Browse
Submit Data
Databases
API
Help

Dataset Information

7 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Synthesis of Al₂Ca Dispersoids by Powder Metallurgy Using a Mg-Al Alloy and CaO Particles.

ABSTRACT: The elemental mixture of Mg-6 wt %Al-1 wt %Zn-0.3 wt %Mn (AZ61B) alloy powder and CaO particles was consolidated by an equal-channel angular bulk mechanical alloying (ECABMA) process to form a composite precursor. Subsequently, the precursor was subjected to a heat treatment to synthesize fine Al₂Ca particles via a solid-state reaction between the Mg-Al matrix and CaO additives. Scanning electron microscopy-energy-dispersive spectroscopy (SEM-EDS) and electron probe micro-analysis on the precursor indicated that 4.7-at % Al atoms formed a supersaturated solid solution in the α-Mg matrix. Transmission electron microscopy-EDS and X-ray diffraction analyses on the AZ61B composite precursor with 10-vol % CaO particles obtained by heat treatment confirmed that CaO additives were thermally decomposed in the Mg-Al alloy, and the solid-soluted Ca atoms diffused along the α-Mg grain boundaries. Al atoms also diffused to the grain boundaries because of attraction to the Ca atoms resulting from a strong reactivity between Al and Ca. As a result, needle-like (Mg,Al)₂Ca intermetallics were formed as intermediate precipitates in the initial reaction stage during the heat treatment. Finally, the precipitates were transformed into spherical Al₂Ca particles by the substitution of Al atoms for Mg atoms in (Mg,Al)₂Ca after a long heat treatment.

SUBMITTER: Fujita J

PROVIDER: S-EPMC5551759 | biostudies-other | 2017 Jun

REPOSITORIES: biostudies-other

ACCESS DATA

Json Xml

Similar Datasets

Synthesis of a bulk nanostructured metastable Al alloy with extreme supersaturation of Mg.

Project description:Nanostructuring of bulk metals is now well documented with the development of severe plastic deformation (SPD) for improving the physical and mechanical properties of engineering materials. Processing by high-pressure torsion (HPT), which was developed initially as a grain refinement technique, was extended recently to the mechanical bonding of dissimilar metals during nanostrcturing which generally involves significant microstructural heterogeneity. Here we introduce, for the first time, a bulk metastable Al-Mg supersaturated solid solution by the diffusion bonding of separate Al and Mg metal solids at room temperature using HPT. Exceptional hardness was achieved homogeneously throughout the metastable alloy with a record maximum supersaturated Mg content of ~38.5 at.% in the Al matrix having a grain size of ~35-40 nm. Our results demonstrate the synthesis of a bulk nanocrystalline metastable alloy with good microstructural stability at room temperature where such bulk solids are not yet reported for mechanical alloying by powder metallurgy.

| S-EPMC6868221 | biostudies-literature

Study on Mg/Al Weld Seam Based on Zn-Mg-Al Ternary Alloy.

Project description:Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded joints were improved with the increasing of the Al content in the Zn-xAl filler metals, and when Zn-30Al was used as the filler metal, the ultimate tensile strength could reach a maximum of 120 MPa. The reason for the average tensile strength of the joint increasing was that the weak zone of the joint using Zn-30Al filler metal was generated primarily by α-Al instead of MgZn2. When Zn-40Al was used as the filler metal, a new transition zone, about 20 μm-wide, appeared in the edge of the fusion zone near the Mg base metal. Due to the transition zones consisting of MgZn₂- and Al-based solid solution, the mechanical property of the joints was deteriorated.

| S-EPMC5453102 | biostudies-other

Powder Metallurgy Processing of a WxTaTiVCr High-Entropy Alloy and Its Derivative Alloys for Fusion Material Applications.

Project description:The WxTaTiVCr high-entropy alloy with 32at.% of tungsten (W) and its derivative alloys with 42 to 90at.% of W with in-situ TiC were prepared via the mixing of elemental W, Ta, Ti, V and Cr powders followed by spark plasma sintering for the development of reduced-activation alloys for fusion plasma-facing materials. Characterization of the sintered samples revealed a BCC lattice and a multi-phase structure. The selected-area diffraction patterns confirmed the formation of TiC in the high-entropy alloy and its derivative alloys. It revealed the development of C15 (cubic) Laves phases as well in alloys with 71 to 90at.% W. A mechanical examination of the samples revealed a more than twofold improvement in the hardness and strength due to solid-solution strengthening and dispersion strengthening. This study explored the potential of powder metallurgy processing for the fabrication of a high-entropy alloy and other derived compositions with enhanced hardness and strength.

| S-EPMC5434025 | biostudies-literature

The Behaviour of Bifilm Defects in Cast Al-7Si-Mg Alloy.

