ultrafine particles (UFPs; diameter of less than 50 nm) are frequently produced from new particle formation under urban conditions, with profound implications on human health, weather, and climate. However, the fundamental mechanisms of new particle formation remain elusive, and few experimental studies have realistically replicated the relevant atmospheric conditions. Previous experimental studies simulated oxidation of one compound or a mixture of a few compounds, and extrapolation of the laboratory results to chemically complex air was uncertain. Here, we show striking formation of UFPs in urban air from combining ambient and chamber measurements. By capturing the ambient conditions (i.e., temperature, relative humidity, sunlight, and the types and abundances of chemical species), we elucidate the roles of existing particles, photochemistry, and synergy of multipollutants in new particle formation. Aerosol nucleation in urban air is limited by existing particles but negligibly by nitrogen oxides. Photooxidation of vehicular exhaust yields abundant precursors, and organics, rather than sulfuric acid or base species, dominate formation of UFPs under urban conditions. Recognition of this source of UFPs is essential to assessing their impacts and developing mitigation policies. Our results imply that reduction of primary particles or removal of existing particles without simultaneously limiting organics from automobile emissions is ineffective and can even exacerbate this problem.

| S-EPMC7035480 | biostudies-literature

Synthesis of Al₂Ca Dispersoids by Powder Metallurgy Using a Mg-Al Alloy and CaO Particles.

Project description:The elemental mixture of Mg-6 wt %Al-1 wt %Zn-0.3 wt %Mn (AZ61B) alloy powder and CaO particles was consolidated by an equal-channel angular bulk mechanical alloying (ECABMA) process to form a composite precursor. Subsequently, the precursor was subjected to a heat treatment to synthesize fine Al₂Ca particles via a solid-state reaction between the Mg-Al matrix and CaO additives. Scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS) and electron probe micro-analysis on the precursor indicated that 4.7-at % Al atoms formed a supersaturated solid solution in the α-Mg matrix. Transmission electron microscopy-EDS and X-ray diffraction analyses on the AZ61B composite precursor with 10-vol % CaO particles obtained by heat treatment confirmed that CaO additives were thermally decomposed in the Mg-Al alloy, and the solid-soluted Ca atoms diffused along the α-Mg grain boundaries. Al atoms also diffused to the grain boundaries because of attraction to the Ca atoms resulting from a strong reactivity between Al and Ca. As a result, needle-like (Mg,Al)₂Ca intermetallics were formed as intermediate precipitates in the initial reaction stage during the heat treatment. Finally, the precipitates were transformed into spherical Al₂Ca particles by the substitution of Al atoms for Mg atoms in (Mg,Al)₂Ca after a long heat treatment.

| S-EPMC5551759 | biostudies-other

Regiospecific Nucleation and Growth of Silane Coupling Agent Droplets onto Colloidal Particles.

Project description:Nucleation-and-growth processes are used extensively in the synthesis of spherical colloids, and more recently regiospecific nucleation-and-growth processes have been exploited to prepare more complex colloids such as patchy particles. We demonstrate that surface geometry alone can be made to play the dominant role in determining the final particle geometry in such syntheses, meaning that intricate chemical surface patternings are not required. We present a synthesis method for "lollipop"-shaped colloidal heterodimers (patchy particles), combining a recently published nucleation-and-growth technique with our recent findings that particle geometry influences the locus of droplet adsorption onto anisotropic template particles. Specifically, 3-methacryloxypropyl trimethoxysilane (MPTMS) is nucleated and grown onto bullet-shaped and nail-shaped colloids. The shape of the template particle can be chosen such that the MPTMS adsorbs regiospecifically onto the flat ends. In particular, we find that particles with a wider base increase the range of droplet volumes for which the minimum in the free energy of adsorption is located at the flat end of the particle compared with bullet-shaped particles of the same aspect ratio. We put forward an extensive analysis of the synthesis mechanism and experimentally determine the physical properties of the heterodimers, supported by theoretical simulations. Here we numerically optimize, for the first time, the shape of finite-sized droplets as a function of their position on the rod-like silica particle surface. We expect that our findings will give an impulse to complex particle creation by regiospecific nucleation and growth.

| S-EPMC5645761 | biostudies-literature

Bacteriophage Bundles with Pre-Aligned Ca Initiate the Oriented Nucleation and Growth of Hydroxylapatite.

