Browse
Submit Data
Databases
API
Help

Dataset Information

21 Views

0 Connections

0 Citations

0 Reanalyses

0 Downloads

Omics score: 0

Effect of Magnesium Incorporation on Solution-Processed Kesterite Solar Cells.

ABSTRACT: The introduction of the alkaline-earth element Magnesium (Mg) into Cu2ZnSn(S,Se)4 (CTZSSe) is explored in view of potential photovoltaic applications. Cu2Zn1-xMgxSn(S,Se)4 absorber layers with variable Mg content x = 0…1 are deposited using the solution approach with dimethyl sulfoxide solvent followed by annealing in selenium atmosphere. For heavy Mg alloying with x = 0.55…1 the phase separation into Cu2SnSe3, MgSe2, MgSe and SnSe2 occurs in agreement with literature predictions. A lower Mg content of x = 0.04 results in the kesterite phase as confirmed by XRD and Raman spectroscopy. A photoluminescence maximum is red-shifted by 0.02 eV as compared to the band-gap and a carrier concentration NCV of 1 × 1016 cm-3 is measured for a Mg-containing kesterite solar cell device. Raman spectroscopy indicates that structural defects can be reduced in Mg-containing absorbers as compared to the Mg-free reference samples, however the best device efficiency of 7.2% for a Mg-containing cell measured in this study is lower than those frequently reported for the conventional Na doping.

SUBMITTER: Caballero R

PROVIDER: S-EPMC5790964 | biostudies-literature |

REPOSITORIES: biostudies-literature

ACCESS DATA

Json Xml

Similar Datasets

Recovery Mechanisms in Aged Kesterite Solar Cells

Project description:For successful long-term

| S-EPMC9131304 | biostudies-literature

Solution-processed small-molecule solar cells: breaking the 10% power conversion efficiency.

Project description:A two-dimensional conjugated small molecule (SMPV1) was designed and synthesized for high performance solution-processed organic solar cells. This study explores the photovoltaic properties of this molecule as a donor, with a fullerene derivative as an acceptor, using solution processing in single junction and double junction tandem solar cells. The single junction solar cells based on SMPV1 exhibited a certified power conversion efficiency of 8.02% under AM 1.5 G irradiation (100 mW cm(-2)). A homo-tandem solar cell based on SMPV1 was constructed with a novel interlayer (or tunnel junction) consisting of bilayer conjugated polyelectrolyte, demonstrating an unprecedented PCE of 10.1%. These results strongly suggest solution-processed small molecular materials are excellent candidates for organic solar cells.

| S-EPMC3842540 | biostudies-literature

Solution Processed PVB/Mica Flake Coatings for the Encapsulation of Organic Solar Cells.

Project description:Organic photovoltaics (OPVs) die due to their interactions with environmental gases, i.e., moisture and oxygen, the latter being the most dangerous, especially under illumination, due to the fact that most of the active layers used in OPVs are extremely sensitive to oxygen. In this work we demonstrate solution-based effective barrier coatings based on composite of poly(vinyl butyral) (PVB) and mica flakes for the protection of poly (3-hexylthiophene) (P3HT)-based organic solar cells (OSCs) against photobleaching under illumination conditions. In the first step we developed a protective layer with cost effective and environmentally friendly methods and optimized its properties in terms of transparency, barrier improvement factor, and bendability. The developed protective layer maintained a high transparency in the visible region and improved oxygen and moisture barrier quality by the factor of ~7. The resultant protective layers showed ultra-flexibility, as no significant degradation in protective characteristics were observed after 10 K bending cycles. In the second step, a PVB/mica composite layer was applied on top of the P3HT film and subjected to photo-degradation. The P3HT films coated with PVB/mica composite showed improved stability under constant light irradiation and exhibited a loss of <20% of the initial optical density over the period of 150 h. Finally, optimized barrier layers were used as encapsulation for organic solar cell (OSC) devices. The lifetime results confirmed that the stability of the OSCs was extended from few hours to over 240 h in a sun test (65 °C, ambient RH%) which corresponds to an enhanced lifetime by a factor of 9 compared to devices encapsulated with pristine PVB.

| S-EPMC8151763 | biostudies-literature

Solution-Processed Transparent Conducting Electrodes for Flexible Organic Solar Cells with 16.61% Efficiency.