Project description:Double oxide films (bifilms) are significant defects in the casting of light alloys, and have been shown to decrease tensile and fatigue properties, and also to increase their scatter, making casting properties unreproducible and unreliable. A bifilm consists of doubled-over oxide films containing a gas-filled crevice and is formed due to surface turbulence of the liquid metal during handling and/or pouring. Previous studies has shown that the nature of oxide film defects may change with time, as the atmosphere inside the bifilm could be consumed by reaction with the surrounding melt, which may enhance the mechanical properties of Al alloy castings. As a proxy for a bifilm, an air bubble was trapped within an Al-7wt.%Si-0.3wt.%Mg (2L99) alloy melt, subjected to stirring. The effect of different parameters such as the holding time, stirring velocity and melt temperature on the change in gas composition of the bubble was investigated, using a design of experiments (DoE) approach. Also, the solid species inside the bubbles solidified in the melt were examined using SEM. The results suggested that both oxygen and nitrogen inside the bifilm would be consumed by reaction with the surrounding melt producing MgAl2O4 and AlN, respectively. Also, hydrogen was suggested to consistently diffuse into the defect. The reaction rates and the rate of H diffusion were shown to increase upon increasing the holding time and temperature, and stirring velocity. Such significant effect of the process parameters studied on the gaseous content of the bubble suggesting that a careful control of such parameters might lead to the deactivation of bifilm defects, or at least elimination of their deteriorous effect in light alloy castings.

| S-EPMC4987044 | biostudies-literature

Refining Mechanism of 7075 Al Alloy by In-Situ TiB? Particles.

Project description:The nucleation undercooling of TiB?/7075 Al matrix composites, the microstructure observed after solidification at different cooling rate, and the size and distribution of TiB? particles were investigated. The experimental results have shown that the grain sizes of TiB?/7075 Al matrix composites firstly decreased, then increased, and finally decreased again with the increase of TiB? content. The nucleation undercooling of TiB?/7075 Al matrix composites first increased, then decreased, and finally increased again with the increase of TiB? content when the cooling rates was 5 and 10 °C/min respectively, but kept decreasing with the increase of TiB? content at a cooling rate of 20 °C/min. The melting and solidification process showed no significant change with the decrease of cooling rate in 9.0% TiB?/7075 Al matrix composites. Most small particles can act as heterogeneous nucleus, which induced grain growth and were captured into the grain by the solid/liquid interface. At the same time, most of the larger particles and a minority of the small TiB? particles are pushed into the grain boundary; locating in the grain boundary can hinder the Al atoms from diffusing during the solidification process and restrain ?-Al phase growth. The influence of particles shifted from dominating by locating to dominating by nucleation as the quantity of TiB? particles increased.

| S-EPMC5459188 | biostudies-literature

Nano-scale characterisation of sheared ?" precipitates in a deformed Al-Mg-Si alloy.

Project description:This paper compares the nano-scale structure of ?" precipitates in a peak-aged Al-Mg-Si alloy before and after deformation. Three complementary advanced transmission electron microscopy techniques are used to reveal the structures and elucidate the interaction between dislocations and ?" precipitates. We show that the needle-like and semi-coherent ?" precipitates are sheared several times on different planes by dislocations during deformation, with no indications that they are bypassed or looped. Our results show that dislocations cut through precipitates and leave behind planar defects lying on planes inclined to ?100? directions inside the precipitates. The results also indicate that precipitates are sheared in single steps, and the implication of this observation is discussed in terms of slip behaviour.

| S-EPMC6877512 | biostudies-literature

Structural and compositional study of precipitates in under-aged Cu-added Al-Mg-Si alloy.