Project description:Inorganic ions may direct the self-assembly of biomacromolecules into nanostructures which can further be used as a reactant and matrix for nanomaterials synthesis and assembly. Here we use bone mineral and filamentous bacteriophage as a model to demonstrate this concept. Divalent calcium ions are found to trigger the electrostatic self-assembly of anionic nanofiber-like bacteriophages into bundle structures where calcium ions are pre-organized between bacteriophage nanofibers. The resultant Ca(2+)-bacteriophage bundles can be separated and purified from the aqueous solution. The nanostructures of the bundles are verified by zeta potential analysis, small angle x-ray scattering and transmission electron microscopy. Because of the transcription of the bacteriophage chiral surface to the periodic alignment of pre-loaded Ca(2+), the Ca(2+)-bacteriphage bundles can serve as both Ca sources and biotemplates to initiate the oriented nucleation and growth of nanocrystalline hydroxyapatite in phosphate solution or in simulated body fluid. This work provides new insights into biomineralization and represents a new approach to the fabrication of biomolecular-inorganic hybrid layered nanostructures.

| S-EPMC2926989 | biostudies-literature

Research on homogeneous nucleation and microstructure evolution of aluminium alloy melt.

Project description:In this paper, based on the embedded atom method (EAM) potential, molecular dynamics simulations of the solidification process of Al-4 at.%Cu alloy is carried out. The Al-Cu alloy melt is placed at different temperatures for isothermal solidification, and each stage of the entire solidification process is tracked, including homogeneous nucleation, nucleus growth, grain coarsening and microstructure evolution. In the nucleation stage, the transition from high temperature to low temperature manifests a change from spontaneous nucleation mode to divergent nucleation mode. The critical nucleation temperature of the Al-Cu alloy is determined to be about 0.42 T m (T m is the melting point of Al-4 at.%Cu) by calculating the nucleation rate and the crystal nucleus density. In the nucleus growth stage, two ways of growing up are observed, that is, a large crystal nucleus will absorb a smaller heterogeneous crystal nucleus, and two very close crystal nuclei will merge. In the microstructure evolution of the isothermally solidified Al-Cu alloy, it is emerged that the interior of all nanocrystalline grains are long-period stacking structure composed of face centred cubic (FCC) and hexagonal close-packed (HCP). These details provide important information for the production of Al-Cu binary alloy nano-polycrystalline products.

| S-EPMC8371370 | biostudies-literature

Dealkalization and Leaching Behavior of Fe, Al, Ca, and Si of Red Mud by Waste Acid from Titanium White Production.

Project description:Dealkalization is the necessary step for the multipurpose use of red mud (RM), and acid leaching is a productive method to realize the dealkalization of RM. Most researches focus on recovering metals from the highly alkaline waste by pure acid leaching or stabilization by dealkalization. In this study, according to the strong alkalinity of RM and strong acidity of the waste acid from titanium dioxide production, the waste acid was used for the dealkalization of RM. The effects of leaching temperature, reaction time, the concentration of waste acid, liquid-solid ratio (L/S), and stirring rate on the dealkalization of RM were investigated, and the main metal ions in the dealkalization solution were analyzed. The results show that the leaching ratio of sodium can reach 92.3591% when the leaching temperature is 30 °C, the reaction time is 10 min, the concentration of waste acid is 0.6238 mol/L, the L/S is 4:1, and the stirring rate is 300 rpm. The residual alkali content in the treated RM is 0.2674%, which is a reduction to less than 1%. The phase analysis results show that the sodalite and cancrinite in RM are dissolved, decomposed, and transformed after acid leaching. Therefore, RM meets the requirements of building materials after dealkalization, which provides further development as building material products.

| S-EPMC8655946 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data