Project description:Nonfullerene organic solar cells (OSCs) have achieved breakthrough with pushing the efficiency exceeding 17%. While this shed light on OSC commercialization, high-performance flexible OSCs should be pursued through solution manufacturing. Herein, we report a solution-processed flexible OSC based on a transparent conducting PEDOT:PSS anode doped with trifluoromethanesulfonic acid (CF3SO3H). Through a low-concentration and low-temperature CF3SO3H doping, the conducting polymer anodes exhibited a main sheet resistance of 35 Ω sq-1 (minimum value: 32 Ω sq-1), a raised work function (≈ 5.0 eV), a superior wettability, and a high electrical stability. The high work function minimized the energy level mismatch among the anodes, hole-transporting layers and electron-donors of the active layers, thereby leading to an enhanced carrier extraction. The solution-processed flexible OSCs yielded a record-high efficiency of 16.41% (maximum value: 16.61%). Besides, the flexible OSCs afforded the 1000 cyclic bending tests at the radius of 1.5 mm and the long-time thermal treatments at 85 °C, demonstrating a high flexibility and a good thermal stability.

| S-EPMC8187532 | biostudies-literature

A Simple and Effective Phosphine-Doping Technique for Solution-Processed Nanocrystal Solar Cells.

Project description:Solution-processed cadmium telluride (CdTe) nanocrystal (NC) solar cells offer the advantages of low cost, low consumption of materials and large-scale production via a roll-to-roll manufacture process. Undecorated CdTe NC solar cells, however, tend to show inferior performance due to the abundant crystal boundaries within the active CdTe NC layer. The introduction of hole transport layer (HTL) is effective for promoting the performance of CdTe NC solar cells. Although high-performance CdTe NC solar cells have been realized by adopting organic HTLs, the contact resistance between active layer and the electrode is still a large problem due to the parasitic resistance of HTLs. Here, we developed a simple phosphine-doping technique via a solution process under ambient conditions using triphenylphosphine (TPP) as a phosphine source. This doping technique effectively promoted the power conversion efficiency (PCE) of devices to 5.41% and enabled the device to have extraordinary stability, showing a superior performance compared with the control device. Characterizations suggested that the introduction of the phosphine dopant led to higher carrier concentration, hole mobility and a longer lifetime of the carriers. Our work presents a new and simple phosphine-doping strategy for further improving the performance of CdTe NC solar cells.

| S-EPMC10254249 | biostudies-literature

Optimization of solution-processed oligothiophene:fullerene based organic solar cells by using solvent additives.

Project description:The optimization of solution-processed organic bulk-heterojunction solar cells with the acceptor-substituted quinquethiophene DCV5T-Bu 4 as donor in conjunction with PC61BM as acceptor is described. Power conversion efficiencies up to 3.0% and external quantum efficiencies up to 40% were obtained through the use of 1-chloronaphthalene as solvent additive in the fabrication of the photovoltaic devices. Furthermore, atomic force microscopy investigations of the photoactive layer gave insight into the distribution of donor and acceptor within the blend. The unique combination of solubility and thermal stability of DCV5T-Bu 4 also allows for fabrication of organic solar cells by vacuum deposition. Thus, we were able to perform a rare comparison of the device characteristics of the solution-processed DCV5T-Bu 4 :PC61BM solar cell with its vacuum-processed DCV5T-Bu 4 :C60 counterpart. Interestingly in this case, the efficiencies of the small-molecule organic solar cells prepared by using solution techniques are approaching those fabricated by using vacuum technology. This result is significant as vacuum-processed devices typically display much better performances in photovoltaic cells.

| S-EPMC3817626 | biostudies-literature

Solution-processed intermediate-band solar cells with lead sulfide quantum dots and lead halide perovskites.

Project description:The intermediate-band solar cell (IBSC) with quantum dots and a bulk semiconductor matrix has potential for high power conversion efficiency, exceeding the Shockley-Queisser limit. However, the IBSCs reported to date have been fabricated only by dry process and their efficiencies are limited, because their photo-absorption layers have low particle density of quantum dots, defects due to lattice strain, and low bandgap energy of bulk semiconductors. Here we present solution-processed IBSCs containing photo-absorption layers where lead sulfide quantum dots are densely dispersed in methylammonium lead bromide perovskite matrices with a high bandgap energy of 2.3?eV under undistorted conditions. We confirm that the present IBSCs exhibit two-step photon absorption via intermediate-band at room temperature by inter-subband photocurrent spectroscopy.

| S-EPMC6327045 | biostudies-literature

Effects of solvent additive on "s-shaped" curves in solution-processed small molecule solar cells.