Project description:Atomic scale characterization of fine precipitates in an under-aged Cu added Al-Mg-Si alloy was carried out by combination of atomically-resolved annular dark-field scanning transmission electron microscopy and energy dispersive X-ray spectroscopy. Two types of precipitates were observed in the alloy. In the case of ordered ?" precipitates, ?" was proposed as Mg5-xAl2+xSi4 (x ? 1) with solute Cu atoms replacing Al site of ?" precipitate. In the case of disordered precipitates, the precipitates were found to consist of ?" sub-unit cells, three-fold symmetric structure without Cu atoms, Cu containing structures termed as "Cu sub-unit cluster", and Q' sub-unit cells. Among these structures, the morphologies of three-fold symmetric structure without Cu atoms, Cu sub-unit cluster, and Q' sub-unit cell were almost the same, so that these structures should be the clusters of Q' phase. Since the areal density, length and diameter of precipitates were almost equal between Cu free Al-Mg-Si alloy and Cu added Al-Mg-Si alloy, the increase of hardness by Cu addition should be due to the precipitation of Cu related precipitates, such as Cu sub-unit clusters and Q' sub-unit cells.

| S-EPMC6226491 | biostudies-literature

FeSiCr Alloy Powder to Carbonyl Iron Powder Mixing Ratio Effects on the Magnetic Properties of the Iron-Based Alloy Powder Cores Prepared Using Screen Printing.

Project description:A screen printing process was used to substitute dry molding to solve the uneven compaction problem in the coil center column during molding in this study. FeSiCr alloy powders (FSC) with a large particle size were mixed with fine spherical carbonyl iron powder to increase the compaction density. FSC to carbonyl iron powder (CIP) mixing ratio effects on magnetic paste rheological behaviors and magnetic properties of the molding coil prepared using screen printing were investigated. A magnetic paste with the lowest viscosity can be obtained using 3C7F (30% CIP + 70% FSC) due to the small-sized CIP adsorbed onto the FSC surface. This process reduces the interlocked network formation resulting from the CIP. The toroidal core with 3C7F exhibited the highest relative density and highest inductance. The coils with pure CIP and higher CIP content exhibited the better DC superposition characteristic. The toroidal core loss increased rapidly as the FSC content was increased. A proper trade-off between the inductance, DC-bias superposition characteristic, and magnetic core loss can be reached by choosing a suitable powder mixing ratio.

| S-EPMC7926424 | biostudies-literature

Nucleation and Ostwald Growth of Particles in Fe-O-Al-Ca Melt.

Project description:Tremendous focus has been put on the control of particle size distribution which effects the grain structure and mechanical properties of resulting metallic materials, and thus nucleation and growth of particles in solution should be clarified. This study uses classical nucleation theory and Ostwald ripening theory to probe the relationship between the compositions of Fe-O-Al-Ca melts and the behavior of particles under the condition of no external stirring. Our experimental data suggest that decreasing the initial Ca addition and Al addition is conductive to the increase of nucleation rate for calcium aluminate particles, which exhibits a same change trend with that predicted from classical nucleation theory. Based on the experimental evidence for particles size distribution in three-dimensional, we demonstrate that Ostwald ripening is the predominate mechanism on the coarsening of particles in Fe-O-Al-Ca melt at early stage of deoxidation under the condition of no external stirring but not at later stage.

| S-EPMC5773526 | biostudies-literature

Characterisation of a High-Performance Al-Zn-Mg-Cu Alloy Designed for Wire Arc Additive Manufacturing.

Project description:Ever-increasing demands of industrial manufacturing regarding mechanical properties require the development of novel alloys designed towards the respective manufacturing process. Here, we consider wire arc additive manufacturing. To this end, Al alloys with additions of Zn, Mg and Cu have been designed considering the requirements of good mechanical properties and limited hot cracking susceptibility. The samples were produced using the cold metal transfer pulse advanced (CMT-PADV) technique, known for its ability to produce lower porosity parts with smaller grain size. After material simulations to determine the optimal heat treatment, the samples were solution heat treated, quenched and aged to enhance their mechanical performance. Chemical analysis, mechanical properties and microstructure evolution were evaluated using optical light microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray fluorescence analysis and X-ray radiography, as well as tensile, fatigue and hardness tests. The objective of this research was to evaluate in detail the mechanical properties and microstructure of the newly designed high-performance Al-Zn-based alloy before and after ageing heat treatment. The only defects found in the parts built under optimised conditions were small dispersed porosities, without any visible cracks or lack of fusion. Furthermore, the mechanical properties are superior to those of commercial 7xxx alloys and remarkably independent of the testing direction (parallel or perpendicular to the deposit beads). The presented analyses are very promising regarding additive manufacturing of high-strength aluminium alloys.

| S-EPMC7178362 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data