Project description:A novel molecular chromophore, p-SIDT(FBTThCA8)2, is introduced as an electron-donor material for bulk heterojunction (BHJ) solar cells with broad absorption and near ideal energy levels for the use in combination with common acceptor materials. It is found that films cast from chlorobenzene yield devices with strongly s-shaped current-voltage curves, drastically limiting performance. We find that addition of the common solvent additive diiodooctane, in addition to facilitating crystallization, leads to improved vertical phase separation. This yields much better performing devices, with improved curve shape, demonstrating the importance of morphology control in BHJ devices and improving the understanding of the role of solvent additives.

| S-EPMC5238578 | biostudies-literature

ZrSnO4: A Solution-Processed Robust Electron Transport Layer of Efficient Planar-Heterojunction Perovskite Solar Cells.

Project description:A robust electron transport layer (ETL) is an essential component in planar-heterojunction perovskite solar cells (PSCs). Herein, a sol-gel-driven ZrSnO4 thin film is synthesized and its optoelectronic properties are systematically investigated. The optimized processing conditions for sol-gel synthesis produce a ZrSnO4 thin film that exhibits high optical transmittance in the UV-Vis-NIR range, a suitable conduction band maximum, and good electrical conductivity, revealing its potential for application in the ETL of planar-heterojunction PSCs. Consequently, the ZrSnO4 ETL-based devices deliver promising power conversion efficiency (PCE) up to 19.05% from CH3NH3PbI3-based planar-heterojunction devices. Furthermore, the optimal ZrSnO4 ETL also contributes to decent long-term stability of the non-encapsulated device for 360 h in an ambient atmosphere (T~25 °C, RH~55%,), suggesting great potential of the sol-gel-driven ZrSnO4 thin film for a robust solution-processed ETL material in high-performance PSCs.

| S-EPMC8625985 | biostudies-literature

Comparison of the Solution and Vacuum-Processed Squaraine:Fullerene Small-Molecule Bulk Heterojunction Solar Cells.

Project description:Squaraine dyes have shown promising properties for high performance organic solar cells owing to their advantages of intense absorption and high absorption coefficients in the visible and near-infrared (NIR) regions. In this work, to directly compare the photovoltaic performance of solution- and vacuum-processed small-molecule bulk heterojunction (SMBHJ) solar cells, we employed a squaraine small molecular dye, 2,4-bis[4-(N,N-diisobutylamino)-2,6-dihydroxyphenyl] squaraine (DIBSQ), as an electron donor combined with fullerene acceptors to fabricate SMBHJ cells either from solution or vacuum deposition process. The solution-processed SMBHJ cell possesses a power conversion efficiency (PCE) of ~4.3%, while the vacuum-processed cell provides a PCE of ~6.3%. Comparison of the device performance shows that the vacuum-processed SMBHJ cells possess higher short-circuit current density, fill factor and thus higher PCE than the solution-processed devices, which should be assigned to more efficient charge transport and charge extraction in the vacuum-processed SMBHJ cells. However, solution-processed SMBHJ cells demonstrate more pronounced temperature-dependent device performance and higher device stability. This study indicates the great potential of DIBSQ in photovoltaic application via both of solution and vacuum processing techniques.

| S-EPMC6141623 | biostudies-literature

OmicsDI is part of the ELIXIR infrastructure

OmicsDI is an Elixir interoperability service. Learn more ›

Tweets

OmicsDI Databases

PRIDE
PeptideAtlas
MassIVE
JPOST Repository
Physiome Model Repository

EGA
EVA
ENA
LINCS
PAXDB
Cell Collective

MetaboLights
Metabolomics Workbench
MetabolomeExpress
GNPS
BioModels
FAIRDOMHub

ArrayExpress
dbGaP
ExpressionAtlas
GEO
NODE

Information

Databases
Help
API
Contact us
Code on GitHub
Terms of use
Submit Data